Photoresponsive porphyrin-imprinted polymers prepared using a novel functional monomer having diaminopyridine and azobenzene moieties

A novel photoresponsive functional monomer bearing diaminopyridine and azobenzene moieties was synthesized and applied to the preparation of photo-regulated molecularly imprinted polymers, which can recognize porphyrin derivatives through hydrogen bonding. The binding affinity of the imprinted cavities was regulated by UV irradiation, suggesting that azobenzene groups located inside the binding sites worked as photosensitizers and the trans-cis isomerization could regulate the affinity for the target compounds. Repetitive binding of the target compound to trans-IP and cis-IP was directly monitored by slab optical waveguide spectroscopy and the photo-mediated regulation of binding affinity was successfully confirmed.     

Size-selective photocatalytic reactions by titanium(IV) oxide coated with a hollow silica shell in aqueous solutions

A novel core-shell composite photocatalyst, commercially available titanium(IV) oxide (TiO(2)) particles directly incorporated into a hollow amorphous silica shell, was fabricated by successive coating of TiO(2) with a carbon layer and a silica layer followed by heat treatment to remove the carbon layer. The composite induced efficient photocatalytic reactions when relatively small substrates were used, such as methanol dehydration and decomposition of acetic acid, without any reduction in the intrinsic activity of original TiO(2), but did not exhibit efficient photocatalytic activity for decomposition of large substrates, methylene blue and polyvinyl alcohol. The unique size-selective properties of the composites are due to their structural characteristics, i.e., the presence of a pore system and a void space in the silica shell and between the shell and medial TiO(2) particles, respectively. The loading of alkylsilyl groups on the surface of the composite led to highly photostable floatability: the floated sample also induced efficient photocatalytic reaction for decomposition of acetic acid while retaining floatation at the gas/water interface.     

Optical nanosensor design with uniform pore geometry and large particle morphology

Appropriate design of nanosensors for optically selective, sensitive sensing systems is needed for naked-eye detection of pollutants for environmental cleanup of toxic heavy-metal ions. Mesostructured materials with two- or three-dimensional (2D or 3D) geometries and large particle morphologies show promise as probe carriers, and can therefore be used to reproducibly fabricate uniformly packed nanosensors. This is the first report on the effects of significant key properties of the mesostructured carriers, such as morphology, geometry, and pore shape, on the functionality of optical nanosensor designs. Such mesostructured sensors with superior physical characteristics can be used as components in sensing systems with excellent stability and sensitivity, and with rapid detection response. The nanosensor design can enhance the selectivity even at low concentrations of the pollutant target ions (nanomolar level). Among the nanosensors developed here, the large pore-surface grains of highly ordered 3D monoliths (HOM) exhibited a high adsorption capability of the Pyrogallol Red probe and high accessibility to analyte ion transport, leading to possible naked-eye detection of Sb(III) ions at concentrations as low as 10(-9) mol dm(-3) and at a wide detection range of 0.5 ppb to 3 ppm. A key finding in our study was that our mesostructured nanosensor designs retained highly efficient sensitivity without a significant increase in kinetic hindrance, despite the slight decrease of the specific activity of the electron acceptor/donor strength of the probe functional group after several regeneration/reuse cycles. The results, in general, indicate that large-scale reversibility of optical nanosensors is feasible in such metal-ion sensing systems.     

One-pot solid-phase glycoblotting and probing by transoximization for high-throughput glycomics and glycoproteomics

The development of rapid and efficient methods for high-throughput protein glycomics is of growing importance because the glycoform-focused reverse proteomics/genomics strategy will greatly contribute to the discovery of novel biomarkers closely related to cellular development, differentiation, growth, and aging as well as a variety of diseases such as cancers and viral infection. Recently, we communicated that rapid and efficient purification of carbohydrates can be achieved by employing sugar-specific chemical ligation with aminooxy-functionalized polymers, which we termed "glycoblotting" (see S.-I. Nishimura et al., Angew. Chem. 2005, 117, 93-98; Angew. Chem. Int. Ed. 2005, 44, 91-96). The chemoselective blotting of oligosaccharides present in crude biological materials onto synthetic polymers relies on the unique oxime-bond formation between aminooxy group displayed on the supporting materials and aldehyde/ketone group at the reducing terminal of all oligosaccharides, thus enabling highly selective and rapid oligosaccharide purification. Aiming to improve the detection sensitivity of the released oligosaccharides, we introduce here a novel strategy for one-pot solid-phase glycoblotting and probing by transoximization. We found that oligosaccharides captured by the polymer supports via the oxime bond can be released in the presence of excess O-substituted aminooxy derivatives in a weakly acidic condition. The released oligosaccharides could be recovered as newly formed oxime derivatives of the O-substituted aminooxy compound added, thus demonstrating the simultaneous releasing and probing. In addition, we synthesized a novel aminooxy-functionalized monomer, N-[2-[2-(2-tert-butoxycarbonylaminooxyacetylamino-ethoxy)ethoxy]ethyl]-2-methacrylamide, which allows for the large-scale preparation of a versatile polymer characterized by its high stability, high blotting capacity, and easy use. The one-pot protocol allowed to profile 23 kinds of N-glycan chains of human serum glycoproteins. This concept was further applied for the glycopeptides analysis in a crude mixture followed by galactose oxidase treatment to generate free aldehyde group at the non-reducing terminal of oligosaccharide moiety of glycopeptides. Our technique may be implemented in existing biochemistry and molecular diagnostics laboratories because enriched oligosaccharides and glycopeptides by solid-phase transoximization with high-sensitive labeling reagents are widely applicable in a variety of common analytical methods using two-dimensional HPLC, LC/MS, and capillary electrophoresis as well as modern mass spectrometry.     

