Evaluation of ammonium fluoride for quantitative microwave-assisted extraction of silicon and boron from different solid samples

A novel, simple, efficient and environmentally friendly closed-microwave-assisted extraction (MAE) method of silicon and boron from a variety of industrial and environmental samples using ammonium fluoride as an extractant was developed. This method avoids handling the corrosive and toxic HF and prevents the potential risk of analyte loss due to the creation of volatile SiF₄ and BF₃ in the presence of HF. Atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry were employed for the subsequent analysis of the resulting supernatant for determination of Si and B, respectively. Certified reference material BCR^®-032 Natural Moroccan Phosphate Rock (phosphate fertiliser) was taken to optimise the extraction parameters such as the sample amount, extraction temperature and time and the volume of the extractant. The optimum extraction parameters evaluated using a fractional factorial design were as follows: 50 mg of the sample extracted with 5 mL of 100 g L^?1 NH₄ F for 15 min at 180°C. The optimised MAE procedure was successfully applied to nine different matrix reference materials intended primarily for validation of methods for determination of components in fertilisers, sludge, plants and fly ash. The obtained results were in a good agreement with the certified or comparative values with an overall precision better than 10% in all cases. The proposed method is recommended for fast and reliable preparation of samples with silicon content <8.2% (w/w). However, further decreasing the sample mass to 10 mg enabled the quantitative extraction of silicon from fly ashes at levels of 23% (w/w).     

Physicochemical aspects of <Emphasis Type="Italic">Trichosporon cutaneum</Emphasis> CCY 30-5-10 adhesion and biofilm formation potential on cellophane

This paper focuses on the adhesion and biofilm formation potential of cellulolytic yeast Trichosporon cutaneum CCY 30-5-10 on solid cellophane from a novel perspective. First, physicochemical characterisation of the cells and carrier (cellophane) was performed to evaluate the effect of different culture media (complex vs mineral) on yeast cell adhesion. (Un)favourable adhesion conditions were predicted using the thermodynamic approach. Next, the ability of the cells to colonise the carrier under the above conditions was quantified and the biofilm structure was characterised using image analysis. The approaches described were found suitable to predict and experimentally verify favourable (cell-solid) adhesion, i.e. the hydrophobic and low electron-donor nature of cellophane together with hydrophobic cells (obtained when cultivated in a complex culture medium) were found to have a major impact in defining successful yeast adhesion with subsequent biofilm formation.     

The Phototoxic Potential of the Flavonoids,Taxifolin and Quercetin

Quercetin, one of the most abundant polyphenols in the plant kingdom has been shown to be photodegraded on exposure to UV light. Despite the fact, it is a component of several dermatological preparations. Its phototoxic potential has not been evaluated to date. The aim of this study was to assess whether photo‐induced degradation of quercetin is linked to phototoxic effects on living cells. Its dihydro derivative, taxifolin, was included in the study. For evaluation, the 3T3 Neutral Red Uptake Phototoxicity Test according to OECD TG 432 was used. To better approximate human skin, HaCaT keratinocytes, normal human epidermal keratinocytes and dermal fibroblasts were used, apart from the Balb/c 3T3 cell line. Quercetin showed a dose‐dependent photodegradation in aqueous and organic environments and a phototoxic effect on all used cells. Quercetin pretreatment and following UVA exposure resulted in increased reactive oxygen species production and intracellular glutathione level depletion in human dermal fibroblasts. Taxifolin was found completely nonphototoxic and photostable. As only in vitro methodology was used, further studies using 3D skin models and/or human volunteers are needed to confirm whether exposure to sunlight, tanning sunbeds and/or phototherapy in people using cosmetics containing quercetin is a health risk.     

SDDP for multistage stochastic programs: preprocessing via scenario reduction

Even with recent enhancements, computation times for large-scale multistage problems with risk-averse objective functions can be very long. Therefore, preprocessing via scenario reduction could be considered as a way to significantly improve the overall performance. Stage-wise backward reduction of single scenarios applied to a fixed branching structure of the tree is a promising tool for efficient algorithms like stochastic dual dynamic programming. We provide computational results which show an acceptable precision of the results for the reduced problem and a substantial decrease of the total computation time.     

