Production of submicron-sized multihollow polymer particles by alkali/cooling method

Submicron-sized styrene-methacrylic acid copolymer particles, which were produced by emulsion copolymerization, were changed to those having multihollow structure by treating stepwise the emulsion as follows. First alkali treatment was carried out at higher temperature than the glass transition temperature and subsequently the emulsion was cooled by keeping it at room temperature. This was named alkali/cooling method. The effects of methacrylic acid content, pH, time and temperature in the alkali treatment on the formation of multihollow structure were clarified.Part CLV of the series Studies on suspension and emulsion     

Melting temperature of colloidal crystals of monodisperse silica spheres in ethanol-water and ethylene glycol-water mixtures

The melting temperature (T _m) of colloidal crystals of monodisperse silica spheres in ethanol-water and ethylene glycol-water suspensions has been measured by reflection spectroscopy. A sphere of 110 nm in diameter and 0.041 in monodispersity index is used after purification and deionization processes. Transformation from the body-centered cubic lattice to the face-centered cubic lattice subphases is observed as the suspension temperature rises, which is similar to the purely aqueous suspension of the same sphere. A phase diagram including liquid-like and crystal-like structures is obtained in the presence of ion-exchange resins coexisted. The data ofT _m are analyzed successfully with the theory of Williams, Crandall, and Wojtowicz. The heat of melting decreases by the addition of ethanol or ethylene glycol in the mixtures.     

XPS analysis (ESCA) of the surface composition of poly(styrene/2-hydroxyethyl methacrylate) microspheres produced by emulsifier-free emulsion polymerization

Polymer microspheres composed of various compositions of styrene and 2-hydroxyethyl methacrylate (HEMA) were produced by batch emulsifier-free emulsion polymerization. The HEMA content at the surface, [HEMA] _s , of the microspheres powdered by freeze-drying was determined by both quantitativeC ^1s /O ^1s analysis andC ^1s peak shape analysis of the x-ray photoelectron spectroscopic spectra. When the HEMA content in the microsphere, [HEMA] _p , was less than about 5 mole%, the [HEMA] _s values determined by the two different methods showed good agreement. At [HEMA]_p above 5 mole %, [HEMA]_s values determined by the first method were about 15 mole % greater than those determined by the second. They both showed a similar tendency with the [HEMA] _s being higher than the [HEMA] _p , e.g., when [HEMA] _p was 1 mole %, [HEMA] _s was 11 mole %. The intensity of the satellite peak due to the ^* transition of the benzene ring of the styrene component decreased with an increase in [HEMA] _p , to zero at 5 mole % of [HEMA] _p . These results indicate that the HEMA component is localized at the surface.Part CVIII of the series Studies on Suspension and Emulsion.     

Midgap levels of photoexcited conductive polymers. I. A simple description of the midgap levels based on molecular orbital interaction

We studied the midgap levels appearing in the photoexcited conductive polymers such as trans- and cis-polyacetylenes, poly(p-phenylene), polypyrrole, and polyacene based on the molecular orbital analysis. The midgap levels are constructed from the transformation of the highest occupied molecular orbital and the lowest unoccupied molecular orbital of the ground state. As the result of the localization of the wave functions associated with these midgap levels, large polarization is induced between adjacent carbon atoms. Based on the examination of the energy gap between the two midgap levels, the polymers with a nondegenerate ground state such as cis-polyacetylene, poly(p-phenylene), and polypyrrole would show no sizable photoconductivities.     

Complex formation of poly(4-vinyl-N-alkylpyridinium) salts or polymer containing flavin mononucleotide with indole derivatives

A charge-transfer-type complex formation between poly(4-vinyl-N-propylpyridinium bromide) (C3PVP), poly(4-vinyl-N-butylpyridinium bromide) (C4PVP) or poly(4-vinyl-N-benzylpyridinium chloride) (BzPVP), and indole derivatives or between polymer containing flavin mononucleotide residues and indole derivatives was studied in the presence of simple and polyelectrolytes. The association constant (K) of the complex formation with indole acetate increased in the order BzPVP > C4PVP > C3PVP, which indicated an important contribution by hydrophobic interaction. The addition of simple and polyelectrolytes decreased the association constants. This was explained by the “secondary salt effect” of the salts. The importance of the electrostatic interactions in the complexation systems was obvious. The influence of simple electrolytes on the K values was discussed theoretically according to Manning's theory.     

