Decomposition behaviors of various crystalline celluloses as treated by semi-flow hot-compressed water

Various types of crystalline cellulose consisting of group I (cell I, III_I, IV_I) and group II (cell II, III_II, IV_II) prepared from cotton linter were adjusted for their degree of polymerization (DP) as starting materials. These celluloses were then treated by semi-flow hot-compressed water (HCW) at 230–270 °C/10 MPa/2–15 min to study their decomposition behaviors. The treatments performed resulted in residues of celluloses and water-soluble (WS) portions. Consequently, the crystallinity of the residues was found to remain the same, but the DP was reduced as the temperature increased. Additionally, X-ray diffractometry and Fourier transform-infrared analyses demonstrated that crystallographic changes occurred for residues of cell III_I, IV_I and III_II. Despite these changes, the overall results of the residues showed that group I has higher resistance to decomposing than group II. As for the WS portions, the yields of the hydrolyzed and degraded products were higher in group II than group I, indicating that group II is less resistant to decomposition by HCW treatment. Results for both the residues and WS portions are in agreement with each other, showing that the degree of difficulty of decomposition was higher in group I than group II. Therefore, the decomposition behaviors of the celluloses are due to differences in the crystalline forms.     

Ultra-narrow interval angular control signal for holographic data storage system

Optical Review - A precise and fast method for controlling the reference-beam angle of an angular-multiplexed holographic data storage system (HDSS)—to achieve larger capacity and faster...     

Assembly of Na3V2(PO4)3 Nanoparticles Confined in a One‐Dimensional Carbon Sheath for Enhanced Sodium‐Ion Cathode Properties

Structural and morphological control is an effective approach for improvement of electrochemical properties in rechargeable batteries. One‐dimensionally assembled structure composed of NASICON‐type Na₃V₂(PO₄)₃ nanoparticles were fabricated through an electrospinning method to meet the requirements for the development of efficient electrode materials in Na‐ion batteries. High‐temperature treatment of electrospun precursor fibers under an argon flow provides a nonwoven fabric of nanowires comprising crystallographically oriented nanoparticles of NASICON‐type Na₃V₂(PO₄)₃ within a carbon sheath. The mesostructure comprising NASICON‐type Na₃V₂(PO₄)₃ and carbon give a short sodium‐ion transport pass and an efficient electron conduction pass. Electrochemical properties of NASICON‐type Na₃V₂(PO₄)₃ are improved on the basis of one‐dimensional nanostructures designed in the present study.     

Dissipative crystallization of aqueous mixtures of potassium salts of poly(riboguanylic acid) and poly(ribocytidylic acid)

Drying patterns of aqueous solutions of potassium salts of poly(riboguanylic acid) (KPolyG), poly(ribocytidylic acid) (KPolyC), and their mixtures KPolyG + KPolyC were studied on a cover glass, a watch glass, and a glass dish at room temperature. Accumulation of the polymers forming the broad rings near the outside edge and also in the inner area of the dried film was observed. The fine multiple ring structures formed, which supports the fact that the affinity of the polymer with the substrate is strong. Typical microscopic drying patterns of KPolyG, KPolyC, and KPolyG + KPolyC were spherulites, dendritic long rods, and sword (harberd)-like rods, respectively. The patterns changed depending on the location in the dried film. The dendritic long rods and sword-like rods were assigned to the crystals of double-stranded and/or triple-stranded helices of the G:C and 2G:C complexes. Cross-like drying patterns that originated from the salt-polymer interaction are also observed. The relationship between the polymer complexation of KPolyG + KPolyC systems and the drying patterns is similar to that of KPolyA (potassium salt of poly(adenylic acid)) + KPolyU (potassium salt of poly(uridylic acid)).     

Cationic gel crystals and amorphous solids of lightly cross-linked poly(2-vinylpyridine) spheres in the deionized aqueous suspension

Colloidal crystallization and amorphous solidification of deionized suspensions of the polydispersed cationic gel spheres of lightly cross-linked poly(2-vinylpyridine), CAIBA-P2VP (107～113 nm in diameter, ±19～22 nm in dispersity), have been studied from the reflection spectroscopy, morphology, phase diagram, and elastic property. Crystallization takes place even for the polydispersed cationic gel spheres by the significant contribution of the extended electrical double layers formed around the spheres. Critical concentrations of melting coexisted with ion exchange resins were around 0.02 in volume fraction and high compared with those of other cationic and anionic gel crystals examined hitherto. The densities (ρ) of CAIBA-P2VP in suspension state, i.e., weight percent of the gel spheres divided by the corresponding volume percent, was around 0.3. The ρ values decreased sharply with decreasing size of P2VP gel spheres, which supports the small gel spheres containing much water inside and being softer than the large ones. The closest intersphere distances of the crystals and/or amorphous solids were much longer than the hydrodynamic diameters of the gel spheres especially at low sphere concentrations. Fluctuation parameters (b) evaluated from the rigidities of CAIBA-P2VP (0.15～0.28) were large compared with those of gel crystals of large-sized P2VP-based cationic gel spheres, anionic thermosensitive gel spheres of poly(N-isopropylacrylamide) (0.05～0.09) and further much larger than those of typical colloidal hard spheres (around 0.03). The dispersity in sphere size played an important role for distinguishing crystal and amorphous solid. Importance of the extended electrical double layers around the cationic gel spheres is supported in addition to the excluded volume effect of the sphere themselves on the crystallization and/or solidification.     

Ultrafast Encapsulation of Metal Nanoclusters into MFI Zeolite in the Course of Its Crystallization: Catalytic Application for Propane Dehydrogenation

Encapsulating metal nanoclusters into zeolites combines the superior catalytic activity of the nanoclusters with high stability and unique shape selectivity of the crystalline microporous materials. The preparation of such bifunctional catalysts, however, is often restricted by the mismatching in time scale between the fast formation of nanoclusters and the slow crystallization of zeolites. We herein demonstrate a novel strategy to overcome the mismatching issue, in which the crystallization of zeolites is expedited so as to synchronize it with the rapid formation of nanoclusters. The concept was demonstrated by confining Pt and Sn nanoclusters into a ZSM-5 (MFI) zeolite in the course of its crystallization, leading to an ultrafast, in situ encapsulation within just 5 min. The Pt/Sn-ZSM-5 exhibited exceptional activity and selectivity with stability in the dehydrogenation of propane to propene. This method of ultrafast encapsulation opens up a new avenue for designing and synthesizing composite zeolitic materials with structural and compositional complexity.     

9,10‐Diaminoanthracenes Revisited: The Influence of N‐Substituents on Their Electronic States

The electronic and molecular structures of 9,10‐diamino‐substituted anthracenes with different N‐substituents have been re‐examined. In particular, different N‐substituents influence both the electronic and molecular structures of the oxidized species of 9,10‐diaminoanthracenes. The anthrylene moiety of 9,10‐bis(N,N‐di(p‐anisyl)amino)anthracene retains its planarity during the course of two successive one‐electron oxidations, whereas 9,10‐bis(N,N‐dimethylamino)anthracene and 9,10‐bis(N‐p‐anisyl‐N‐methylamino)anthracene undergo a substantial structural change to a butterfly‐like structure through a two‐electron oxidation process. The structural changes observed for the oxidized states are ascribed to significant differences in the frontier molecular orbitals of the above‐mentioned three kinds of 9,10‐diaminoanthracenes due to different extents of mixing between the amine‐localized and anthrylene‐localized orbitals.