catena‐Poly[[copper(II)‐μ‐2‐[bis­(2‐pyridylmeth­yl)amino]butyrato‐κ4N,N′,N′′,O:κO′] perchlorate]

The copper(II) ion in the syn–anti carboxyl­ate‐bridged one‐dimensional zigzag chain title complex, {[Cu(C₁₆H₁₈N₃O₂)]ClO₄}_n, exhibits a distorted trigonal–bipyramidal environment. Two N atoms and one carboxyl­ate O atom of the ligand form the basal plane, while the axial positions are filled by an N atom of the ligand and one O atom belonging to the carboxyl­ate group of an adjacent mol­ecule. The crystal packing is enhanced by C—H⋯O(perchlorate) hydrogen bonds.     

Photophysics of aromatic molecules with low-lying pi sigma* states: excitation-energy dependence of fluorescence in jet-cooled aromatic nitriles

Excitation-energy dependence of fluorescence intensity and fluorescence lifetime has been measured for 4-dimethylaminobenzonitrile (DMABN), 4-aminobenzonitrile (ABN), 4-diisopropylaminobenzonitrile (DIABN), and 1-naphthonitrile (NN) in a supersonic free jet. In all cases, the fluorescence yield decreases rather dramatically, whereas the fluorescence lifetime decreases only moderately for S1 (pi pi*, L(b)) excess vibrational energy exceeding about 1000 cm(-1). This is confirmed by comparison of the normalized fluorescence excitation spectrum with the absorption spectrum of the compound in the vapor phase. The result indicates that the strong decrease in the relative fluorescence yield at higher energies is due mostly to a decrease in the radiative decay rate of the emitting state. Comparison of the experimental results with the TDDFT potential energy curves for excited states strongly suggests that the decrease in the radiative decay rate of the aminobenzonitriles at higher energies is due to the crossing of the pi pi* singlet state by the lower-lying pi sigma*(C[triple bond]N) singlet state of very small radiative decay rate. The threshold energy for the fluorescence "break-off" is in good agreement with the computed energy barrier for the pi pi*/pi sigma* crossing. For NN, on the other hand, the observed decrease is in fluorescence yield at higher excitation energies can best be attributed to the crossing of the pi pi* singlet state by the pi sigma* triplet state.     

Ground-state properties and static dipole polarizabilities of the alkali dimers from K2 n to Fr2 n(n=0,+1) from scalar relativistic pseudopotential coupled cluster and density functional studies

The newly adjusted energy-consistent nine-valence-electron pseudopotentials for K to Fr are used to calculate spectroscopic properties for the neutral and positively charged alkali dimers using coupled cluster and density functional theory. For the neutral dimers the static dipole polarizability was calculated. The coupled cluster results are all in excellent agreement with experimental values. The density functionals used can give quite different spectroscopic properties especially for the dipole polarizability, with the Perdew-Wang PW91 functional performing best.     

Binding of methyl orange and its homologs by powdered nylon 612: Peculiar temperature dependence on the binding

The ability of powdered Nylon 612 to bind methyl orange, ethyl orange, propyl orange, and butyl orange was investigated at 5, 15, 25 and 35°C in an aqueous solution. The amount of binding of the dye is much higher with this polyamide than with powdered Nylon 66 reported previously,¹ although the former polymer has fewer amide end groups. The Van't Hoff plots of the first binding constant for the binding of butyl orange and propyl orange by powdered Nylon 612 exhibit a bell-shaped curve, whereas the plots for methyl orange and ethyl orange do not. Maximal binding occurs at approximately 15°C for propyl orange and at about 25°C for butyl orange. This is the first instance where the peculiar temperature dependence of the binding constant has been found in the binding of propyl orange, whose hydrophobicity is less than that of butyl orange. These tendencies can be accounted for in terms of increased hydrophobic of butyl orange. These tendencies can be accounted for in terms of increased hydrophobic domains in powdered Nylon 612 and enhanced hydrophobic contributions in the binding process.     

A massively parallel electrochemical approach to the miniaturization of organic micro- and nanostructures on surfaces

This paper describes a simple and convenient strategy for reducing the dimensions of organic micro-and nanostructures on metal surfaces. By varying electrochemical desorption conditions, features patterned by dip-pen nanolithography or micro contact printing and made of linear alkanethiols or selenols can be gradually desorbed in a controlled fashion. The process is referred to as electrochemical whittling because the adsorbate desorption is initiated at the exterior of the feature and moves inward as a function of time. The whittling process and adsorbate desorption were studied as a function of substrate morphology, adsorbate head and tail groups, and electrolyte solvent and salt. Importantly, one can independently address different nanostructures made of different adsorbates and effect their miniaturization based upon ajudicious selection of adsorbate, applied potential, and supporting electrolyte. Some of the physical and chemical origins of these observations have been elucidated.     

