The predictive accuracy for estimating infinite dilution activity coefficients by γ∞-based UNIFAC

The predictive accuracy for estimating infinite dilution activity coefficients by a modification of the UNIFAC method wherein the group interaction parameters were based on only data (referred to as -based UNIFAC) has been studied. Estimates and measured values were compared for six prototypical solutes in a series of homologous n-alkanes, l-alcohols and alkanenitrile solvents. Despite the fact that the interaction parameters were derived using only data, this approach still gave serious errors due to several inherent problems in the original UNIFAC model. Its performance is sometimes even poorer than that of the original UNIFAC method. For example for nitromethane in alcohols and p-dioxane in nitriles values predicted by the -based UNIFAC are essentially zero. The large errors for these systems are most likely due to inaccurate interaction parameters in the -based UNIFAC method.     

Quantitative analyses of shape-selective intercalation of isomeric mixtures of muconates into [LiAl2(OH)6]Cl.yH2O layered double hydroxide

Quantitative investigation of the shape selectivity for the competitive intercalation reaction of isomeric mixtures in the interlayer of LDH was achieved by analyzing the solid phases synthesized by the reaction of [LiAl(2)(OH)(6)]Cl.yH(2)O with various compositional mixtures of (E,E)- and (Z,Z)-muconates. The apparent partition constant K' for the anion-exchange reaction between (E,E)- and (Z,Z)-muconates was quite dependent on the mole fraction of muconates in solution. The only single phase saturated with [LiAl(2)(OH)(6)](2)[(E,E)-C(6)H(4)O(4)].zH(2)O could be obtained in the range of the initial mole fraction of (E,E)-muconate larger than 0.6 in the starting solution, while mixed phases intercalated with (E,E)- and (Z,Z)-muconates could be obtained at lower mole fractions of (E,E)-muconate. The shape selectivity for the competitive reaction of two muconates on the [LiAl(2)(OH)(6)](+) lattice could be ascribed to thermodynamic processes, and the conditions under which that pure (E,E)-muconate was efficiently separated from isomeric mixtures of two muconates were successfully evaluated.     

Cytotoxic Constituents from the Stem Bark of Zanthoxylum Pistaciiflorum

Two new esters, methyl 4‐(prenyloxy)dihydrocinnamate and methyl 4‐(geranyloxy)dihydrocinnamate, together with fourteen known compounds have been isolated from the stem bark of Zanthoxylum pistaciiflorum. The structures of two new compounds were determined through spectral analyses. Among the isolates, four compounds exhibited effective cytotoxicities against P‐388 and HT‐29 cell lines in vitro.     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

Modeling of the Permeate Flux during Microfiltration of BSA-Adsorbed Microspheres in a Stirred Cell

A study on the variation of the permeate flux was performed in a stirred cell charged with microspheres, to investigate the effects of the stirrer speeds (300, 400, and 600 rpm) and the BSA concentration (0.1, 0.2, 0.4, and 0.8 g/L) under constant pressure. The permeate flux increased over time before the saturation point, but it began to decrease after that point. An increase of the BSA concentration and the stirrer speed resulted in the rapid increase of the permeate flux. This is contrary to the observation of the conventional filtration experiments using a stirred cell. A resistance-in-series model was employed for the modeling of the permeate flux. The cake resistance (R(c), induced by the concentration polarization of microspheres) and the fouling resistance (R(f), induced by the adsorption of BSA inside the membrane pore) must be considered simultaneously for the modeling. These modeling results were in good agreement with the experimental data. These can be applied to the special system considering both R(c) and R(f) as well as the general filtration systems using a stirred cell. Copyright 2000 Academic Press.     

Synthesis and Structures of Titanosiloxane Cage Compounds

Reaction of (triphenylmethyl)silanetriol (1) with cyclopentadienyltitanium trichloride (CpTiCl₃) in the presence of triethylamine as a HCl scavenger gave both compounds of a partial open-cage type {[Ph₃CSiO(OH)]₃(Ph₃CSiO_3/2)(CpTiO_3/2)₄} (2) and cube type (Ph₃CSiO_3/2CpTiO_3/2)₄ (3). The 1:1 reaction of 1 and CpTiCl₃ in toluene solvent at reflux temperature for 3 d afforded compounds 2 (22%) and 3 (36%). When 1 is reacted with a 1.5 fold excess of CpTiCl₃ under the same conditions, compound 3 was obtained in high yield (81%) along with 2 in trace quantities. Compounds 2 and 3 were fully characterized by the analyses of ¹H, ¹³C, ²⁹Si NMR, IR, and FAB MS data. The solid-state structure of 3 was determined by a single crystal X-ray diffraction study. Compound 3 had shown to have catalytic activity for the oxidation of alkenes such as 1-octene, cyclooctene, and norbornene with t-butyl hydrogen peroxide. The effect of solvent was observed in this epoxidation reaction. The order of reactivity were decreased as follows: CHCl₃ > hexane THF.     

