Single-photon vacuum-ultraviolet laser-pulsed-field ionization-photoelectron studies of trans- and cis-1-bromopropenes

The vacuum-ultraviolet (VUV) pulsed-field ionization-photoelectron (VUV-PFI-PE) spectra of trans-1-bromopropene (trans-CH(3)CH[Double Bond]CHBr) and cis-1-bromopropene (cis-CH(3)CH[Double Bond]CHBr) have been measured in the energy region of 74 720-76 840 cm(-1). The simulation of fine structures observed in the origin VUV-PFI-PE vibrational bands of these molecules has provided the ionization energies (IEs) of trans-1-bromopropene and cis-1-bromopropene to be 74 779.3+/-2.0 cm(-1) (9.2715+/-0.0002 eV) and 75 140.2+/-2.0 cm(-1) (9.3162+/-0.0002 eV), respectively. The vibrational bands resolved in these VUV-PFI-PE spectra at energies 0-1700 cm(-1) above the IEs of trans-1-bromopropene and cis-1-bromopropene have been assigned based on theoretical vibrational frequencies and calculated Franck-Condon factors for the ionization transitions.     

Excess partial molar enthalpies,entropies, Gibbs energies,and volumes in aqueous dimethylsulfoxide

The excess partial molar enthalpies, the vapor pressures, and the densities of dimethylsulfoxide (DMSO)–H₂O mixtures were measured and the excess partial molar Gibbs energies and the partial molar volumes were calculated for DMSO and for H₂O. The values of the excess partial molar Gibbs energies for both DMSO and H₂O are negative over the entire composition range. The results for the water-rich region indicated that the presence of DMSO enhances the hydrogen bond network of H₂O. Unlike monohydric alcohols, however, the solute-solute interaction is repulsive in terms of the Gibbs energy. This was a result of the fact that the repulsion among solutes in terms of enthalpy surpassed the attraction in terms of entropy. The data in the DMSO-rich region suggest that DMSO molecules form clusters which protect H₂O molecules from exposure to the nonpolar alkyl groups of DMSO.     

Spectrophotometric determination of tannins in tea and beer samples with iron(III) and 1,10-phenanthroline as reagents

A simple and accurate spectrophotometric method is proposed for the determination of tannins in tea and beer samples based on the reduction of iron(III) to iron(II) by tannins at 80 degrees C for 20 min. The iron(II) was then reacted with 1,10-phenanthroline at pH 4.4 to form a coloured complex. Background correction could be effected by precipitating the tannins in the sample solution twice with gelatin and kaolin. Absorbance measurements were made at 540 nm and the calibration graph was linear from 0 to 5.5 micrograms ml-1 of tannic acid with a slope of 0.213 A p.p.m.-1. The precision for the determination of tannins in a tea sample containing 9.45% of tannins was 1.8%. Most of the ingredients commonly found in tea and beer samples do not interfere with the determination. Several tea and beer samples were analysed for their tannin content using the proposed method.     

Di‐2‐pyridyl ketone N4,N4‐(butane‐1,4‐diyl)thiosemicarbazone

The title compound, C₁₆H₁₇N₅S, is in the thione form and crystallizes with two independent mol­ecules in the asymmetric unit. In both mol­ecules, the penta­methyl­ene­imine five‐membered ring adopts an envelope conformation, and in one of the molecules this ring shows positional disorder. The thione S and hydrazine N atoms are in the Z configuration with respect to the C—N bond.     

Theoretical study of the Diels-Alder reactions between singlet (1Delta g) oxygen and acenes

The G3(MP2) method has been employed to study the 1,4-addition reactions between singlet oxygen and five acenes, including benzene, naphthalene, anthrecene, tetracene, and pentacene. In all, nine pathways between O(2) and the five acenes have been investigated. Our calculated results indicate that all nine pathways are concerted and exothermic and that the most reactive sites on the acenes are the center ring's meso-carbons. In addition, reactivity increases along the series benzene < naphthalene < anthrecene < tetracene < pentacene. This trend is identical to that of aromaticity for the five acenes. A correlation between reactivity and aromaticity is briefly rationalized with natural bond orbital (NBO) analysis and frontier molecular orbital (FMO) analysis. Furthermore, some experimental kinetics data from the literature supporting the calculated results are cited.     

