Gold nanoparticle-based inductively coupled plasma mass spectrometry amplification and magnetic separation for the sensitive detection of a virus-specific RNA sequence

We have developed a sensitive gold nanoparticle (AuNP)-based inductively coupled plasma mass spectrometry (ICP-MS) amplification and magnetic separation method for the detection of oligonucleotide sequences. The assay relies on (i) the sandwich-type binding of two designed probe sequences that specifically recognize the target oligonucleotide sequences, (ii) magnetic bead separation, and (iii) AuNP-based ICP-MS amplification detection. To enhance the analytical signal and minimize the background signal resulting from nonspecific binding, we performed a series of experiments to evaluate the effects of various parameters (the concentration of the capture probe; the time required for hybridization; the number of washings required to eliminate nonspecific binding) on the oligonucleotide detection. Under the optimized conditions, the detection limit was 80zmol (corresponding to 1.6fM of the target sequence in a sample volume of 50μL). Moreover, it employs a shorter hybridization step and ICP-MS, this procedure is relatively simple and rapid (ca. 1.5h). Based on the analytical results obtained using complementary and mismatched sequences, our method exhibits good performance in distinguishing complementary and random oligonucleotides. Compared with the "gold standard" methodology (plaque assay) for the quantification of dengue virus, our method has the capability to allow early detection of dengue virus in complicated and small-volume samples, with high specificity, good analytical sensitivity, and superior time-effectiveness.     

Analyses of non-steroidal anti-inflammatory drugs by on-line concentration capillary electrochromatography using poly(stearyl methacrylate-divinylbenzene) monolithic columns

This study describes the ability of on-line concentration capillary electrochromatography (CEC) coupled with UV or mass spectrometry (MS) for the determination of nine common non-steroidal anti-inflammatory drugs (NSAIDs) in water samples. A series of poly(stearyl methacrylate-divinylbenzene) (poly(SMA-DVB)) monolithic columns, which were prepared by single step in situ polymerization of divinylbenzene (DVB), stearyl methacrylate (SMA) and vinylbenzenesulfonic acid (VBSA, charged monomer), were developed as separation columns for the first time. The effects of polymerization condition of monolithic columns on analyte separations were examined, and the results indicated that separation performances were markedly improved in monolithic columns prepared with short reaction time (3 h) and low SMA:DVB ratio (40/60 ratio of SMA:DVB). Subsequently, an on-line concentration step of step-gradient elution was combined to this CEC system, and by optimizing the difference in eluent strength between the sample matrix and mobile phase, all NSAIDs detection sensitivity were improved (limit of detection (LOD) was 3.4-10 μg/L for UV, and 0.01-0.19 μg/L for MS). When compared to the best CE and LC reports on NSAIDs analyses so far, this on-line concentration CEC method provided better detection ability within shorter separation time (12 min) when either UV or MS detector was employed. This is the first report for on-line concentration CEC with MS detection applied in trace solute analyses of real samples.     

Anti-scratch and transparency properties of transparent conductive carbon nanotube films improved by incorporating polyethoxysiloxane

Transparent conductive films of single-walled carbon nanotubes (SWCNTs) were fabricated by a simple method to significantly enhance anti-scratch and transparency properties by the incorporation of polyethoxysiloxane (PES). The reasons for changes in the mechanical properties and transmittance were investigated through the reflection property and morphology of thin films. With the incorporation of PES, the sheet resistance of the SWCNT thin film remained unchanged after the anti-scratch test. It was found that the transmittance of the thin films suddenly increased when the thickness of the PES layer was ca 100 nm. Although the PES incorporation resulted in a slight increase in the sheet resistance, the experimental results revealed that the sheet resistance of the SWCNT thin films with PES was lower than that of films without PES for the same transmittance due to the increase of the transmittance caused by the PES incorporation. We have demonstrated that the sheet resistance was halved at a transmittance of ～86% due to PES incorporation. SWCNT thin films with PES showed better electrical properties than those without PES after a bend test.     

