Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Continuous chemiluminescence determination of formaldehyde in air based on Trautz-Schorigin reaction

A new continuous method for the determination of formaldehyde in air is described. A cylindrical wet effluent diffusion denuder is used for the collection of formaldehyde from air into a thin film of absorption liquid (distilled-deionized water). Formaldehyde in the denuder concentrate is on-line detected employing a chemiluminescence flow method based on a reaction of formaldehyde and gallic acid with hydrogen peroxide in an alkaline solution. The collection efficiency of formaldehyde is quantitative at the air flow rate of 0.5 L min⁻¹ (absorption liquid flow rate of 336 μL min⁻¹). The limit of detection (S/N = 3) is 0.60 μg m⁻³ HCHO (0.49 ppb). The calibration graph is linear up to 300 μg m⁻³ HCHO (244 ppb). The relative standard deviations of chemiluminescence method for 1 × 10⁻⁶ and 5 × 10⁻⁶ M HCHO are 2.87% and 1.49%, respectively. Acetaldehyde interferes negligible, other compounds do not interfere. The method was employed for formaldehyde measurement in ambient air. The comparison measurement illustrates the good agreement of results obtained by proposed method with those obtained by reference fluorimetric method.     

Chain length effect of the counterion on the partial molal volume of alkanesulfonates

The partial molal volumes of two series of homologous surfactants, n-alkylammonium decanesulfonates and a, ?-alkanediammonium nonanesulfonates, were measured below and above their CMC in aqueous solution. Their counterions were n-alkylammonium and a, ?-alkanediammonium. The relationship between the partial molal volume and the chain length of the counterion below the CMC had an inflection point. The relationship between them, above the CMC, was almost linear. In the case of the alkylammonium salts, the values of the volume change of micellization were almost the same when the chain length of the counterions was shorter than the butyl, and increased with an increase in the chain length when it was longer than the propyl. In the case of the alkanediammonium salts, the volume change of micellization showed a small decrease with the chain length when it was shorter than octane, and was very large for the nonane ammonium salt. The large positive increase in the volume change with the increase in the chain length of the counterion can be explained by the hydrophobic interaction between the alkyl chain of the counterion and the hydrophobic core of the micelle.     

反相悬浮聚合法合成超强吸水剂

以两性高分子作悬浮稳定剂，用反相悬浮聚合法合成了聚（丙烯酸盐－丙烯酰胺）类超强吸水剂．研究了交联剂、稳定剂、引发剂等用量、中和程度、单体组成及链转移剂等聚合条件对吸水剂吸水性能的影响．得到了吸蒸馏水１０５０ｍＬ／ｇ及吸０．９％ＮａＣｌ溶液８６ｍＬ／ｇ的超强吸水剂．此外，还比较了含不同反离子的聚丙烯酸类吸水剂的吸水性能     

Radical additions to fluoro-olefins. photochemical mono-fluoroalkylation and sequential bis-fluoroalkylation of oxolane

Oxolane was fluoroalkylated by its photoadditions under atmospheric pressure. Monofluoro-alkylations were carried out with hexafluoropropene (1) and perfluorovinyl ethers C₃F₇O-[CF(CF₃)CF₂O]_n-CF = CF₂ (24, n = 0–2) by direct photoexcitation of the olefins to give high yields of addition products 9–12 (81–94%). The reactions were completely regioselecti ve at the oxolane molecule and almost completely regioselective (93–99%) at the double bond of fluoro-olefins; no bis-fluoroalkylated oxolanes were detected. The completely selective introduction of a second fluoroalkyl into position 5 of the oxolane molecule was accomplished by acetone-sensitised photoaddition of 2fluoroalkylated oxolanes 9,10 to fluoro-olefins 1 and 2. Byproducts from reactions of the dimethylketyl radical which is formed in the initiation step were isolated and have given some evidence about the reaction mechanism that is discussed.     

α-phosphoryl sulfoxides. X. A general synthesis of optically active α-chlorovinyl sulfoxides

A general and efficient synthesis of enantiomeric α-chlorovinyl p-tolyl sulfoxides 1 using (+)-(S)_C(S)_S-α-chloro-α-dimethoxyphosphorylmethyl p-tolyl sulfoxide as a key substrate for the Horner-Wittig reaction with carbonyl compounds is described. The ratio of geometrical isomers of 1 was determined and briefly investigated. The X-ray diffraction structures of (Z)-1-chloro-1-p-tolylsulfinyl-2-phenyl-ethene and (Z)-1-chloro-1-p-tolylsulfinyl-2-(2-thienyl)-ethene are reported.     

