Preparation and characterization of 1,2,3‐triazole‐cured polymers from endcapped azides and alkynes

Fourteen commercial polyols have been characterized by GPC, NMR spectroscopy, and elemental analysis. From these, eight corresponding tosylates, six nitrate esters, seven mesylates, 13 alkynes, and 14 azides have been prepared and all these derivatives have been fully characterized. Five alkyne monomers and eight azide monomers were also prepared. Twelve alkynes and 13 azides (functionality 2–4) were combined in 1,3‐dipolar cycloaddition reactions under neat conditions to prepare triazole‐cured polymers, avoiding any heavy metal catalyst. Characterization by NMR spectroscopy, elemental analysis, and gel permeation chromatography indicated triazole polymers 14 , 22 , 23 , 28 , and 30 with degrees of polymerization of 17–28 to be the best candidates for future work. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 238–256, 2008     

Syntheses and reactions of terpene β-hydroxyselenides and β-hydroxydiselenides

A convenient method for the synthesis of optically active trans-hydroxyselenides and trans-hydroxydiselenides from the bicyclic terpene group based on the reactions of sodium selenide or sodium diselenide with cis- and trans-(+)-3-carane, trans-(+)-2-carane and (?)-β-pinane epoxides is described. The corresponding cis-hydroxy and cis-methoxydiselenides were obtained in the reaction of sodium diselenide with β-hydroxy- and β-methoxytosylates. The influence of a hydroxy group at the β-position on the diastereomeric ratio of the products of the asymmetric methoxyselenenylation of styrene has been established by composition of the products, crystal structure analyses, and theoretical calculations using a DFT method on the B3LYP level (6-311G(d)).     

Simultaneous confidence bands for the integrated hazard function

The construction of the simultaneous confidence bands for the integrated hazard function is considered. The Nelson–Aalen estimator is used. The simultaneous confidence bands based on bootstrap methods are presented. Four methods of construction of such confidence bands are proposed. The weird and conditional bootstrap methods are used for resampling. Simulations are made to compare the actual coverage probability of the bootstrap and the asymptotic simultaneous confidence bands. It is shown that the equal-tailed bootstrap confidence band has the coverage probability closest to the nominal one. We also present application of our confidence bands to the data regarding survival after heart transplant. This research was partly supported by AGH grant No. 10.420.03.     

Retention behaviour of some high-intensity sweeteners on different SPE sorbents

The objective of this paper is to provide information about application of solid-phase extraction (SPE) for isolation of nine high-intensity sweeteners (acesulfame-K, alitame, aspartame, cyclamate, dulcin, neotame, saccharin, sucralose and neohesperidin dihydrochalcone) from aqueous solutions. The influence of several types of LC-MS compatible buffers (different pH values and compositions) on their recovery has been studied and discussed. A number of commercially available SPE cartridges, such as Chromabond C18ec, Strata-X RP, Bakerbond Octadecyl, Bakerbond SDB-1, Bakerbond SPE Phenyl, Oasis HLB, LiChrolut RP-18, Supelclean LC-18, Discovery DSC-18 and Zorbax C18 were tested in order to evaluate their applicability for the isolation of analytes. Very high recoveries (better than 92%) of all studied compounds were obtained using formic acid-N,N-diisopropylethylamine buffer adjusted to pH 4.5 and C₁₈-bonded silica sorbents. Behaviour of polymeric sorbents strongly depends on their structure. Strata-X RP behaves much like a C₁₈-bonded silica sorbent. Recoveries obtained using Oasis HLB were comparable with those observed for silica-based sorbents. The only compound less efficiently (83%) retained by this sorbent was cyclamate. Bakerbond SDB-1 shows unusual selectivity towards aspartame and alitame. Recoveries of these two sweeteners were very low (26 and 42%, respectively). It was also found that aspartame and alitame can be selectively separated from the mixture of sweeteners using formic acid-triethylamine buffer at pH 3.5.     

Vibrational spectroscopy differentiates between multipotent and pluripotent stem cells

Over the last few years, there has been an increased interest in the study of stem cells in biomedicine for therapeutic use and as a source for healing diseased or injured organs/tissues. More recently, vibrational spectroscopy has been applied to study stem cell differentiation. In this study, we have used both synchrotron based FTIR and Raman microspectroscopies to assess possible differences between human pluripotent (embryonic) and multipotent (adult mesenchymal) stem cells, and how O(2) concentration in cell culture could affect the spectral signatures of these cells. Our work shows that infrared spectroscopy of embryonic (pluripotent) and adult mesenchymal (multipotent) stem cells have different spectral signatures based on the amount of lipids in their cytoplasm (confirmed with cytological staining). Furthermore, O(2) concentration in cell culture causes changes in both the FTIR and Raman spectra of embryonic stem cells. These results show that embryonic stem cells might be more sensitive to O(2) concentration when compared to mesenchymal stem cells. While vibrational spectroscopy could therefore be of potential use in identifying different populations of stem cells further work is required to better understand these differences.     

