Emission-spectrometric determination of trace non-rare earth elements in yttrium oxide using AgF-Ga2O3 mixed carrier

Summary An emission-spectrometric method is described for the quantitative determination of traces of non-rare earth elements in yttrium oxide, employing addition of AgF-Ga₂O₃ mixed carrier. This addition effects an increase of the rate of evaporation of the analytical elements and of the number of atoms in the arc plasma. It enhances the sensitivity of the analytical elements to a larger extent than other carriers and permits the determination of microquantities of the elements (Mg, Ca, Mn, Co, Fe, Pb, Cu, Cd, Al, B, Sn, As, Bi) within limits of detection from 0.1 to 13 ppm in high-purity yttrium oxide. The coefficients of variation are less than 20%.

---

Emissionsspektrometrische Bestimmung von nicht zu den Seltenen Erden gehörenden Elementspuren in Yttriumoxid mit Hilfe eines AgF-Ga₂O₃ -Trägergemisches

Zusammenfassung Das Trägergemisch bewirkt eine Erhöhung der Verdampfungsgeschwindigkeit der zu bestimmenden Elemente und der Anzahl der Atome im Bogenplasma. Es verbessert mehr als andere Träger die Empfindlichkeit und ermöglicht die Bestimmung von Mikromengen der Elemente (Mg, Ca, Mn, Co, Fe, Pb, Cu, Cd, Al, B, Sn, As, Bi) in hochreinem Yttriumoxid mit Nachweisgrenzen von 0,1–13 ppm. Die Variationskoeffizienten liegen unter 20%.

     

1,4-cycloheptylene and the related allylic diradicals. Thermal nitrogen extrusion from 6,7-diazabicyclo[3.2.2]Non-6-enes

Thermal nitrogen extrusion of 2-methylene-6,7-diazabicyclo[3.2.2]non-6-enes and 6,7- diazabicyclo[3.2.2]nona-2,6-diene,6 proceeded easily to give closure and cleavage products $\text{via}$ the corresponding 5-methylene-1,4-cycloheptylenes and 4-cyclohepten-1,3-ylenes, respectively.     

Capacitance-conductance detector for high-pressure liquid chromatography. Application to alkaloids and fatty acids

Summary A new type of detector for high-pressure liquid chromatography has been designed. This detector is equipped with a RC resonance circuit, and is similar to the capacitance detector previously reported. It is operated as a capacitance detector with nonpolar eluents; while with polar solvents, it behaves as a conductance detector. Electrolytes such as salts, acids and bases are sensitively detected. The detector was successfully used for the detection of fatty acids and alkaloids.

---

Zusammenfassung Ein neuartiger Detektor für die Hochdruck-Flüssigchromatographie wurde entwickelt. Dieser ist mit einem Resonanzstromkreis ausgestattet und ähnelt dem kürzlich beschriebenen Kapazitanz-Detektor. Als solcher funktioniert er mit nichtpolaren Eluenten, während er sich mit polaren Lösungsmitteln wie ein Leitfähigkeitsdetektor verhält. Salze, Säuren und Basen werden empfindlich nachgewiesen. Das Gerät wurde zum Nachweis von Fettsäuren und Alkaloiden verwendet.

     

Studies of Japanese lacquer: Urushiol dimerization by the coupling reaction between urushiol quinone and a triolefinic component of urushiol

Previously, the formation of urushiol quinone from urushiol was demonstrated in the laccase-catalyzed oxidation process of the sap of the Japanese lacquer tree (Rhus vernicifera D.C.) or of lacquer formed from it. This paper presents the results of the investigation on the participation of urushiol quinone in the oxidative polymerization and crosslinking of the sap or the lacquer. The polymeric urushiol was obtained by the fractionation of the mildly oxidized sap (Japanese lacquer), and a specific dimeric urushiol was isolated from it by thin-layer chromatography (TLC). Structural analysis of the dimer illustrated that it has a conjugated triene structure and may be formed by a coupling reaction between urushiol quinone and a triolefinic component of urushiol. Further support for this was given by the spectroscopic study of the reaction between 4-tert-butyl-o-quinone and the triolefinic component of dimethylurushiol, and by the isolation and identification of the coupling product between them.     

