Reaction of 2-bromomethyl-1,3-thiaselenole with thiourea: en route to the first representatives of 2-(organylsulfanyl)-2,3-dihydro-1,4-thiaselenines

The regioselective reaction of 2-bromomethyl-1,3-thiaselenole 1 with thiourea is accompanied by rearrangement, expanding the ring to afford the corresponding six-membered isothiuronium salt, 2-[amino(imino)methyl]sulfanyl-2,3-dihydro-1,4-thiaselenine hydrobromide 2, a synthon of the 2,3-dihydro-1,4-thiaselenin-2-ylthiolate anion. The latter was used for the synthesis of the first representatives of 2-(organylsulfanyl)-2,3-dihydro-1,4-thiaselenines 3a–g, bis(2,3-dihydro-1,4-thiaselenin-2-yl) disulfide 5 and 1,6-bis(2,3-dihydro-1,4-thiaselenin-2-ylsulfanyl)hexane 6.     

A TEMPO-like nitroxide combined with an alkyl-substituted pyridine: An efficient catalytic system for the selective oxidation of alcohols with iodine

An efficient method for the oxidation of alcohols to aldehydes or ketones in a two-phase CH₂Cl₂/NaHCO₃ (aq.) system, using iodine and catalytic amounts of 4-acetylamino-2,2,6,6-tetramethylpiperidine-1-oxyl and 2,4,6-trimethylpyridine, was developed. The performance of the method was demonstrated by the selective oxidation of 37 variously substituted alcohols in ≥90% yield, including the gram-scale synthesis of the important chemical 2,5-diformylfuran from biomass-derived 5-hydroxylmethylfurfural.     

A dispersive liquid-liquid microextraction using a switchable polarity dispersive solvent. Automated HPLC-FLD determination of ofloxacin in chicken meat

In this article, dispersive liquid-liquid microextraction (DLLME), based on the use of so-called switchable polarity dispersive solvent (SPDS) for microextraction, is presented for the first time. The new extraction technique makes use of a mixture of extraction solvent (dichloromethane) and the SPDS (acrylic acid). This mixture is injected into the aqueous sample solution, which was previously fortified with the alkaline agent (NaOH). The SPDS is dissolved in aqueous phase and a cloudy solution consisting of fine droplets of extraction solvent fully dispersed in the aqueous phase is observed. Simultaneously, as a consequence of the fast neutralization reaction, the SPDS investigated is converted into water-soluble salt and phase separation is achieved because the SPDS switches its polarity. Conversion of the SPDS excludes the negative influence of the conventional dispersive solvents used in DLLME on the solubility of target analytes in aqueous phase and, as a result, increases the DLLME efficiency.     

Real‐time Monitoring of Discrete Synaptic Release Events and Excitatory Potentials within Self‐reconstructed Neuromuscular Junctions

Chemical synaptic transmission is central to the brain functions. In this regard, real‐time monitoring of chemical synaptic transmission during neuronal communication remains a great challenge. In this work, in vivo‐like oriented neural networks between superior cervical ganglion (SCG) neurons and their effector smooth muscle cells (SMC) were assembled in a microfluidic device. This allowed amperometric detection of individual neurotransmitter release events inside functional SCG‐SMC synapse with carbon fiber nanoelectrodes as well as recording of postsynaptic potential using glass nanopipette electrodes. The high vesicular release activities essentially involved complex events arising from flickering fusion pores as quantitatively established based on simulations. This work allowed for the first time monitoring in situ chemical synaptic transmission under conditions close to those found in vivo, which may yield important and new insights into the nature of neuronal communications.     

IR laser and heat-induced changes in annulus fibrosus collagen structure

The purpose of this study was to characterize essential changes in the structure of annulus fibrosus (AF) after hydrothermal and infrared (IR) laser treatment and to correlate these results with alterations in tissue state. Polarization-sensitive optical coherence tomography imaging was used to measure collagen birefringence in AF. Differential scanning calorimetry was used as a complementary technique, providing detailed information on thermodynamic processes in the tissue. Birefringence, peak of the denaturation endotherm, and the enthalpy of denaturation (DeltaHm) were determined before and after hydrothermal heat treatment (85 degrees C for 15 min) and non-ablative Er:glass fiber laser exposures on AF in the whole disk (vertebrae-disk-vertebrae complex). Our data have demonstrated quantitative differences between results of laser and hydrothermal heating. Birefringence did not disappear and DeltaHm did not change after treatment in the water bath, but loss of birefringence and a decrease in the enthalpy did occur after laser exposure. These results could be explained by the photomechanical effect of laser irradiation. We suggest that thermo-mechanical stress played a dominant role in the disruption of the collagen network of AF under non-homogeneous laser heating.     

