Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.     

Highly regio- and stereoselective hydrometallation reactions of fluorine-containing internal alkynes: Novel approaches to fluoroalkylated alkenes

Hydroalumination, hydrocupration, and hydroboration reactions of various fluorine-containing alkynes were investigated. The alkyne reacted smoothly with 2.0 equiv. of Red-Al at −78 °C to give the hydroaluminated adduct in a highly regio- and stereoselective manner, which was treated with iodine, the corresponding vinyliodide being produced in moderate yield. Hydrocupration of the alkynes also took place, but the resulting vinylmetal reacted with various electrophiles sluggishly. In sharp contrast, the reaction with dicyclohexylborane proceeded smoothly to afford the cis-addition products preferentially, which were subjected to Suzuki-Miyaura cross-coupling reaction, leading to trisubstituted alkenes in high yields.     

Chiral recognition of amino acids and dipeptides by a water-soluble zinc porphyrin

A chiral water-soluble zinc porphyrin was optically resolved on a chiral HPLC column, and the binding of chiral amino acids and peptides to each of the enantiomers was examined spectrophotometrically in basic aqueous solution. The binding data apparently indicated that the zinc porphyrin has chiral selectivity for amino acids and dipeptides. This was reasonably explained in terms of the triple cooperation of coordination, Coulomb, and steric interactions of the chiral amino carboxylates with the porphyrin. A compensatory relationship among the thermodynamic parameters for chiral recognition was also shown.     

Different reaction modes for the oxidative dimerization of epoxyquinols and epoxyquinones. Importance of intermolecular hydrogen-bonding

An oxidative dimerization reaction, involving the three successive steps of oxidation, 6 pi-electrocyclization, and Diels-Alder reaction, has been experimentally and theoretically investigated for the three 2-alkenyl-3-hydroxymethyl-2-cyclohexen-1-one derivatives epoxyquinol 3, epoxyquinone 6, and cyclohexenone 10. Of the sixteen possible modes of the oxidation/6 pi-electrocylization/Diels-Alder reaction cascade for the epoxyquinone 6, and eight for the cyclohexenone 10, only the endo-anti(epoxide)-anti(Me)-hetero and endo-anti(Me)-hetero modes are, respectively, observed, while both endo-anti(epoxide)-anti(Me)-hetero and exo-anti(epoxide)-anti(Me)-homo reaction modes occur with the epoxyquinol 3. Intermolecular hydrogen-bonding is found to be the key cause of formation of both epoxyquinols A and B with 3, although epoxyquinone 6 and cyclohexenone 10 both gave selectively only the epoxyquinol A-type product. In the dimerization of epoxyquinol 3, two monomer 2H-pyrans 5 interact with each other to afford intermediate complex 28 or 29 stabilized by hydrogen-bonding, from which Diels-Alder reaction proceeds. Theoretical calculations have also revealed the differences in the reaction profiles of epoxyquinone 6 and cyclohexenone 10. Namely, the rate-determining step of the former is the Diels-Alder reaction, while that of the latter is the 6 pi-electrocyclization.     

Biphotonic ionization of 8-anilino-1-naphthalenesulfonate in polar solvents

The photoionization of 8-anilino-1-naphthalenesulfonate in polar solvents occurs through a biphotonic process, as proved by nanosecond flash photolysis. A transient absorption of a charge transfer to solvent (CTTS) state is found with ≈10 ns life-time. The state is shown to be an intermediate of the photoionization process.     

Multi-component coupling synthesis of polycyclic pyrrole derivatives via Ir- and Rh-catalyzed cycloisomerizations with microwave heating

CuBr₂-catalyzed three-component coupling of N-benzylallylamine, ethyl glyoxalate, and terminal alkynes afforded glycinate-tethered 1,6-enynes, which were further transformed into polycyclic pyrrole-2-carboxylates via iridium-catalyzed cycloisomerization/Diels-Alder cycloaddition/dehydrogenation sequence under conventional and microwave heating conditions. The corresponding β-amino acid analogues were obtained from the Ir-catalyzed reaction of enynes prepared from lithium amides of allylamines with methyl non-2-en-4-ynoate. The Cu-catalyzed Mannich-type condensation was further extended to the synthesis of the glycinate-tethered dienyne and cyclopropylenyne, which were subjected to Rh-catalyzed cycloisomerizations to furnish bicyclic amino acids.     

Concise and highly stereocontrolled synthesis of 1-deoxygalactonojirimycin and its congeners using dioxanylpiperidene,a promising chiral building block

[reaction: see text] A concise and stereoselective synthesis of the chiral building block, dioxanylpiperidene 4 as a precursor for deoxyazasugars, starting from the Garner aldehyde 5 using catalytic ring-closing metathesis (RCM) for the construction of the piperidine ring is described. The asymmetric synthesis of 1-deoxygalactonojirimycin and its congeners 1-3 was carried out via the use of 4 in a highly stereocontrolled mode.     

Density functional theory investigation of Eu(III) complexes with beta-diketonates and phosphine oxides: model complexes of fluorescence compounds for ultraviolet LED devices

The density functional theory was employed to investigate Eu(III) complexes with three beta-diketonates and two phosphine oxides (complex M1: Eu(bdk)3(TPPO)2, complex M2: Eu(bdk)3(TMPO)2, and complex M3: Eu(bdk)3(TPPO)(TMPO)) deemed to be the model complexes of the fluorescence compounds for the ultraviolet LED devices we have recently developed. For each complex, two minimum energy points corresponding to two different optimized geometries (structures A and B) have been found, and the difference of the energy between two minimum energy points is found to be quite small (less than 1 kcal/mol). Vertical excitation energies and oscillator strengths for each complex at two optimized geometries have been obtained by the time-dependent density functional theory, and the character of the excited states has been investigated. For complex M3, the absorption edge is red-shifted, and the oscillator strengths are relatively large. The efficiency of intersystem crossing and energy transfer from the triplet excited state to the Eu(III) ion is considered by calculating DeltaE(ISC) (the energy difference between the first singlet excited state and the first triplet excited state) and DeltaE(ET) (the difference between the excitation energy of the complex for the first triplet excited state and the emission energy of the Eu(III) ion for 5D to 7F).     

The synthesis of hexahydrooxoepithiopyridinedicarboximides by the reaction of thioamides with N-substituted maleimides

The synthesis of hexahydrooxoepithiopyridinedicarboxyimide (5: X₂ = N-Ph) by the reaction of thioamides 1 with N-substituted maleimide ( 2a ) was examined. The reaction of primary thioamides, such as thiobenzamide and p-toluthioamide with N-phenylmaleimide gives compounds 5 together with corresponding 4-hydroxy-1,3-thiazoles 4 . However, a similar reaction of secondary thioamides, such as N-methylthioacetamide, thiobenzanilide, with N-phenylmaleimide did not provide compounds 5 without addition of acid. The reaction pathway and the configuration of 5 were also investigated.