Simple and sensitive quantification of bioactive peptides in biological matrices using liquid chromatography/selected reaction monitoring mass spectrometry coupled with trichloroacetic acid clean-up

A simple and sensitive liquid chromatography/electrospray ionization tandem mass spectrometric (LC/ESI-MS/MS) method has been developed for the quantification of bioactive peptides in biological fluids. The method employs protein precipitation with 4% trichloroacetic acid (TCA) and selected reaction monitoring (SRM) using an immonium ion as the product ion. This method was applied to determine the synthetic parathyroid hormone (PTH) analog (MW 1721) in rat plasma and human hepcidin-25 (MW 2789) in human serum. TCA clean-up showed a sufficient recovery for peptides with a MW of less than 3000, and would be useful as a simple and rapid method because of direct injection of the supernatant without evaporation or dilution. In addition, TCA clean-up allowed us not only to reduce sample preparation time, but also to select an immonium ion as a product ion of SRM, which led to detection more sensitive than SRM using other types of product ions. The lower limits of quantitation (LLOQs) of the PTH analog and the human hepcidin-25 were 0.2 ng/mL and 5 ng/mL, respectively. This method was fully validated with acceptable linearity, intra- and inter-assay precisions, and accuracy. Furthermore, this simple and rapid method is applicable to pharmacokinetic studies.     

Changes in carbon and nitrogen stable isotopes of chironomid larvae during growth, starvation and metamorphosis

We conducted experiments to determine isotope changes in the deposit-feeding chironomid larvae Chironomus acerbiphilus during feeding, starvation and metamorphosis. Isotope changes in chironomid larvae occurred mainly during growth and rarely afterward. This finding indicates that chironomid isotope turnover mainly occurs in conjunction with growth and suggests that chironomid larvae only break down newly assimilated food for energy during periods of no growth. Chironomid delta(13)C values significantly increased throughout the starvation experiment, indicating that chironomids preferentially break down components with lower delta(13)C content during starvation. We found significant changes in chironomid isotope ratios ((15)N enrichment) during pupation. This evidence suggests that the physiological condition of animals (such as during an active growth phase or pre- or post-molting) is important to their stable isotope ratios.     

Cowaniin, a C-glucosidic ellagitannin dimer linked through catechin from Cowania mexicana

A new complex tannin, cowaniin (1) was isolated from the leaves and stems of Cowania mexicana (Rosaceae), and its structure was characterized as novel C-glucosidic tannin dimer linked through (+)-catechin on the basis of spectral and chemical evidence. The inhibitory effect on activation of the Epstein-Barr virus early antigen was assessed for cowaniin. Six known polyphenols and related compounds, including a nitrile glucoside, purshianin, were also characterized.     

Formation of metallic Ni nanoparticles on titania surfaces by chemical vapor reductive deposition method

Metallic Ni nanoparticles were successfully prepared on the surface of titania thin film substrate by a novel method, named as chemical vapor reductive deposition (CVRD) method. The growth of the nanoparticles was based on the specific adsorption and heterogeneous nucleation on the surface of substrate, not via vapor-phase formation and subsequent sedimentation. The nanoparticle size was found to be well controllable between 10 and 30 nm by the preparation time and vapor pressure of metal complex precursor. ESCA and electron diffraction results clearly demonstrated Ni nanoparticles as metallic. Titania thin film with metallic Ni nanoparticles on its surface showed high efficiency in their photocatalysis of hydrogen evolution from decomposition of ethanol.     

Structure and dewetting behavior of polyhedral oligomeric silsesquioxane-filled polystyrene thin films

Polyhedral oligomeric silsesquioxane (POSS) meets increasing interest as a building unit for inorganic-organic hybrid materials. The incorporation of cyclopentyl-substituted POSS (CpPOSS) into polystyrene (PS) thin films led to an inhibition of dewetting. In this paper, the dispersion state of CpPOSS in the CpPOSS/PS hybrid films and, furthermore, the relationships between the structure and dewetting inhibition effect are discussed. Structural analysis of the hybrid films revealed that CpPOSS segregated to the film surface and crystallized. The segregation of CpPOSS to the surface changes the surface free energy and spreading coefficient of the film. Interfacial structure was also roughened by the segregation of CpPOSS, which can contribute to the inhibition of dewetting by pinning the contact line of the PS film with the substrate. The inhibition of dewetting can be attributed to the modification of the film surface and interface by the segregation of CpPOSS.     

Anti-babesial compounds from Curcuma xanthorrhiza

Anti-babesial ingredients, (12R)- and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizols, were isolated from Curcuma xanthorrhiza. The structures were established by the extensive NMR techniques. The assignments of (1)H NMR data of (12R)-12,13-dihydro-12,13-dihydroxyxanthorrhizol was revised, and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizol was isolated as a pure form for the first time. The IC(50) of the active compounds were compared with that of commercial drug, diminazene aceturate (Ganaseg). IC(50) values of Ganaseg, (12R)-, and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizols were 0.6 microg mL(-1), 8.3 microg mL(-1) and 11.6 microg mL(-1), respectively.