Phase Transfer Promoted Ruthenium Oxide Oxidations of Carbohydrates II

ABSTRACT

The use of a phase transfer catalyst, benzyltriethylammonium chloride (BTEAC), is described in conjunction with the ruthenium dioxide/periodate : water/chloroform system for the oxidation of carbohydrate alcohols to the corresponding ketone, aldehyde, or carboxylic acid. The method was found to be applicable to carbohydrates appropriately protected as acetals, ethers, or containing a benzoyloxy group not positioned to readily undergo β-elimination. While the method was very suitable for the oxidation of carbohydrate secondary alcohols to ketones, it was found to be less suitable for the oxidation of a carbohydrate primary alcohol to the corresponding aldehyde or carboxylic acid. Evidence presented suggests that under the mildly basic conditions of the reaction, ruthenium tetraoxide is converted to ruthenate and perruthenate ions in the aqueous solution and then the perruthenate ion is carried by the phase transfer catalyst into the organic layer where oxidation of the substrate occurs. A number of examples illustrating the scope of the method are presented.     

Magnetic-field effects on the size of vortices below the surface of NbSe2 detected using low energy beta-NMR

A low energy radioactive beam of polarized 8Li has been used to observe the vortex lattice near the surface of superconducting NbSe2. The inhomogeneous magnetic-field distribution associated with the vortex lattice was measured using depth-resolved beta-detected NMR. Below Tc, one observes the characteristic line shape for a triangular vortex lattice which depends on the magnetic penetration depth and vortex core radius. The size of the vortex core varies strongly with the magnetic field. In particular, in a low field of 10.8 mT, the core radius is much larger than the coherence length. The possible origin of these giant vortices is discussed.     

The Assembly‐Disassembly‐Organization‐Reassembly Mechanism for 3D‐2D‐3D Transformation of Germanosilicate IWW Zeolite

Hydrolysis of germanosilicate zeolites with the IWW structure shows two different outcomes depending on the composition of the starting materials. Ge‐rich IWW (Si/Ge=3.1) is disassembled into a layered material (IPC‐5P), which can be reassembled into an almost pure silica IWW on treatment with diethoxydimethylsilane. Ge‐poor IWW (Si/Ge=6.4) is not completely disassembled on hydrolysis, but retains some 3D connectivity. This structure can be reassembled into IWW by incorporation of Al to fill the defects left when the Ge is removed.     

Zeolites with Continuously Tuneable Porosity

Zeolites are important materials whose utility in industry depends on the nature of their porous structure. Control over microporosity is therefore a vitally important target. Unfortunately, traditional methods for controlling porosity, in particular the use of organic structure‐directing agents, are relatively coarse and provide almost no opportunity to tune the porosity as required. Here we show how zeolites with a continuously tuneable surface area and micropore volume over a wide range can be prepared. This means that a particular surface area or micropore volume can be precisely tuned. The range of porosity we can target covers the whole range of useful zeolite porosity: from small pores consisting of 8‐rings all the way to extra‐large pores consisting of 14‐rings.     

Effects of Heterogeneous Fracture Aperture on Multiphase Production from Shale Reservoirs

Production simulation from fractured shale reservoirs is often performed by simplifying the hydraulic fractures as rectangular planes with homogeneous aperture. This study investigates the effects of heterogeneous fracture aperture and proppant distribution in realistic, non-rectangular fractures on the multi-phase production from shales. The heterogeneous hydraulic fractures are generated with the GEOS multiphysics simulator under realistic 3D stress field. These fractures are embedded into the TOUGH+ multi-phase flow simulator for production simulation. The results emphasize the importance of flow barriers within the hydraulic fractures, due both to low-aperture regions caused by the stress-shadow effect and the settling of proppant. The production rate is particularly sensitive to aperture heterogeneity if the flow barriers are close to the wellbore such that a great portion of fracture volume is isolated from the well. A stage-to-stage comparison reveals that production from different stages could vary significantly because the local stress field leads to different fracture area and aperture. The use of proppant prevents fracture closure, but if the propped regions are far from the well, they do not enhance production because flow barriers between these regions and the well act as bottlenecks. The present study highlights the importance of incorporating aperture heterogeneity into production simulation, provides insights on the relationship between flow barriers, proppant concentration, and well production, and proposes a practical method to mitigate numerical difficulties when modeling heterogeneous fractures.

     

Controlled Synthesis of Large Single Crystals of Metal-Organic Framework CPO-27-Ni Prepared by a Modulation Approach: In situ Single-Crystal X-ray Diffraction Studies

The size of single crystals of the metal-organic framework CPO-27-Ni was incrementally increased through a series of modulated syntheses. A novel linker modulated synthesis using 2,5-dihydroxyterephthalic acid and the isomeric ligand 4,6-dihydroxyisophthalic acid yielded large single crystals of CPO-27-Ni (∼70 μm). All materials were shown to have high crystallinity and phase purity through powder X-ray diffraction, electron microscopy methods, thermogravimetry, and compositional analysis. For the first time single-crystal structure analyses were carried out on CPO-27-Ni. High BET surface areas and nitric oxide (NO) release efficiencies were recorded for all materials. Large single crystals of CPO-27-Ni showed a prolonged NO release and proved suitable for in situ single-crystal diffraction experiments to follow the NO adsorption. An efficient activation protocol was developed, leading to a dehydrated structure after just 4 h, which subsequently was NO-loaded, leading to a first NO loaded single-crystal structural model of CPO-27-Ni.     

Rapid initiation of reactions in Al/Ni multilayers with nanoscale layering

Research into nanoenergetic materials is enabling new capabilities for controlling exothermic reaction rates and energy output, as well as new methods for integrating these materials with conventional electronics fabrication techniques. Many reactions produce primarily heat, and in some cases it is desirable to increase the rate of heat release beyond what is typically observed. Here we investigate the Al-Ni intermetallic reaction, which normally propagates across films or foils at rates lower than 10 m/s. However, models and experiments indicate that local heating rates can be very high (10⁷ K/s), and uniform heating of such a multilayer film can lead to a rapid, thermally explosive type of reaction. With the hopes of using a device to transduce electrical energy to kinetic energy of a flyer plate in the timescale of 100's of nanoseconds, we have incorporated a Ni/Al nanolayer film that locally heats upon application of a large electrical current. We observed flyer plate velocities in the 2-6 km/s range, corresponding to 4-36 kJ/g in terms of specific kinetic energy. Several samples containing Ni/Al films with different bilayer thicknesses were tested, and many produced additional kinetic energy in the 1.1-2.3 kJ/g range, as would be expected from the Ni-Al intermetallic reaction. These results provide evidence that nanoscale Ni/Al layers reacted in the timescale necessary to contribute to device output.     

Selective preparation of (E)-3-oxo-1-alkenylphosphonates by insertion of acyl chlorides and nitriles into zirconacycles

Zirconacycles 1, obtained from diethyl 1-alkynylphosphonates, insert either acyl chlorides or nitriles to provide, after acidic workup, (E)-3-oxo-1-alkenylphosphonates, 2, in isolated yields of 55-83%. Insertion produces only one regio- and stereoisomer. The reaction is quite general and proceeds well with both aliphatic and aromatic acyl chlorides. Acetonitrile and p-methoxybenzonitrile also inserted efficiently. Insertion of isobutyl chloroformate produced the vinylphosphonocarboxylate, 2c, the first representative of this class of compounds.