Determination of carbohydrate-deficient transferrin in human serum by two capillary zone electrophoresis methods and a direct immunoassay: comparison of patient data

Data obtained with two CZE assays for determining carbohydrate-deficient transferrin (CDT) in human serum under routine conditions, the CAPILLARYS CDT and the high-resolution CEofix (HR-CEofix) CDT methods, are in agreement with patient sera that do not exhibit interferences, high trisialo-transferrin (Tf) levels or genetic variants. HR-CEofix CDT levels are somewhat higher compared to those obtained with the CAPILLARYS method and this bias corresponds to the difference of the upper reference values of the two assays. The lower resolution between disialo-Tf and trisialo-Tf observed in the CAPILLARYS system (mean: 1.24) compared to HR-CEofix (mean: 1.74) is believed to be the key for this difference. For critical sera with high trisialo-Tf levels, genetic variants, or certain interferences in the beta-region, the HR-CEofix approach is demonstrated to perform better than CAPILLARYS. However, the determination of CDT with the HR-CEofix method can also be hampered with interferences. Results with disialo-Tf values larger than 3% in the absence of asialo-Tf should be evaluated with immunosubtraction of Tf and possibly also confirmed with another CZE method or by HPLC. Furthermore, data gathered with the N Latex CDT direct immunonephelometric assay suggest that this assay can be used for screening purposes. To reduce the number of false negative results, CDT data above 2.0% should be confirmed using a separation method.     

Monte Carlo Study of Heteroarm Star Copolymers in Good and Selective Solvents

Lattice Monte Carlo simulations of conformations of hereroarm star copolymers A_nB_n in selective solvents were performed using a special variant of the Siepman and Frenkel algorithm. The effects of solvent quality, the number and lengths of blocks on the collapse of the insoluble block A, segregation of the two types of blocks and the behavior of the soluble blocks B were studied mainly for “hairy” stars containing high numbers of long arms. The simulation shows that insoluble blocks collapse in strongly selective solvents and the gravity centers of soluble and insoluble blocks separate which suggests the possibility of the formation of non‐spherical structures.

Snapshots of star a in a very bad solvent (T = 3.00) for blocks A. There are two different views of the star with a total number of arms f = 16 and number of segments N = 300.     

An improved in vivo deuterium labeling method for measuring the biosynthetic rate of cytokinins

An improved method for determining the relative biosynthetic rate of isoprenoid cytokinins has been developed. A set of 11 relevant isoprenoid cytokinins, including zeatin isomers, was separated by ultra performance liquid chromatography in less than 6 min. The iP-type cytokinins were observed to give rise to a previously-unknown fragment at m/z 69; we suggest that the diagnostic (204-69) transition can be used to monitor the biosynthetic rate of isopentenyladenine. Furthermore, we found that by treating the cytokinin nucleotides with alkaline phosphatase prior to analysis, the sensitivity of the detection process could be increased. In addition, derivatization (propionylation) improved the ESI-MS response by increasing the analytes' hydrophobicity. Indeed, the ESI-MS response of propionylated isopentenyladenosine was about 34% higher than that of its underivatized counterpart. Moreover, the response of the derivatized zeatin ribosides was about 75% higher than that of underivatized zeatin ribosides. Finally, we created a web-based calculator (IZOTOP) that facilitates MS/MS data processing and offer it freely to the research community.     

Determination of fluoroquinolone antibiotics in wastewater using ultra high‐performance liquid chromatography with mass spectrometry and fluorescence detection

A new ultra HPLC (UHPLC) method using both MS and fluorescence detection (FD) was developed for the determination of five fluoroquinolones in wastewaters. Systematic method development approach was compared with a conventional one. During the systematic approach, a possibility of automatic switching among four independent analytical columns of different chemistries has been used. Acidic as well as basic pH using ACN and methanol as organic modifiers was tested. The best separation of fluoroquinolones was obtained on phenyl analytical column at pH 10.5, which is a completely novel approach for separation of fluoroquinolones. Further, a new SPE procedure was developed for the sample preparation using basic pH as well. The sensitivity and selectivity of FD and MS detection were compared. FD at basic pH 10.5 demonstrated lower sensitivity than at acidic pH, which is conventionally performed. At basic pH, UHPLC‐MS/MS was found about two orders of magnitude more sensitive than FD. Both methods were validated and subsequently UHPLC‐FD method was used for the evaluation of stability of fluoroquinolones. UHPLC‐MS/MS method was used for the analysis of wastewater samples. Norfloxacin and ciprofloxacin were detected in samples of influent and effluent from wastewater treatment plant. Ofloxacin was detected only in influent from wastewater treatment plant.     