Design and characterization of two-dye and three-dye binary fluorescent probes for mRNA detection

We report the design, synthesis, and characterization of binary oligonucleotide probes for mRNA detection. The probes were designed to avoid common problems found in standard binary probes such as direct excitation of the acceptor fluorophore and overlap between the donor and acceptor emission spectra. Two different probes were constructed that contained an array of either two or three dyes and were characterized using steady-state fluorescence spectroscopy, time-resolved fluorescence spectroscopy, and fluorescence depolarization measurements. The three-dye binary probe (BP-3d) consists of a Fam fluorophore which acts as a donor, collecting light and transferring it as energy to Tamra, which subsequently transfers energy to Cy5 when the two probes are hybridized to mRNA. This design allows the use of 488 nm excitation, which avoids the direct excitation of Cy5 and at the same time provides a good fluorescence resonance energy transfer (FRET) efficiency. The two-dye binary probe system (BP-2d) was constructed with Alexa488 and Cy5 fluorophores. Although the overlap between the fluorescence of Alexa488 and the absorption of Cy5 is relatively low, FRET still occurs due to their close physical proximity when the probes are hybridized to mRNA. This framework also decreases the direct excitation of Cy5 and reduces the fluorescence overlap between the donor and the acceptor. Picosecond time-resolved spectroscopy showed a reduction in the fluorescence lifetime of donor fluorophores after the formation of the hybrid between the probes and target mRNA. Interestingly, BP-2d in the presence of mRNA shows a slow rise in the fluorescence decay of Cy5 due to a relatively slow FRET rate, which together with the reduction in the Alexa488 lifetime provides a way to improve the signal to background ratio using time-resolved fluorescence spectra (TRES). In addition, fluorescence depolarization measurements showed complete depolarization of the acceptor dyes (Cy5) for both BP-3d (due to sequential FRET steps) and BP-2d (due to the relatively low FRET rate) in the presence of the mRNA target.     

Controlled/living cationic polymerization of styrene with BF3OEt2 as a coinitiator in the presence of water: Improvements and limitations

The controlled/living cationic polymerization of styrene using R-OH/BF₃OEt₂ (R-OH = 1-phenylethanol (1), 2-phenyl-2-propanol (2) and 1-(4-methoxyphenyl)ethanol (3)) at 0 °C in CH₂Cl₂ and in the presence of water was investigated. With 1/BF₃OEt₂, the poor control over molecular weight and molecular weight distribution was ascribed to a competitive protonic initiation induced by water. The molecular weight of the polymers obtained with 2/BF₃OEt₂ and 3/BF₃OEt₂ at low water content ([H₂O] ? 0.11 M) increased in direct proportion to the monomer conversion in agreement with the calculated values, assuming that one initiator molecule generates one polymer chain, but the molecular weight distribution was found relatively broad (M_w/M_n ∼ 1.8). ¹H NMR analyses confirmed that polymerization proceeds via reversible activation of C-OH terminus, but some loss of hydroxyl functionality was revealed. Some trials using high water contents in the recipe ([H₂O] ? 1.6 M) produced only traces of polymer due to catalyst decomposition.     

PtII-mediated 1,3-dipolar cycloaddition of oxazoline N-oxides to nitriles as a key step to dihydrooxazolo-1,2,4-oxadiazoles

A novel type of heterocycle, viz., 2,3a-disubstituted 5,6-dihydro-3aH-[1,3]oxazolo[3,2-b][1,2,4]oxadiazoles, was generated by an intermolecular PtII-mediated 1,3-dipolar cycloaddition (1,3-DCA) between the oxazoline N-oxide C(Me)2CH2OC(R)=N+(O-) (R = Me, Et) and coordinated nitriles in the complexes trans/cis-[PtCl2(R'CN)2] [R' = Me, Et, CH2Ph, Ph, N(C5H10)]. The reaction is unknown for free RCN and oxazoline N-oxides, but under PtII-mediated conditions, it proceeds smoothly (CH2Cl2, 20-25 degrees C, 18-20 h) and gives pure complexes [PtCl2{N=C(R')ONC(R)OCH2CMe2}2] [R/R' = Me/Me, 1; Me/Et, 2; Me/CH2Ph, 3; Me/Ph, 4; Me/N(C5H10), 5; Et/Me, 6; Et/Et, 7; Et/CH2Ph, 8; Et/Ph, 9; Et/N(C5H10), 10] in 42-84% yields after column chromatography. Compounds 1-10 were characterized by elemental analyses (C, H, N), FAB+-MS, IR, and 1H and 13C{1H} NMR spectroscopies, and X-ray diffraction (for 1, 2, 5, and 9). With the exception of benzonitrile complexes, 1,3-DCA of oxazoline N-oxides to the PtII-ligated nitriles occurred diastereoselectively and afforded mixtures of enantiomers. Depending on the substituents on nitriles, asymmetric atoms in both of the formed heterocyclic ligands have the same (SS/RR) or different (SR/RS) configurations. The heterocyclic ligands were liberated from 1-4 and 6-9 by treatment with excess ethane-1,2-diamine (en) in CH2Cl2 for 1 day at 20-25 degrees C (for R' = Me, Et, CH2Ph) and at 50 degrees C (for R' = Ph) to achieve the free organic species and the well-known [Pt(en)2](Cl)2; the products were separated, and 2,3a-disubstituted 5,6-dihydro-3aH-[1,3]oxazolo[3,2-b][1,2,4]oxadiazoles (11-18) were characterized by ESI+-MS and 1H and 13C{1H} NMR spectroscopies.