Influence of membrane layer properties on the electrophoretic behavior of a soft particle

The influence of the physical properties of the membrane layer of a soft particle, which comprises a rigid core and a porous membrane layer, on its electrophoretic behavior, is investigated. Because that influence was almost always neglected in the previous studies, the corresponding results can be unrealistic. The applicability of the model proposed is verified by the available theoretical and experimental results. The electrophoretic mobility of the particle under various conditions is simulated through varying the dielectric constant, the thickness, and the drag coefficient of the membrane layer, and the bulk ionic concentration. We show that under typical conditions, the deviation in the electrophoretic mobility arising from assuming that the dielectric constant of the membrane layer is the same as that of the bulk liquid phase can be in the order of 50%. In addition, the thicker the membrane layer and/or the higher the bulk ionic concentration, the larger the deviation. If the surface of the core of the particle is charged, as in the case of inorganic particles covered by an artificial membrane layer, the deviation at constant core surface potential is larger than that under other types of charged conditions. However, if the surface of the core is uncharged, as in the case of biocolloids, then that deviation becomes negligible. These findings are of fundamental significance to theoreticians in their analysis on the electrokinetic behaviors of soft particles, and to experimentalists in the interpretation of their data.     

X-Ray spectra and electronic correlations of FeSe(1-x)Te(x)

Critical issues concerning emerging Fe-based superconductors include the degree of electron correlation and the origin of the superconductivity. X-Ray absorption spectra (XAS) and resonant inelastic X-ray scattering spectra (RIXS) of FeSe(1-x)Te(x) (x = 0-1) single crystals were obtained to study their electronic properties that relate to electron correlation and superconductivity. The linewidth of Fe L(2,3)-edges XAS of FeSe(1-x)Te(x) is narrower than that of Fe-pnictides, revealing the difference between their hybridization effects and localization character and those of other Fe-pnictides. While no significant differences exist between the Fe L-edge XAS and RIXS of FeSe(1-x)Te(x) and those of Fe-pnictides, Se K-edge and Te K-edge XAS exhibit substantial edge shift, suggesting that the superconductivity in an Fe-Se superconductor is strongly associated with the ligand states. A comparison of the Se K-edge and Te K-edge spectra reveals that the charge transfer may occur between Se and Te. Given the Coulomb interaction and the bandwidth, the spectral results indicate that FeSe(1-x)Te(x) is unlikely to be a weakly correlated system unlike the Fe-pnictides of the "1111" and "122" families. The spectral results further demonstrate that superconductivity in this class of Fe-based compounds is strongly associated with the ligand 4p hole state.     

Why aggregated carbon nanotubes exhibit low quantum efficiency

Aggregation of carbon nanotubes reduces quantum efficiency and the phenomenon is found to be related to photocurrent leakage through oxygenated lattices acting as low barrier intertube channels. This outcome is supported by calculation and optical excitation experiments.     

The role of CH-π interaction in the charge transfer properties in tris(8-hydroxyquinolinato)aluminium(III)

The charge mobility is a key property in many electro-optical materials, with charge transfer (CT) taking place in a solid matrix of molecules. Large intermolecular electronic interaction is one of the key factors for a good CT rate, which is dependent on both intra- and intermolecular structures. The connection of the molecular structure with the intermolecular CT property would facilitate the search for a new material with desirable CT property, but currently it is still quite limited by the lack of knowledge for intermolecular configurations. In the present work, we study factors influencing the intermolecular configurations, and subsequently the CT property, in tris(8-hydroxyquinolinato) aluminium(III) (AlQ(3)) from all currently available crystal structures. We found that there exists a pair of CH-π interactions in a good majority of the π-π stacked bimolecular configurations. Such CH-π and π-π interacting structures are also seen in the crystal structures of many other similar molecules. With both experimental and simulated structures, we show that the CH-π interaction stabilizes the bimolecular configurations, and drives the structure towards a region with a higher electron transfer coupling and lower hole transfer coupling. This effect likely affects the electron transport property of AlQ(3), since it is consistent with recent experimental results, where AlQ(3) analogs with their CH-π interaction blocked either require a higher operating voltage in light-emitting devices [Sapochak et al., J. Am. Chem. Soc., 2001, 123, 6300], or become bipolar in their charge mobilities [Liao et al., J. Am. Chem. Soc., 2009, 131, 763]. CH-π interaction is commonly seen in aromatic molecules, which are frequently used as building blocks in molecules for electro-optical applications. Our work points out a possible way to enhance the desired CT property in the design of new materials.