Optimal laser control of ultrafast photodissociation of I2- in water: mixed quantum/classical molecular dynamics simulation

A linearized optimal control method in combination with mixed quantum/classical molecular dynamics simulation is used for numerically investigating the possibility of controlling photodissociation wave packets of I(2)(-) in water. Optimal pulses are designed using an ensemble of photodissociation samples, aiming at the creation of localized dissociation wave packets. Numerical results clearly show the effectiveness of the control although the control achievement is reduced with an increase in the internuclear distance associated with a target region. We introduce effective optimal pulses that are designed using a statistically averaged effective dissociation potential, and show that they semiquantitatively reproduce the control achievements calculated by using optimal pulses. The control mechanisms are interpreted from the time- and frequency-resolved spectra of the effective optimal pulses.     

Protonation-induced structural change of lyotropic liquid crystals in oley- and alkyldimethylamine oxides/water systems

Lyotropic phase behavior of the nonionic and the half-ionized oleyldimethylamine oxide (OlDMAO)/water systems was investigated using polarized light microscopy, small-angle X-ray diffraction, and differential scanning calorimetry. Nonionic OlDMAO formed isotropic micellar solution, nematic, hexagonal, cubic, and lamellar liquid crystalline phases as the surfactant concentration increased. In contrast, half-ionized OlDMAO (i.e., 1:1 mixture of the nonionic and the protonated species) had a greater tendency to form bilayer structures, and the phase diagram became quite similar to those of double-chained ionic surfactants rather than single-chained ones, despite the introduction of positive charges to the nonionic one. The preference of the bilayer structures in the half-ionized OlDMAO was interpreted in terms of the dimers stabilized by the hydrogen bond between the nonionic and protonated species. For alkyldimethylamine oxides with a saturated hydrocarbon chain (CnDMAO, chain length: n = 14, 16, and 18), the phase sequence of lyotropic liquid crystals was hardly affected by the protonation, but an elongation of the cylinders of the hexagonal phase was observed for the half-ionized C14DMAO. Consequently, it can be considered that the dominant bilayer formation of the half-ionized OlDMAO is attributed to the combined effect of the hydrogen-bonded dimer formation and the cis-double-bond configuration of the alkyl chain.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Studies on polymers containing functional groups. II. Polymerization behavior of o-hydroxystyrene

The polymerization behavior of o-hydroxystyrene with free-radical and cationic initiators and without an initiator was examined. The structures thus obtained were estimated. Although polymerization behavior of o-hydroxystyrene was rather complicated, according to the results, it appeared that each polymerization more or less might simultaneously follow the two types of mechanisms: normal vinyl polymerization and polymerization through the addition to benzene nuclei. The proportion of addition to benzene nuclei was considered to be highest in the polymerization with BF₃·(OEt)₂ and lowest in that with azobisisobutyronitrile. Degrees of polymerization of these polymers were low in all cases (42–82). Some brief experiments on copolymerization of o-hydroxystyrene were carried out.     

Effect of hydrophobic amino acids on the conformational change of decapeptides in micellar environments

A series of peptides containing various hydrophobic amino acids [methionine (Met), leucine (Leu), norleucine (Nle), phenylalanine (Phe), 2-aminooctanoic acid (Aoc), and 2-aminodecanoic acid (Ade)] were synthesized and their conformations were studied using circular dichroism (CD) spectroscopy in different solvents such as water, methanol, and aqueous solution of ammonium tetradecanesulfonate. Peptides containing hydrophobic amino acids with linear side chains formed -sheets in water and methanol. Electrostatic interaction between the charged side chain (lysine) and a micelle consisting of an anionic surfactant, ammonium tetradecanesulfonate, is necessary for the formation of -helices in micellar environments. The conformational transition from -helix to -sheet structure required moderate hydrophobicity and linear side chains. This conformational transition depended on the surfactant concentration.