Analysis of polyaddition levels in i-Sc3NC80

Using the density functional method, the stabilities of highly hydrogenated and fluorinated [80]fullerenes, both empty and containing the Sc3N molecule, have been calculated. Addition of 44 atoms to i-Sc3NC80 is predicted to be most favorable due to the formation of six octahedrally located benzenoid rings, while addition of up to 52 atoms (consistent with preliminary fluorination data) gives a structure stabilized by the presence of four benzenoid rings. The most stable isomers at this addition level have been determined and the relative stabilities of a number of C80H52, C80F52, and i-Sc3NC80H52 species calculated. The hydrogenation of the i-Sc3NC80 has been computed to be more difficult than the corresponding partner, C80. From the geometrical point of view, the Sc3N molecule is planar in the parent [80]fullerene but is calculated to be pyramidal in some of the hydrogenated/fluorinated derivatives. Moreover, in these it has fixed locations due to orbital interactions arising from deformation of the cage and the presence of localized double bonds.     

Synthesis of microcin SF608

The first total synthesis of aquatic peptide microcin SF608 is described. Coupling of L-Hpla with the dipeptide L-Phe-L-Choi followed by coupling with agmatine and a deprotection step gave microcin SF608. In addition, the levorotatory character of L-Hpla (5) was thoroughly established, and the conformational analysis of L-Choi containing peptides 1 and 8-10 was performed using NMR spectroscopy to examine the cis-trans isomer equilibrium of the L-Phe-L-Choi amide bond.     

Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

The breakdown of the minimum polarizability principle in vibrational motions as an indicator of the most aromatic center

The vibrational motions that disobey the minimum polarizability principle (MPP) in pi-conjugated molecules are distortions of the equilibrium geometry that produce a reduction in the polarizability due to the localization of pi electrons. For aromatic species, this electronic localization is responsible for the subsequent reduction in the aromaticity of the system. In the present work, we diagonalize the Hessian matrix of the polarizability with respect to the vibrational nontotally symmetric normal coordinates, to calculate the nontotally symmetric distortions that produce the maximum breakdown of the MPP in a series of twenty polycyclic aromatic hydrocarbons. It is shown that the nuclear displacements that break the MPP have larger components in those rings that possess the highest local aromaticity. Thus, these vibrational motions can be used as an indicator of local aromaticity.     

A common method for the determination of several calcium channel blockers using an HPLC system with ultraviolet detection

We report a common HPLC method for the single or simultaneous determination of four calcium channel blockers (CCB), namely diltiazem (DTZ), verapamil (VER), nifedipine (NIF) and nitrendipine (NIT) and their active metabolites demetildiltiazem and deacetildiltiazem (MA and M1), norverapamil (NOR), and dehydronifedipine (DHN). DHN was first synthesised in our laboratory and different pH values of the mobil phase were subsequently prepared and tested for chromatographic separation. The detection system and the environmental light conditions were optimised. The best separations of all analytes were obtained using a C₁₈ column and a mobile phase of methanol, 0.04 M ammonium acetate, acetonitrile and triethylamine (2:2:1:0.04 v/v). Quantitation was performed using imipramine (IMI) as the internal standard. For DTZ and its metabolites (M1 and MA), the wavelength chosen was 237 nm; for VER and its metabolite NOR, it was 210 nm; and, finally for NIF and its metabolite DHN and NIT it was 216 nm. When a simultaneous analysis was carried out the wavelength was of 230 nm. The optimum pH were 7.90 and 7.10 when the separation of NIT and DTZ or VER and NIF were carried out, respectively, and 7.90 when a simultaneous separation was carried out. The detection limit of the assay was less than 8 ng ml⁻¹ for all compounds, with coefficients of variation less than 7% (for inter- and intra-day) over the concentration range of 1–1000 ng ml⁻¹. The retention times were less than 11 min. When NIF or NIT were studied, it was necessary to use a sodium vapour lamp in order to avoid the photodegradation which takes place under daylight conditions.     