Towards a microscopic theory of the modulus of elasticity in crystalline covalent materials and a survey of potential superhard materials

The present report is an account of the generalization of the dynamic elasticity theory earlier proposed by Bucknum et al. and applied to the cubic diamond and tetragonal glitter lattices. It describes a theory of elasticity in which the elasticity moduli are based upon the microscopic constants of the various structure-types. Such microscopic constants include the force constants of the chemical bonds in the unit of pattern of the material, its associated lattice parameters, and the elastic chemical bond deformation parameters of the material. In developing the outward features of the dynamic elasticity model, it is shown that an integral over the force density in the unit cell of a given material; where the force is modeled based upon the elastic deformation forces of the chemical bonds in the unit of pattern of the material, and the volume is written as a function of the deformations taking place inside the unit cell of the material; generates the terms for calculating its modulus of elasticity at pressure, in components, that are directed along the principal axes of the unit cell. Several potential solutions to the problem of superhardness are discussed and illustrated.     

Interactions between synthetic and indigenous naphthenic acids and divalent cations across oil–water interfaces: effects of addition of oil-soluble non-ionic surfactants

Interactions between naphthenic acids and divalent metal cations across model oil–alkaline water interfaces were investigated by correlating changes in dynamic interfacial tension (IFT), to plausible reaction mechanisms. The measurements were carried out by using a CAM 200 optical instrument, which is based on the pendant drop technique. The naphthenic acids used were synthesised model compounds as well as commercial acid mixtures from crude distillation and extracted acid fractions from a North Sea crude oil. The divalent cations involved Ca²⁺, Mg²⁺, Sr²⁺, and Ba²⁺, which are all common in co-produced formation water and naphthenate deposits. The results show that the dynamic IFT strongly depends on naphthenic acid structure, type of divalent cation, and the concentration of the compounds as well as the pH of the aqueous phase. Introducing divalent cations to systems involving saturated naphthenic acids caused mostly a permanent lowering of the IFT. The decline in IFT is due to electrostatic attraction forces across the interface between the cations in the aqueous phase and the carboxylic-groups at the o/w interface, which cause a higher interfacial density of naphthenic acid monomers. The permanent lowering in IFT is likely due to formation of positively charged monoacid complexes, which possess high interfacial activity. On the other hand, in the case of the aromatic model compounds, the cations affected the IFT differently. This is mainly discussed in light of degree of cation hydration and steric conditions. Various oil-soluble non-ionic surfactant mixtures were also introduced to systems involving a model naphthenic acid and Ca²⁺ in order to investigate how the interfacial competition affected the local interactions. Based on the behaviour of dynamic IFT, probable inhibition mechanisms are discussed.Electronic Supplementary Material Supplementary material is available for this article at     

New dimension in nano-imaging: breaking through the diffraction limit with scanning near-field optical microscopy

In recent years scanning near-field optical microscopy (SNOM) has developed into a powerful surface analytical technique for observing specimens with lateral resolution equal to or even better than 100 nm. A large number of applications, from material science to biology, have been reported. In this paper, two different kinds of near-field optical microscopy, aperture and scattering-type SNOM, are reviewed together with recent studies in surface analysis and biology. Here, near-field optical techniques are discussed in comparison with related methods, such as scanning probe and standard optical microscopy, with respect to their specific advantages and fields of application.     

钙钛矿材料组分调控策略及其光电器件性能研究进展

近年来，钙钛矿太阳电池的光电转换效率取得了爆发式增长，这与电池中钙钛矿薄膜的制备工艺和材料组分密切相关.关于钙钛矿薄膜的制备方法，相关的研究报道及综述较多，然而钙钛矿材料组分调控方面的研究梳理工作相对缺乏.本综述总结了近年来不同组分体系钙钛矿材料的研究进展，包括有机无机铅卤钙钛矿、全无机铅卤钙钛矿、少铅钙钛矿以及无铅钙钛矿.重点介绍了不同体系中具有代表性的材料组分及其对器件性能的影响，旨在梳理通过组分调控提高钙钛矿电池的效率及稳定性的研究思路，最终实现商业化应用.