Solid-state synthesis of undoped and Sr-doped K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>NbO<Subscript>3</Subscript>

The solid-state synthesis of undoped K_0.5Na_0.5NbO₃ (KNN) and KNN doped with 1, 2 and 6 mol% Sr, from potassium, sodium and strontium carbonates with niobium pentoxide, was studied using thermal analysis and in situ high-temperature X-ray diffraction (HT-XRD). The thermogravimetry and the differential thermal analyses with evolved-gas analyses showed that the carbonates, which were previously reacted with the moisture in the air to form hydrogen carbonates, partly decomposed when heated to 200 °C. In the temperature interval where the reaction was observed, i.e., between 200 and 750 °C, all the samples exhibited the main mass loss in two steps. The first step starts at around 400 °C and finishes at 540 °C, and the second step has an onset at 540 °C and finishes with the end of the reaction between 630 and 675 °C, depending on the particle size distribution of the Nb₂O₅ precursor. According to the HT-XRD analysis, the perovskite phase is formed at 450 °C for all the samples, regardless of the Sr content. The formation of a polyniobate phase with a tetragonal tungsten bronze structure was detected by HT-XRD in the KNN with the largest amount of Sr dopant, i.e., 6 mol% of Sr, at 600 °C.     

Methyl 5-Deoxy-α and β-D-Xylofuranosides

Abstract

Synthesized from D-xylose, methyl 5-deoxy-α-D-xylofuranoside (1) and methyl 5-deoxy-β-D-xylofuranoside (2) were obtained in overall yields of 24 and 26 %, respectively. The key step in the synthesis was the separation of an anomeric mixture on a strong anion exchanger in OH^? form. NMR data and mass spectra of title compounds 1, 2, methyl 2,3-di-O-acetyl-5-deoxy-α-D-xylofuranoside (3), and methyl 2,3-di-O-acetyl-5-deoxy-β-D-xylofuranoside (4) are discussed. The conformations of 1 and 2 were established from the best fit between calculated and experimental coupling constants using Karplus equation.     

Zeptomole Detection of Streptavidin Using Carbon Paste Electrode and Square‐Wave Voltammetry

We compared the suitability of avidin and streptavidin for avidin‐biotin technology in view of the sensitivity of the analysis using square‐wave voltammetry. We found out during our preliminary experiments that streptavidin gave approximately 100 times higher electrochemical response in comparison with avidin at the same experimental conditions and concentration. Thus, we used two approaches for streptavidin determination – analysis directly in electrochemical cell and analysis by adsorptive transfer technique (AdTS). Ten minutes long accumulation on carbon paste electrode surface was ascertained as optimal in both cases. Limits of detection were 0.3 aM (electrochemical cell) and 30 aM (AdTS).     

Reversed-phase porous silica rods, an alternative approach to high-performance liquid chromatographic separation using the sequential injection chromatography technique

A commercially available porous silica rod column was used as a separation tool for the sequential injection analysis (SIA). A porous solid monolithic column showed high performance at a low pressure, allowing sequential injection analysis to be used for the first time for separation in HPLC fashion. In this contribution, we tried to demonstrate a new separation concept with SIA manifold for the simultaneous determination of four different compounds (methylparaben (MP), propylparaben (PP), triamcinolone acetonide (TCA) and internal standard ketoprofen (KP)) in a pharmaceutical triamcinolon cream 0.1% formulation. A Chromolith Flash RP-18e, 25 mm x 4.6 mm column with a 10 mm pre-column (Merck, Germany) and a FIAlab 3000 system (USA) with an 8-port selection valve and 10 ml syringe were used for sequential injection chromatographic separations in our study. The mobile phase used was acetonitrile-methanol-water (35:5:65, v/v/v) + 0.05% nonylamine, pH 2.5, flow rate 0.6 ml min(-1). The analysis time was <6 min. A novel sequential injection chromatography (SIC) technique with UV spectrophotometric detection was optimised and validated.     

A novel synthesis of parent resorc[4]arene and its partial alkyl ethers

Treatment of 2,4-diisopropoxybenzyl alcohol with chlorotrimethylsilane in acetonitrile at room temperature for 1 h afforded a novel crystalline resorc[4]arene octaisopropyl ether in 96% yield. Protecting groups were cleaved by boron trichloride in dichloromethane within 30 min and the parent resorc[4]arene was isolated by flash chromatography in 76% yield. The outcome of the deprotection step was dependent on the conditions used as it is exemplified by a preparation of resorc[4]arene heptaisopropyl ether.     

Solubility of Lithium Nitrate in Solutions of Lithium Halides

Summary. Solubility isotherms in LiNO₃ – LiX – H₂O (X = Cl, Br, I) systems at 298.15 K were measured for the first time with special regard to the retrograde solubility of lithium nitrate trihydrate. The compositions of solutions used as media in absorption refrigerators and heat pumps were compared with the results and subsequently discussed.