Electron paramagnetic resonance study of partially oriented clay platelets intercalated with copper(II) 1,4,8,11-tetraazacyclotetradecane

Electron paramagnetic resonance (EPR) spectra of powder and oriented films of montmorillonite, hectorite, and saponite intercalated with [Cu(cyclam)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) exhibit three components: an orientation-dependent component without hyperfine features, an orientation-dependent component with hyperfine features, and an orientation-independent component without hyperfine feature. EPR spectra of [Cu(cyclam)](2+)-saponite, which exhibit only two components and the best resolved hyperfine features, were simulated. The spectra indicate that a large portion of the saponite platelets are inclined to the glass surface, although they tend to align with their basal planes parallel to the glass surface. The orientation-dependent spectra could be simulated by introducing a Gaussian distribution with a standard deviation of 20 degrees for the inclination angle. The standard deviation may be used as a disorder parameter for the microcrystals assembled on glass plates. Spectral simulation also shows that the CuN(4) plane of [Cu(cyclam)](2+) is parallel to the clay layers. EPR spectra of some other partially oriented systems are also discussed.     

Mg2Ru5B4 und Mg5Ru13B11, zwei ternäre Magnesium-Rutheniumboride mit Kanalstrukturen

Mg₂Ru₅B₄ and Mg₅Ru₁₃B₁₁, Two Ternary Magnesium Ruthenium Borides with Channel Structures The ternary borides Mg₂Ru₅B₄ and Mg₅Ru₁₃B₁₁, crystallizing in the orthorhombic space group Pbam, were prepared by reaction of the elementary components in sealed tantalum ampoules. Mg₂Ru₅B₄ (a = 1000.0(2) pm, b = 837,6(1) pm, c = 295.42(3) pm, Z = 2, R_W = 0.027 for 563 reflections) is homeotypic with Sc₂Ru₅B₄. The structure contains BRu₆-trigonal prisms, connected by faces and edges to form pentagonal channels filled with chains of magnesium atoms. Mg₅Ru₁₃B₁₁ (a = 2190.1(2) pm, b = 996.7(2) pm, c = 294.65(3) pm, Z = 2, R_W = 0.031 for 959 reflections) has a similar but so far unknown structure in which parts of the magnesium and boron atoms are disordered.     

Hydroxyl radical is the active species in photochemical DNA strand scission by bis(peroxo)vanadium(V) phenanthroline

Bis(peroxo)vanadium(V) complexes are widely investigated as anticancer agents. They exert their antitumor and cyctotoxic effects through inhibition of tyrosine phosphatases and DNA cleavage, respectively. The latter process remains poorly understood. The mechanism of DNA cleavage by NH(4)[(phen)V(O)(eta(2)-O(2))(2)] (phen = 1,10-phenanthroline) was investigated. Kinetic studies on DNA cleavage revealed that the complex is a single-strand nicking agent with no specificity. EPR experiments using 2,2,6,6-tetramethyl-4-piperidone (TMP) and 5,5'-dimethyl-1-pyrroline-N-oxide (DMPO) as spin-traps for singlet oxygen and hydroxyl radical, respectively, implicated hydroxyl radical production upon photodecomposition of bis(peroxo)vanadium(V). This was corroborated by benzoate inhibition of DNA strand scission and stoichiometric oxidation of 2-propanol to acetone upon irradiation of bis(peroxo)vanadium(V) phenanthroline. High-resolution polyacrylamide gel analysis of the vanadium cleavage reaction and [Fe(II)EDTA](2)(-)/H(2)O(2) resulted in comigration of "ladder" pattern bands, which superimposed when both reactions were run on the same lane. These findings identify hydroxyl radical produced from the photooxidation of the peroxo ligand on vanadium as the active species in DNA cleavage.     

Anatase-Rutile Transition of Precipitated Titanium Oxide with Alcohol Rinsing

The effect of alcohol washing on the anatase-rutile transition of precipitated titanium oxide was investigated using X-ray powder diffraction, Fourier-transform IR spectroscopy, and thermogravimetry. Alcohol (butanol) rinsing accelerated the anatase-rutile transition of precipitated titanium oxide powder so that the onset temperature of transition decreased drastically from 800 degrees C for water-washed powder to 550 degrees C for alcohol-rinsed powder. Alternation of transition kinetics and mechanisms by rinsing media could be confirmed from the analysis of temperature and time dependence of rutile content. The attributability of the chemical state of anatase after crystallization, which contained H(2)O, OH, and organic residues, to the change of transition kinetics with alcohol rinsing will be discussed. Two mechanisms, the effect of residual organics and/or H(2)O(OH), could be suggested on the basis of analysis of the difference between chemical states of water-washed anatase and alcohol-rinsed powder. Copyright 2000 Academic Press.