Identification of new phase II metabolites of xanthohumol in rat in vivo biotransformation of hop extracts using high-performance liquid chromatography electrospray ionization tandem mass spectrometry

Polyphenolic compounds occurring in hop extracts and their phases I and II metabolites formed during in vivo rat biotransformation have been analyzed using HPLC/MS/MS with electrospray ionization (ESI). Two main groups of polyphenolics are present in the hops, i.e., xanthohumol related compounds and so called α- and β-bitter acids (humulones and lupulones). In our study, hybrid quadrupole-time-of-flight (QqTOF) analyzer is used for the identification of both natural phenolics and their metabolites due to the possibility of accurate mass measurements in full scan and tandem mass spectra supported by MSⁿ data obtained with the ion trap analyzer. Both ESI polarity modes are used for the determination of molecular weights based on [M+H]⁺ and [M−H]⁻ ions in the full scan spectra and the structural information in subsequent tandem mass spectra. The emphasis is given on the elemental composition determination of individual metabolites based on accurate masses typically better than 5 ppm even with the external calibration. Advanced software tools are used for the metabolite identification using the comparison of the blank chromatogram with the real incubation sample together with the software prediction and detection of possible metabolites. Chromatograms of rat incubations are also compared with chromatograms of pure rat feed, rat feed enriched with hop extracts and the placebo experiment. More than ten compounds originating from the hops are identified in rat feces, two of them belong to phase I metabolites and five compounds are phase II metabolites.     

A new [(1R,2R)‐1,2‐diaminocyclohexane]platinum(II) complex: formation by nitrate–acetonitrile ligand exchange

The title compound, cis‐diacetonitrile[(1R,2R)‐1,2‐diaminocyclohexane‐κ²N,N′]platinum(II) dinitrate monohydrate, [Pt(C₂H₃N)₂(C₆H₁₄N₂)](NO₃)₂·H₂O, is a molecular salt of the diaminocyclohexane–Pt complex cation. There are two formula units in the asymmetric unit. Apart from the two charge‐balancing nitrate anions, one neutral molecule of water is present. The components interact via N—H...O and O—H...O hydrogen bonds, resulting in supramolecular chains. The title compound crystallizes only from acetonitrile with residual water, with the acetonitrile coordinating to the molecule of cis‐[Pt(NO₃)₂(DACH)] (DACH is 1,2‐diaminocyclohexane) and the water forming a monohydrate.     

Control variational method approach to bending and contact problems for Gao beam

This paper deals with a nonlinear beam model which was published by D.Y.Gao in 1996. It is considered either pure bending or a unilateral contact with elastic foundation, where the normal compliance condition is employed. Under additional assumptions on data, higher regularity of solution is proved. It enables us to transform the problem into a control variational problem. For basic types of boundary conditions, suitable transformations of the problem are derived. The control variational problem contains a simple linear state problem and it is solved by the conditioned gradient method. Illustrative numerical examples are introduced in order to compare the Gao beam with the classical Euler-Bernoulli beam.     

Oxidation of Sanguinarine and Its Dihydro‐Derivative at a Pyrolytic Graphite Electrode Using Ex Situ Voltammetry. Study of the Interactions of the Alkaloids with DNA

This study describes the oxidation of sanguinarine (SG) and its metabolite dihydrosanguinarine (DHSG) on the surface of a basal‐plane pyrolytic graphite electrode (PGE). Since both alkaloids strongly adsorb onto the surface of pyrolytic graphite, measurements were performed using ex situ voltammetric methods, adsorptive transfer (AdT) cyclic voltammetry (CV) and square‐wave voltammetry (SWV). Oxidation peaks of SG (peak A) and DHSG (peak A*) were observed around the potential of +0.7 V (vs. Ag/AgCl/3 M KCl), depending on the experimental conditions. The voltammetric peaks A and A* are probably related to the oxidation of N‐methylphenanthridine nitrogenous heterocycle of SG and oxidation of DHSG back to SG, respectively. The electrochemical results and optimized AdT SWV were subsequently applied to the study of the interactions of SG and DHSG with DNA in vitro. Analysis of the alkaloid/DNA interactions was based on observing heights of oxidation peaks A and A* after incubation of SG and/or DHSG with supercoiled (sc) DNA [pBSK_(?)]. Electrochemical study of the interactions was supported and complemented with measurements using gel electrophoresis (Topoisomerase I scDNA relaxation assay) and steady‐state and time‐resolved fluorescence spectroscopy. The results suggest that SG intercalates into the double‐stranded structure of scDNA (the SG/base pair ratio is max. 1/4) while increased binding affinity was observed for quaternary cation (SG⁺). DHSG which, unlike SG⁺, does not possess a strictly planar molecular structure, did not show intercalative DNA binding in any of the three methods applied.     

Conductivity,impurity profile,and cytotoxicity of solvent‐extracted polyaniline

Understanding the correlation between the preparation, purification, impurity leaching, and cytotoxicity of polyaniline is crucial for the application of this conducting polymer in biomedicine. Polyaniline hydrochloride was purified in a Soxhlet extractor by using six different solvents: methanol, 1,2‐dichloroethane, acetone, ethyl acetate, hexane, or 0.2 M aqueous hydrochloric acid. The chromatographic analyses of impurities leached out of the polymer into the solvents confirmed differences in impurity profiles, which depended on the polarity of the extraction solvent. Compared with the original polymer, the conductivity of purified polyanilines increased in dependence on the amount and type of extracted impurities. The cytotoxicity of purified samples determined on the mouse embryonic fibroblast cell line NIH/3T3 using MTT assay improved as well. Methanol and 0.2 M hydrochloric acid were the most efficient solvents capable of extracting low‐molecular‐weight impurities, and thus reducing polyaniline cytotoxicity. The absence of cytotoxicity was observed at an extract concentration of 10%. Extraction with suitable solvents can, therefore, be a possible way of obtaining cyto‐compatible polyaniline with sufficient conductivity. Copyright © 2015 John Wiley & Sons, Ltd.