Chemical Vapor Deposition of Silicon Dioxide by Direct-Current Corona Discharges in Dry Air Containing Octamethylcyclotetrasiloxane Vapor: Measurement of the Deposition Rate

Experiments in a positive-polarity, wire/plate electrode establish the effects of the concentration of octamethylcyclotetrasiloxane (150–1100 ppm) and the operating current (0.5–2.55 μA/cm length of wire) on the rate of deposition of silicon dioxide on the high voltage wire. The wire is 100 μm radius tungsten and the wire-to-plate spacing is 1.5 cm. Analyses of the deposit with X-ray diffraction, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy show that it is amorphous silicon dioxide. The deposition rate increases linearly with increasing silicone concentration and corona current. For the concentrations of silicone likely to present in indoor air, the gas-phase processes limit the rate of deposition.     

ANION AND SOLVENT EFFECTS ON THE RATE OF REDUCTION OF TRIPLET EXCITED THIAZINE DYES BY FERROUS IONS

Abstract— The lifetimes of the triplet excited states of thionine and methylene blue were measured in aqueous and 50 v/v% aqueous acetonitrile solutions acidified with 0.01 N sulfuric or trifluoromethyl-sulfonic acid. The rate constants for reaction of the triplet excited dyes with ferrous ions were measured in the same solutions. The triplet lifetimes in the absence of added quenchers were insensitive to a change in acid from trifluoromethylsulfonic to sulfuric or to a change in solvent from water to 50v/v% aqueous acetonitrile (τ for triplet thionine ˜7.5 μs, τ for triplet methylene blue ˜4.5 μs). In contrast, the rate constant for reaction of the triplet dyes with ferrous ions increased by nearly a factor of 10 with a change in acid from trifluoromethylsulfonic to sulfuric. In solutions containing sulfate ions this reaction rate constant increased with increasing sulfate concentration and with a change in solvent from water to 50 v/v% aqueous acetonitrile. The results are discussed in terms of the possibility of association of the positively charged reactive ions with sulfate anions. Quenching of the triplet excited dyes by ferric ions or by ground state dye molecules was shown to be negligible at the concentration used for the ferrous ion quenching study.     

Time evolution studies of the H2O/quartz interface using sum frequency generation, atomic force microscopy, and molecular dynamics

Many interfacial studies on solid surfaces, for example, quartz/water, assume that a standard cleaning procedure regenerates the surface reproducibly. In the reported work, the results of two surface specific techniques, sum frequency generation (SFG) spectroscopy and atomic force microscopy, show that the effects of prolonged exposure to Nanopure water and to pH 10 NaOH are distinctly different. In conjunction with the experimental data, molecular mechanics is used to correlate the SFG spectral frequencies to the hydrogen stretching vibrations of the surface-bound water molecules. It is found that after 17 days of soaking in water, water molecules penetrate into the SiO2 matrix to produce a swollen and amorphous layer; it is likely that broken Si-O bonds from the polishing process serve as nucleation sites for hydration and swelling. Disorder introduced in the interfacial water layer is detected by the rising intensity of the weakly hydrogen-bonded SFG peak at 3450 cm(-1). Dominance of the 3450 cm(-1) is absent in a pH 10, NaOH-soaked quartz disk, indicating that the strong hydrogen-bonded network in water remains intact.     

Infrared spectra and structures of the Th(OH)2 and Th(OH)4 molecules

Thorium atoms react with H2O2, H2 + O2 mixtures, and H2O in excess argon to form the Th(OH)2 and Th(OH)4 molecules as minor and major products, respectively. The vibrational frequencies observed in the matrix infrared spectra are in excellent agreement with MP2 computed values, which confirms the identification of these highly ionic thorium hydroxide molecules. Our MP2 calculations converge to slightly bent and tetrahedral structures, respectively. This investigation reports the first evidence for pure actinide dihydroxide and tetrahydroxide molecules.     

Infrared spectra of CH3-CrH, CH3-WH, CH2=WH2, and CH[triple bond]WH3 formed by activation of CH4 with Cr and W atoms

Laser-ablated W atoms react with CH4 in excess argon to form the CH3-WH, CH2=WH2, and CH[triple bond]WH3 molecules with increasing yield in this order of product stability. These molecules are identified from matrix infrared spectra by isotopic substitution. Tungsten methylidene and methylidyne hydride molecules are reversibly interconverted by alpha-H transfers upon visible and ultraviolet irradiations. Matrix infrared spectra and DFT/B3LYP calculations show that CH[triple bond]WH3 is a stable molecule with C3v symmetry, but other levels of theory were required to describe agostic distortion for CH2=WH2. Analogous reactions with Cr gave only CH3-CrH, which is calculated to be by far the most stable product.     

A simple proof of Ramanujan’s summation of the1ψ1

A simple proof by functional equations is given for Ramanujan’s₁ ψ ₁ sum. Ramanujan’s sum is a useful extension of Jacobi's triple product formula, and has recently become important in the treatment of certain orthogonal polynomials defined by basic hypergeometric series.     

