Influence of shell strength on shape transformation of micron-sized,monodisperse, hollow polymer particles

Micron-sized, monodisperse, non-spherical polymer particles with "rugby ball" and "red blood corpuscle"-like shapes were produced by seeded polymerization of the dispersion of (divinylbenzene/vinylbiphenyl/xylene)-swollen polystyrene particles prepared by utilizing the dynamic swelling method which the authors proposed in 1991. Their non-spherical shapes were based on buckling of the shell of the resultant hollow particles. In this article, the reversible shape transformation of the hollow composite polymer particle between spherical and such non-spherical shapes was studied in detail by controlling the shell strength. A part of the shell was buckled by external pressure which was caused by evaporation of xylene from the hollow when the shell had the tensile modulus below the critical value calculated from the pressure-buckling relationship of a spherical shell proposed by Uemura. The plasticization of the shell by a good solvent was one of key factors for the shape transformation.     

Regiospecific cycloaddition reactions using functionalized isoprenylsilane and related compounds

1-Alkoxy-3-trimethylsilylmethyl- and 1-alkoxy-3-trimethylsilyl-l,3-butadienes ($\text{1}$) were newly prepared. The cycloaddition reactions of $\text{1}$ with various dienophiles including heterodienophiles were found to proceed very smoothly in a perfectly regiospecific mode.     

Phase separation in the formation of hollow particles by suspension polymerization for divinylbenzene/toluene droplets dissolving polystyrene

Phase-separation behavior within polymerizing divinylbenzene/toluene droplet dissolving polystyrenes (PS) was investigated to clarify the formation mechanism of the hollow polymer particles by suspension polymerization. No hollow particles were obtained at a low content of low-molecular-weight PS where phase separation occurred at high conversion. On the other hand, hollow particles were obtained at a high content of high-molecular-weight PS where phase separation occurred at low conversion. The phase separation in an early stage of the polymerization, which was promoted by the presence of PS and cross-links of polydivinylbenzene, was a key factor for the formation of the hollow structure.     

Asymmetric synthesis of 2-substituted-3-aminocarbonyl propionic acid

An asymmetric synthetic route to 2-substituted-3-aminocarbonyl propionic acid, which is the significant component of low-molecular-weight renin inhibitors, is described. The key step of this synthesis is diastereoselective alkylation by using chiral oxazolidinone and benzyl bromoacetate.     

10B quantitative determination in ppb range by particle tracks reading for boron neutron capture therapy

Quantitative determination of ppb-order ¹⁰B was carried out in a small number of cultured tumor cells by particle tracks by the ₁₀B(n,)⁷Li reactions using solid state nuclear track detector (SSNTD) for boron neutron capture therapy research. The detection limit of ¹⁰B concentration in tumor cells is less than 1·10^-3 ppm under our experimental conditions which permits the quantitative determination of ¹⁰B in a small number of boronated tumor cells (10⁵/ml = ca. 0.1 mg). Boron quantities in tumor cells determined were well compatible with the tumor cell killing effects of boron neutron capture therapy.     

A novel solvent dipole-induced rotational isomerism of 1-hxdroxy-2-pyridone in the excited singlet state

The title compound shows dual fluorescence depending on polarity of the solvent used. The fluorescence in the nonpolar solvent, cyclohexane, has a maximuni at 370 nm, while the fluorescence in the polar solvent, methanol, has a maximum at 400nm. The short and long wavelength fluorescences were assigned to the syn and anti conformers, respectively. From these observations one is allowed to conclude that a novel solvent dipole-induced rotational isomerism takes place in the excited singlet state.     

Production of polyacrylonitrile particles by precipitation polymerization in supercritical carbon dioxide

Polyacrylonitrile particles were produced by precipitation polymerization of acrylonitrile (AN) without any colloidal stabilizer in supercritical carbon dioxide as a polymerization medium at about 30 MPa for 24 h at 65 °C at different initiator concentrations (0.8–45.2 mmol/l) and at different AN concentrations (10–40% w/v). An increase in the initiator concentration led to increases in the conversion and in the degree of coagulation and to a decrease in the molecular weight. At AN concentration of 20% w/v, micron-sized, relatively monodisperse polyacrylonitrile particles with clean and uneven surfaces were produced.     

Syntheses and biological activities of renin inhibitors containing statine analogues

Syntheses and biological activities of dipeptide renin inhibitors that contain statine analogues are described. The key steps of the synthetic approach to dipeptide renin inhibitors are the asymmetric synthesis of 2(R)-substituted-3-aminocarbonylpropionic acids and the diastereoselective syntheses of (3S,4S)-statine analogues. These inhibitors (2,14-40) inhibited human renin in the 3-140 nM range. Inhibitor ES 6864 (2) was found to be a highly potent inhibitor of human renin (IC50: 4.6 x 10(-9) M) and showed high enzyme specificity. Oral administration of ES 6864 at 3 mg/kg to conscious, sodium-depleted marmosets inhibited plasma renin activity (PRA) more than 80% after 1 h.