Therapeutic monitoring of imipramine and desipramine by micellar liquid chromatography with direct injection and electrochemical detection

A micellar liquid chromatographic (MLC) procedure was developed for the clinical monitoring of imipramine and its active metabolite, desipramine. The determination of these highly hydrophobic substances was carried out after direct injection of the serum samples using a mobile phase composed of 0.15 m SDS--6% (v/v) pentanol buffered at pH 7, pumped at 1.5 mL/min into a C(18) column (250 x 4.6 mm), and electrochemical detection at 650 mV. Using this MLC method, calibration was linear (r > 0.995) and the limits of detection (ng/mL) were 0.34 and 0.24 for imipramine and desipramine, respectively. Repeatabilities and intermediate precision were tested at three different concentrations in the calibration range and a CV (%) below 2.2 was obtained. In this MLC procedure, the serum is determined without treatment, thus allowing repeated serial injections without changes in retention factors, and reducing the time and consumables required to carry out the pretreatment process. The assay method can be applied to the routine determination of serum imipramine and its metabolite in therapeutic drug monitoring.     

Interaction of antimicrobial arginine-based cationic surfactants with liposomes and lipid monolayers

The present work examines the relationship between the antimicrobial activity of novel arginine-based cationic surfactants and the physicochemical process involved in the perturbation of the cell membrane. To this end, the interaction of these surfactants with two biomembrane models, namely, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) multilamellar lipid vesicles (MLVs) and monolayers of DPPC, 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] sodium salt (DPPG), and Escherichia coli total lipid extract, was investigated. For the sake of comparison, this study included two commercial antimicrobial agents, hexadecyltrimethylammonium bromide and chlorhexidine dihydrochloride. Changes in the thermotropic phase transition parameters of DPPC MLVs in the presence of the compounds were studied by differential scanning calorimetry analysis. The results show that variations in both the transition temperature (Tm) and the transition width at half-height of the heat absorption peak (deltaT1/2) were consistent with the antimicrobial activity of the compounds. Penetration kinetics and compression isotherm studies performed with DPPC, DPPG, and E. coli total lipid extract monolayers indicated that both steric hindrance effects and electrostatic forces explained the antimicrobial agent-lipid interaction. Overall, in DPPC monolayers single-chain surfactants had the highest penetration capacity, whereas gemini surfactants were the most active in DPPG systems. The compression isotherms showed an expansion of the monolayers compared with that of pure lipids, indicating an insertion of the compounds into the lipid molecules. Owing to their cationic character, they are incorporated better into the negatively charged DPPG than into zwitterionic DPPC lipid monolayers.     

Electronic Structure of Rh(2)(&mgr;-CO)(CO)(2)(H(2)PCH(2)PH(2))(2). An Example of a Non-A-Frame Structure

Calculations based on density functional theory (DFT) and Hartree-Fock configuration interaction (HF-CI) methodology have been carried out to investigate the rhodium-rhodium coupling in Rh(2)(CO)(2)(dppm)(2), 1 (dppm = Ph(2)PCH(2)PPh(2)) and in Rh(2)(&mgr;-CO)(CO)(2)(dppm)(2), 2. DFT geometries, obtained with the Dgauss program, are in good agreement with those determined from X-ray, but HF geometries, calculated using the same basis sets, yield bond distances systematically too long. Calculations indicate that the rhodium atoms in 1 are linked by a single bond. The insertion of a semibridging carbonyl between the two metal atoms leads to a shortening of the rhodium-rhodium distance and also to a noticeable weakening of the metal-metal interaction. Both effects, and also the stabilization of the HOMO of 2, are related to an observed change from square planar to tetrahedral of the ligand environment of the Rh atom proximal to the inserted CO. Both MO analysis and bond characterization from the topology of the charge density confirm the existence of a bonding interaction between the semibridging carbonyl and the distal rhodium atom. The electronic structures of the dicationic complex [Rh(2)(CO)(3)(dppm)(2)](2+) and of the A-frame-like, isoelectronic system Rh(2)Br(2)(&mgr;-CO) (dppm)(2) are also discussed. The electron deformation density is derived from 2 by means of several methodological approaches, namely, HF, HF-CI, DFT, and DFT + gradient corrections. The HF deformation density obtained in the plane containing the metals and the three CO ligands is discussed, as well as the "correlation density" obtained from the difference maps DFT - HF and CI - HF.     

On the automatic restricted-step rational-function-optimization method

The rational function optimization algorithm is one of the widely used methods to search stationary points on surfaces. However, one of the drawbacks of this method is the step reduction procedure to deal with the overstepping problem. We present and comment on a method such that the step obtained from the solution of the rational function equations possesses the desired correct length. The analysis and discussion of the method is mainly centered on the location and optimization of transition states. Received: 18 June 1998 / Accepted: 17 September 1998 / Published online: 23 November 1998