Immunochemical determination of dioxins in sediment and serum samples

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are considered highly toxic contaminants and the environmental and biological monitoring of these compounds is of great concern. Immunoassays may be used as screening methods to satisfy the growing demand for rapid and low cost analysis. In this work, we describe the application of an immunoassay that uses 2,3,7-trichloro-8-methyldibenzo-p-dioxin (TMDD) as a surrogate standard for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) to sediment and human serum samples. Sample extraction and preparation methods were developed with the aim to establish the simplest, cost-effective and efficient removal of the matrix interferences in the enzyme-linked immunosorbent assay (ELISA). The overall method for sediments is based on a hexane extraction; clean up by a multilayered silica gel column and an activated carbon column; an organic solvent exchange with DMSO–Triton X-100 and ELISA measurement. The gas chromatography–high resolution mass spectrometry (GC–HRMS) validation studies (n = 13) revealed that the method is suitable for the toxic equivalents (TEQ) screening of dioxin in sediments with a method detection limit of about 100 pg g⁻¹ dry sediment with a precision of 13–33% R.S.D. The analysis of a large number of samples originating from different sources would be required to establish more precisely the screening level, as well as the number of false positives and negatives of dioxin TEQ by the immunoassay for sediments. The immunoassay method for sediment analysis offers improvement in speed, sample throughput, and cost in comparison to GC–HRMS. Dioxins were determined in serum samples after a simple liquid–liquid extraction and solvent exchange into DMSO–Triton X-100 without further dilution. The current method (approximate method LOQ of 200 pg ml⁻¹ serum) is not sufficiently sensitive for the determination of dioxins in serum to measure acceptable exposure limit.     

Novel stereoselective control over cis vs trans opening of benzo[c]phenanthrene 3,4-diol 1,2-epoxides by the exocyclic N(2)-amino group of deoxyguanosine in the presence of hexafluoropropan-2-ol

We describe a novel and efficient synthesis (62-84% yields) of the eight possible, diastereomerically pure, cis and trans, R and S O(6)-allyl-protected N(2)-dGuo phosphoramidite building blocks derived through cis and trans opening of (+/-)-3alpha,4beta-dihydroxy-1beta,2beta-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-1 (1)] and (+/-)-3alpha,4beta-dihydroxy-1alpha,2alpha-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-2 (2)] by hexafluoropropan-2-ol (HFP)-mediated addition of O(6)-allyl-3',5'-di-O-(tert-butyldimethylsilyl)-2'-deoxyguanosine (3) at C-1 of the epoxides. Simply changing the relative amount of HFP used in the reaction mixture can achieve a wide ratio of cis/trans addition products. Thus, the observed cis/trans adduct ratio for the reaction of DE-1 (1) in the presence of 5 equiv of 3 varied from 17/83 to 91/9 over the range of 5-532 equiv of HFP. The corresponding ratios for DE-2 (2) varied from 2/98 to 61/39 under the same set of conditions. When 1 or 2 was fused with a 20-fold excess of 3 at 140 degrees C in the absence of solvent HFP, almost exclusive trans addition (>95%) was observed for the both DEs. Through the use of varying amounts of HFP in the reaction mixture as described above, each of the eight possible phosphoramidite oligonucleotide building blocks (DE-1/DE-2, cis/trans, R/S) of the BcPh DE N(2)-dGuo adducts can be prepared in an efficient fashion. To rationalize the varying cis-to-trans ratio, we propose that the addition of 3 to 1 or 2 in the absence of solvent or in the presence of small amounts of HFP proceeds primarily via an S(N)2 mechanism to produce mainly trans-opened adducts. In contrast, increasing amounts of HFP promote increased participation of an S(N)1 mechanism involving a relatively stable carbocation with two possible conformations. One of these conformations reacts with 3 to give mostly trans adduct, while the other conformation reacts with 3 to give mostly cis adduct.     

Secondary and Tertiary Structure of Polysaccharides in Solutions and Gels

Many polysaccharide chains can adopt ordered helical and ribbon-like secondary structures. It seems however that these chains are often so stiff and extended that the cooperative interactions necessary for stability in the solvent environment can only be achieved when inter-chain as well as intra-chain interactions are favorable. Hence we commonly find two-or more-stranded associations of helices, of ribbons, or of helices with ribbons. These can be regarded as tertiary and higher levels of structure. The ordered secondary structure characteristically requires a regular repeating sequence of sugar residues, and the termination of this sequence by insertion of a residue of different type may also terminate the secondary structure and hence the association in which it is involved. This is the mechanism by which native polysaccharides may link up to form three dimensional networks, or gels, in which state they perform their natural roles in maintaining the hydration and integrity of biological tissues. For several polysaccharides there is evidence that the mechanism of biological control over the fine topology and properties of the gel network is mediated by enzymes which modify sugar residues at the polymer level to change the pattern of “interrupting” sugar residues.