Structural changes accompanying excited-state electron transfer in meta- and para-dialkylaminopyridines

The electronic structure of the lowest excited singlet states and molecular geometries of a series of dialkylaminopyridines (DAAPs) representing electron donor–acceptor systems were studied by photostationary and time-resolved UV–vis spectroscopic methods and quantum chemical calculations. The comparative studies allow us to rationalize dual luminescence of 4-DAAPs in terms of the TICT state model—the analysis of the electronic transition dipole moments indicates a nearly orthogonal conformation of the fluorescent ICT states. Introduction of the amino group at meta position as in 3-diisopropylaminopyridine completely changes photophysics of these pyridine derivatives: (i) the Franck-Condon excited state initially reached upon excitation and the solvent equilibrated fluorescent state are most probably of the same nature (both excited states do not correspond to a full separation of charges) and (ii) the electronic structure and geometry of the fluorescent CT states of m-DIAP are solvent dependent.     

Ab initio characterization of the Mg-HF van der Waals complex

The equilibrium structure and the three-dimensional potential energy surface of the Mg-HF van der Waals complex in its ground electronic state have been determined from accurate ab initio calculations using the coupled-cluster method, CCSD(T), in conjunction with the basis sets of triple- through quintuple-zeta quality. The core-electron correlation, high-order valence-electron correlation, and scalar relativistic effects were investigated. The Mg-HF complex was confirmed to be linear at equilibrium, with a vibrationless dissociation energy (into Mg and HF) D(e) of 280 cm(-1). The vibration-rotation energy levels of two isotopologues, (24)Mg-HF and (24)Mg-DF, were predicted using the variational method. The predicted spectroscopic constants can be useful in a further analysis of high-resolution vibration-rotation spectra of the Mg-HF complex.     

Ultrafast spectroscopy and computational study of the photochemistry of diphenylphosphoryl azide: direct spectroscopic observation of a singlet phosphorylnitrene

The photochemistry of diphenylphosphoryl azide was studied by femtosecond transient absorption spectroscopy, by chemical analysis of light-induced reaction products, and by RI-CC2/TZVP and TD-B3LYP/TZVP computational methods. Theoretical methods predicted two possible mechanisms for singlet diphenylphosphorylnitrene formation from the photoexcited phosphoryl azide. (i) Energy transfer from the (π,π*) singlet excited state, localized on a phenyl ring, to the azide moiety, thereby leading to the formation of the singlet excited azide, which subsequently loses molecular nitrogen to form the singlet diphenylphosphorylnitrene. (ii) Direct irradiation of the azide moiety to form an excited singlet state of the azide, which in turn loses molecular nitrogen to form the singlet diphenylphosphorylnitrene. Two transient species were observed upon ultrafast photolysis (260 nm) of diphenylphosphoryl azide. The first transient absorption, centered at 430 nm (lifetime (τ) ～ 28 ps), was assigned to a (π,π*) singlet S(1) excited state localized on a phenyl ring, and the second transient observed at 525 nm (τ ～ 480 ps) was assigned to singlet diphenylphosphorylnitrene. Experimental and computational results obtained from the study of diphenyl phosphoramidate, along with the results obtained with diphenylphosphoryl azide, supported the mechanism of energy transfer from the singlet excited phenyl ring to the azide moiety, followed by nitrogen extrusion to form the singlet phosphorylnitrene. Ultrafast time-resolved studies performed on diphenylphosphoryl azide with the singlet nitrene quencher, tris(trimethylsilyl)silane, confirmed the spectroscopic assignment of singlet diphenylphosphorylnitrene to the 525 nm absorption band.     

Structural evolution of zeolitic imidazolate framework-8

We report the structural evolution of zeolitic imidazolate framework-8 (ZIF-8) as a function of time at room temperature. We have identified the different stages of ZIF-8 formation (nucleation, crystallization, growth, and stationary periods) and elucidated its kinetics of transformation. We hypothesize that the observed semicrystalline-to-crystalline transformation may take place via solution- and solid-mediated mechanisms, as suggested by the observed phase transformation evolution and Avrami's kinetics, respectively. A fundamental understanding of ZIF-8 structural evolution as demonstrated in this study should facilitate the preparation of functional metal-organic framework phases with controlled crystal size and extent of crystallinity.