Photophysical properties of porphyrin tapes

The novel fused Zn(II)porphyrin arrays (Tn, porphyrin tapes) in which the porphyrin macrocycles are triply linked at meso-meso, beta-beta, beta-beta positions have been investigated by steady-state and time-resolved spectroscopic measurements along with theoretical MO calculations. The absorption spectra of the porphyrin tapes show a systematic downshift to the IR region as the number of porphyrin pigments increases in the arrays. The fused porphyrin arrays exhibit a rapid formation of the lowest excited states (for T2, approximately 500 fs) via fast internal conversion processes upon photoexcitation at 400 nm (Soret bands), which is much faster than the internal conversion process of approximately 1.2 ps observed for a monomeric Zn(II)porphyrin. The relaxation dynamics of the lowest excited states of the porphyrin tapes were accelerated from approximately 4.5 ps for the T2 dimer to approximately 0.3 ps for the T6 hexamer as the number of porphyrin units increases, being explained well by the energy gap law. The overall photophysical properties of the porphyrin tapes were observed to be in a sharp contrast to those of the orthogonal porphyrin arrays. The PPP-SCI calculated charge-transfer probability indicates that the lowest excited state of the porphyrin tapes (Tn) resembles a Wannier-type exciton closely, whereas the lowest excited state of the directly linked porphyrin arrays can be considered as a Frenkel-type exciton. Conclusively, these unique photophysical properties of the porphyrin tapes have aroused much interest in the fundamental photophysics of large flat organic molecules as well as in the possible applications as electric wires, IR sensors, and nonlinear optical materials.     

Amorphous solid-like distribution of polydisperse particles of colloidal clay and microcrystalline cellulose in deionized suspension

A metallurgical microscope is used to directly observe the amorphous solid-like structures of deionized suspensions of highly polydispersed colloids in sedimentation equilibrium. The colloids used are colloidal clay of bentonite and microcrystalline cellulose (MCC). The two-dimensional distance distribution functions of the amorphous solid-like structures at relatively diluted and concentrated suspensions resemble those of the liquid-like and gas-like structures of monodispersed spheres, respectively. The center-to-center interparticle distances (D) in the amorphous solid-like structures are explained by the effective hard-sphere model; a colloidal particle is coated with electrical double layers. The maximum length of the width of the double layers (Debye length,D ₁) observed is ca. 1n at very dilute suspensions.D andD ₁ continue to decrease as the initial concentration of the particles increases, and from these data rigidities are estimated to be 0.12 and 0.09 Pa for bentonite and MCC suspensions, respectively. The log [viscosity] of bentonite suspensions begins to increase linearly as log [shear rate] decreases with a slope close to –1, which supports the solid-like nature of the suspensions. These experimental results show that electrostatic interparticle repulsion and the elongated Debye-screening length around the particles are both essential for the appearance of the amorphous solid-like structures.     

Dissipative structures formed in the course of drying the colloidal crystals of silica spheres on a cover glass

Macroscopic and microscopic dissipative structural patterns formed in the course of drying the deionized aqueous colloidal crystal suspensions of silica spheres (diameter: 103 nm) on a cover glass have been observed. Spoke-like and ring-like patterns are formed in the macroscopic scale; the former is the crack in the sphere film and the latter is the hill accumulated with spheres formed around the outside edge. The neighbored inter-spoke angle, thickness of the film, and other morphological parameters have been discussed as a function of sphere concentration, concentration of sodium chloride, and the inclined angle of the cover glass. Fractal patterns of the mud cracks are observed in the microscopic scale. Capillary forces between spheres at the air-liquid surface and the relative rates between the water flow at the drying front and the convection flow of spheres are important for the pattern formation. Electronic Publication     

Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

Encapsulation of doxorubicin into liposomes by a freeze-thawing method using buffer solution

When doxorubicin was encapsulated into liposomes by freeze-thawing, the percentage of encapsulated doxorubicin (EN%) was found to vary according to the type of buffer solution used. The reason for this was investigated in the present report. Drug-free liposomes prepared by hydration were mixed with doxorubicin dissolved in a certain type of buffer solution that shows a pH decrease on freezing, and this mixture was subjected to freeze-thawing. Doxorubicin was encapsulated by the liposomes due to the difference in pH between freezing and thawing. EN% depended on the pH of the buffer solution before freezing and increased significantly at over pH 7. About 60% of doxorubicin was encapsulated into liposomes after the Ist freeze-thawing cycle, and EN% was increased gradually with the number of freeze-thawing cycles. The addition of sugar to the experimental system was seen to affect doxorubicin encapsulation and the particle size of liposomes.