Modeling the reaction mechanisms for redox regulation of protein tyrosine phosphatase 1B activity

Protein tyrosine phosphatase 1B (PTP1B) functions by removing the phosphoryl group from tyrosinephosphorylated proteins in insulin signaling and metabolism. The regeneration of the active site involves a sulphenylamide intermediate derived from the intrastrand cross-linking between the catalytic serine and the neighboring backbone nitrogen. Two mechanisms have been proposed for the formation of the sulphenylamide intermediate and the subsequent reactivation of the catalytic site. In the current work, the proposed mechanisms have been investigated by the use of density functional theory calculations. Our results suggest that these two mechanisms have similar overall energy barriers and that the preferred route will be determined by the availability of hydrogen peroxide or other oxidizing reagents.     

Water as an Efficient Solvent for Oxygenation Transformations with 34% Hydrogen Peroxide Catalyzed by some Heteropolyoxometalates

Summary. A highly efficient, selective, fast, and cheap protocol is developed for oxidation of aromatic amines and alcohols utilizing 34% hydrogen peroxide in water catalyzed by some W- and Mo-based heteropolyoxometalates. Findings showed that dodecatungstophosphoric acid, H₃PW₁₂O₄₀, was the most efficient catalyst in the examined oxidation reactions. This methodology may prove to be a valuable alternative for eco-friendly green oxidation. Inherent simplicity, easy work up, and using regenerable catalysts were other key aspects of this oxidation protocol.     

Monitoring myoglobin by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of myoglobin in human urine using end-column amperometric detection with a carbon fiber microelectrode at a constant potential of 1.80 V vs. saturated calomel electrode (SCF). The optimum conditions of separation and detection are: 3.73 x 10-4 mol/L sodium diethyl malonyl urea (barbitone sodium), 1.34 x 10-4 mol/L HCl for the buffer solution, 20 kV for separation voltage, 5 kV and 5 s for injection voltage and injection time, respectively. The limit of detection is 4.4 x 10-8 mol/L or 84 amole signal to noise (S/N = 2). The relative standard deviation is 2.9% for the migration time and 2.5% for the electrophoretic peak current. The method can be used for the determination of myoglobin in human urine. The samples can be directly injected and need no pretreatment. The method is also rapid, less than 2 min, and has a recovery rate of 94-106%.     

赖氨酸修饰壳聚糖磁性超微载体的制备和表征

本文设计并合成了良好水溶性的赖氨酸修饰壳聚糖,并对制备工艺进行了优化.产物通过红外(FTIR)和核磁(1H-NMR)进行了表征,并将其作为壳层材料制备了赖氨酸修饰壳聚糖磁性超微载体.通过光电能谱(XPS)、透射(TEM)、激光粒度仪、X射线衍射(XRD)、磁性能测试(VSM)对载体进行了表征.结果表明,制备的赖氨酸修饰壳聚糖磁性超微载体表面带有大量的氨基(-NH2),粒径分布较为均一(100nm左右),形貌较为规则,并具有良好的超顺磁性,因而该载体具有更加良好的性能.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

HPLC–MS Analysis of Isoniazid in Dog Plasma

A simple, rapid, and sensitive liquid chromatography–mass spectrometric (LC–MS) method was developed and validated for the determination of isoniazid in dog plasma. Plasma samples were deproteined with methanol and separated on a C₁₈ column interfaced with a single quadrupole mass spectrometer, using 0.1% formic acid–acetonitrile (91:9 v/v) as mobile phase. Detection was performed by positive electrospray ionization with selected ion monitoring at m/z 138 for isoniazid and 152 for entecavir maleate internal standard. Linearity was obtained over the range of 25–5,000 ng mL^?1, with a lower limit of quantification of 25 ng mL^?1. The intra- and inter-day precision was less than 2.7% in terms of relative standard deviation. Accuracy, expressed as relative error, ranged from ?2.0 to 8.0%. Plasma samples were analysed within 5 min. The method was successfully applied to the evaluation of the pharmacokinetics of isoniazid in dog plasma.     

苯二甲酰基桥联铁硫配合物［（μ－RS）Fe_2（CO）_6］_2（μ－OCC_6

通过由Ｆｅ３（ＣＯ）１２、ＲＳＨ和Ｅｔ３Ｎ所形成的［（μ－ＣＯ）（μ－ＲＳ）Ｆｅ２（ＣＯ）６］Ｅｔ３ＮＨ于室温下分别与对或间苯二甲酰氯的原位反应，首次合成６个结构新颖的苯二甲酰基桥联铁硫配合物［（μ－ＲＳ）·Ｆｅ２（ＣＯ）６］２（μ－ｐ－ＯＣＣ６Ｈ４ＣＯ－ｐ－μ）（Ｒ＝Ｅｔ，ｎ－Ｂｕ，ｔ－Ｂｕ）以及［（μ－ＲＳ）Ｆｅ２（ＣＯ）６］２（μ－ｍ－ＯＣＣ６Ｈ４ＣＯ－ｍ－μ）（Ｒ＝ｎ－Ｐｒ，ｎ－Ｂｕ，ｔ－Ｂｕ）。经元素分析、ＩＲ光谱及１ＨＮＭＲ表征了它们的结构，并讨论了产物的生成过程。此外，还提出了合成对苯二甲酰氯的一种新方法。     

Application of thermal analysis to carbon black-elastomer systems

In this study a relationship between the surface and textural properties of carbon blacks and the gasification process induced thermally in air is noted. A temperature jump method was used to follow the gasification in air and to establish the relevant Arrhenius parameters. This can be associated with the activity of ‘basal’ plane carbon atoms as well as ‘edge’ carbon atoms at the surface. This is based on a model of carbon black structure consisting of the irregular packing of small graphite carbon structures. The carbon black surface was measured using a single measurement of adsorption based essentially on the BET volumetric method. The carbon black surface had a rate of oxidation per unit are which clearly indicated that the lower area carbon blacks had a predominately active area of ‘edge’ atoms at the surface while the surface of the higher area carbon blacks had a predominate amount of ‘basal’ plane graphite carbon atoms.     

Polyarylate–polystyrene block copolymer from macro-azoinitiator: Synthesis and its thermal properties

A macro-azoinitiator containing polyarylate segment and azo group was prepared by the solution polycondensation of azobiscyanopentanoyl chloride and hydroxy-terminated polyarylates having viscosity-average molecular weights of 6200, 8100, and 12 400. These macro-azoinitiators were used in the radical polymerization of styrene to synthesize polyarylate-polystyrene block copolymers. Thermal properties measured by the differential scanning calorimetry indicated the phase separated morphology of the block copolymers except at low molecular weight of the block constituents. © 1993 John Wiley & Sons, Inc.