Stoichiometric and catalytic oxidations of alkanes and alcohols mediated by highly oxidizing ruthenium-Oxo complexes bearing 6, 6'-dichloro-2,2'-bipyridine

The ruthenium(II) complex cis-[Ru(6, 6'-Cl(2)bpy)(2)(OH(2))(2)](CF(3)SO(3))(2) (1) is a robust catalyst for C-H bond oxidations of hydrocarbons, including linear alkanes, using tert-butyl hydroperoxide (TBHP) as terminal oxidant. Alcohols can be oxidized by the "1 + TBHP" protocol to the corresponding aldehydes/ketones with high product yields at ambient temperature. Oxidation of 1 with Ce(IV) in aqueous solution affords cis-[Ru(VI)(6, 6'-Cl(2)bpy)(2)O(2)](2+), which is isolated as a green/yellow perchlorate salt (2). Complex 2 is a powerful stoichiometric oxidant for cycloalkane oxidations under mild conditions. Oxidation of cis-decalin is highly stereoretentive; cis-decalinol is obtained in high yield, and formation of trans-decalinol is not observed. Mechanistic studies showing a large primary kinetic isotope effect suggest a hydrogen-atom abstraction pathway. The relative reactivities of cycloalkanes toward oxidation by 2 have been examined through competitive experiments, and comparisons with Gif-type processes are presented.     

Ethynylated N-phenylbenzimidazoles: Synthesis and thermal properties

Three diethynylated bisbenzimidazole prepolymers were synthesized and their polymerization characteristics examined. N-phenyl-substituted diethynylated bisbenzimidazoles melted between 250 and 265°C and had gel times of several seconds to several minutes. In contrast, an N-phenoxyphenyl diethynylated bisbenzimidazole melted at a temperature sufficiently low (ca. 150°C) to provide a 5-min gel time at 170°C and a 4-min gel time at 210°C. This material showed promise as a potential laminating resin and a brief screening of the prepolymer for this application was carried out. The polymers of both N-phenyl- and N-phenoxyphenyl-substituted diethynylated bisbenzimidazoles showed apparent degradation temperatures of 500°C or greater when examined by thermogravimetric analysis.     

Bis[1,1′‐bis(diphenylphosphino)ferrocenium] hexadecachlorotetraantimony(III) ethanol solvate

In the title compound, [Fe(C₁₇H₁₄P)₂]₂[Sb₄Cl₁₆]·C₂H₆O, the Fe atoms lie on inversion centres and the pairs of cyclopentadienyl rings are consequently in a fully staggered conformation. The centrosymmetric anionic clusters formed by [Sb₄Cl₁₆]^4? are surrounded by the cations and are held together by weak C—H?Cl interactions. These formations stack along the a axis to form columns, and the columns are interconnected by another weak C—H?Cl interaction along the b axis.     

Theoretical studies on the metathesis processes, (Tp(PH3)MR(eta 2-H[bond]CH3)]-->[Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe,Ru, and Os; R=H and CH3)

Theoretical calculations on the metathesis process, [Tp(PH3)MR(eta 2-H[bond]CH3)] --> [Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe, Ru, and Os; R=H and CH3), have been systematically carried out to study their detailed reaction mechanisms. Other than the one-step mechanism via a four-center transition state and the two-step mechanism through an oxidative addition/reductive elimination pathway, a new one-step mechanism, with a transition state formed under oxidative addition, has been found. Based on the intrinsic reaction coordinate calculations, we found that the trajectories of the transferring hydrogen atom in the metathesis processes studied are similar to each other regardless of the nature of reaction mechanisms.     

Selective, controllable, and reversible aggregation of polystyrene latex microspheres via DNA hybridization

The directed three-dimensional self-assembly of microstructures and nanostructures through the selective hybridization of DNA is the focus of great interest toward the fabrication of new materials. Single-stranded DNA is covalently attached to polystyrene latex microspheres. Single-stranded DNA can function as a sequence-selective Velcro by only bonding to another strand of DNA that has a complementary sequence. The attachment of the DNA increases the charge stabilization of the microspheres and allows controllable aggregation of microspheres by hybridization of complementary DNA sequences. In a mixture of microspheres derivatized with different sequences of DNA, microspheres with complementary DNA form aggregates, while microspheres with noncomplementary sequences remain suspended. The process is reversible by heating, with a characteristic "aggregate dissociation temperature" that is predictably dependent on salt concentration, and the evolution of aggregate dissociation with temperature is observed with optical microscopy.