Inhibitory effects of 1,3-selenazol-4-one derivatives on mushroom tyrosinase

This study reports depigmenting potency of 1,3-selenazol-4-one derivatives, which would be based upon the finding of direct inhibition to mushroom tyrosinase. 1,3-Selenazol-4-one derivatives exhibited inhibitory effect on dopa oxidase activity of mushroom tyrosinase. In this study, inhibitory effects of six kinds of 1,3-selenazol-4-one derivatives (A, B, C, D, E and F) on mushroom tyrosinase were investigated. Compounds at a concentration of 500 microM exhibited 33.4-62.1% of inhibition on dopa oxidase activity of mushroom tyrosinase. Their inhibitory effects were higher than that of kojic acid (31.7%), a well known tyrosinase inhibitor. 2-(4-Methylphenyl)-1,3-selenazol-4-one (A) exhibited the strongest inhibitory effect among them dose-dependently and in competitive inhibition manner.     

Ortho alkylation of aromatic ketimine with functionalized alkene by Rh(I) catalyst

[reaction: see text] The reaction of the imine of aromatic ketones with functionalized alkenes was performed under a catalytic amount of (PPh3)3RhCl, and corresponding ortho-alkylated ketones were obtained after hydrolysis. A variety of functional groups in the alkene were tolerated in this ortho alkylation. This procedure expands the scope of ortho alkylation to the direct ortho functionalization of aromatic ketones.     

Ratiometric chemosensing of Mg ions by a calix[4]arene diamide derivative

A new chemosensor with a phenanthroimidazole subunit based upon calix[4]arene-diamide has been synthesized, and its Mg²⁺-selective fluoroionophoric properties were investigated in an aqueous DMSO solution. The compound exhibited a pronounced Mg²⁺-selective fluoroionophoric behavior over other physiologically relevant metal ions. A significant red shift in fluorescence emission (Δλ = 86 nm) provided the ratiometric determination as well as naked-eye detection of Mg²⁺ ions.     

Enzyme-linked immunosorbent assay for the determination of 20(S)-protopanaxatriol

A highly sensitive and specific enzyme-linked immunosorbent assay (ELISA) method has been developed for the determination of 20(S)-protopanaxatriol (PPT), one of the major aglycones of dammarane-type ginseng saponins. Polyclonal antibodies raised against ginsenoside F₁ (GF₁)-bovine serum albumin showed high reactivities to PPT and GF₁, whereas they exhibited minor or even no cross-reactivities to other ginsenosides and protopanaxadiol (0.19%). The working range of this method extends from 50 pg ml⁻¹ to 20 ng ml⁻¹ of PPT. The assay reported here has been validated against an HPLC technique using PPT-containing samples and was shown to correlate closely (γ=0.993). This ELISA could be a useful tool for the determination of PPT contained in biological fluids and plant materials.     

X-ray spectroscopy of enzyme active site analogues and related molecules: bis(dithiolene)molybdenum(IV) and -tungsten(IV,VI) complexes with variant terminal ligands

The X-ray absorption spectra at the molybdenum and selenium K-edges and the tungsten L2,3-edges are acquired for a set of 14 Mo(IV) and W(IV,VI) bis(dithiolene) complexes related to the active sites of molybdo- and tungstoenzymes. The set includes square pyramidal [MoIVL(S2C2Me2)2]- (L = O2-, R3SiO-, RO-, RS-, RSe-) and [WIV(OR)(S2C2Me2)2]-, distorted trigonal prismatic [MoIV(CO)(SeR)(S2C2Me2)2]- and [WIV(CO)L(S2C2Me2)2]- (L = RS-, RSe-), and distorted octahedral [WVIO(OR)(S2C2Me2)2]-. The dithiolene simulates the pterin-dithiolene cofactor ligand, and L represents a protein ligand. Bond lengths are determined by EXAFS analysis using the GNXAS protocol. Normalized edge spectra, non-phase-shift-corrected Fourier transforms, and EXAFS data and fits are presented. Bond lengths determined by EXAFS and X-ray crystallography agree to < or = 0.02 A as do the M-Se distances determined by both metal and selenium EXAFS. The complexes [MoIV(QR)(S2C2Me2)2]- simulate protein ligation by the DMSO reductase family of enzymes, including DMSO reductase itself (Q = O), dissimilatory nitrate reductase (Q = S), and formate dehydrogenase (Q = Se). Edge shifts of these complexes correlate with the ligand electronegativities. Terminal ligand binding is clearly distinguished in the presence of four Mo-S(dithiolene) interactions. Similarly, five-coordinate [ML(S2C2Me2)2]- and six-coordinate [M(CO)L(S2C2Me2)2]- are distinguishable by edge and EXAFS spectra. This study expands a previous XAS investigation of bis(dithiolene)metal(IV,V,VI) complexes (Musgrave, K. B.; Donahue, J. P.; Lorber, C.; Holm, R. H.; Hedman, B.; Hodgson, K. O. J. Am. Chem. Soc. 1999, 121, 10297) by including a larger inventory of molecules with variant physiologically relevant terminal ligation. The previous and present XAS results should prove useful in characterizing and refining metric features and structures of enzyme sites.