The Dynamic Behaviour and NMR Solution structures of complexes of the type (Bisphosphine)(cycloocta-1,5-diene)iridium(I) and the X-ray crystal structure of (cycloocta-1,5-diene)((−)-norphos)iridium(I) hexafluorophosphate

A square-planar coordination geometry was found for the complex [Ir(cod){(?)-norphos}][PF₆] ( 1b [PF₆]; cod = cylcoocta-1,5-diene and (?)-norphos = [(2R,3R)-8-9-10-trinorborn-5-ene-2,3-diyl]bis(diphenylphosphine)) in the solid state by X-ray diffraction. Crystal data: monoclinic, space group P2₁, a = 10.751 (6), b = 18.669(14), c = 12.037(8) Å, β = 114.82(5)°, Z = 2. A total structural assignment including the configurational and conformational aspects of this and the related compounds [Ir(bishosphine)(cod)]X (bisphosphine = (?)-chiraphos = (2S,3S)-2,3-bis(diphenylphosphino)butane and (?)-norphos, X = Cl, CF₃SO₃, or PF₆) was carried out in solution by one- and two-dimensional NMR spectroscopy. The complexes containing the CF₃SO₃^? and PF₆^? anions are four-coordinate cations with square-planar geometry, whereas the chlorides are five-coordinate neutral compounds showing solvent-dependent dynamic behaviour. In toluene, two diastereoisomers of [IrCl(cod){(?)-norphos}] ( 2b ) exist and interconvert slowly at room temperature. This interchange is fast in CDCl₃ solution, and it is likely to involve Cl dissociation and the formation of the cation [Ir(cod){(?)-norphos}]⁺ as an intermediate.     

4,4-Disubstituierte Imidazol-Derivate aus der Umsetzung von 3-Amino-2H-azirinen mit Salicylamid

4,4-Disubstituted Imidazole Derivatives from the Reaction of 3-Amino-2H-azirines with Salicylamide Reaction of 3-amino-2H-azirines 1a–c with salicylamide ( 7 ) in MeCN leads to imidazoles 10 and 11 in different rates, depending on the conditions. In the case of 1a and 1b, 11a and 11b , respectively, have been obtained as the main product at 50°; in reactions at 80°, 10a and 10b are the favored products (Tables 1 and 2). 2,2-Dimethyl-3-(N-methyl-N-phenylamino)-2H-azirine ( 1c ) reacts with 7 in MeCN mainly to 2-(2-hydroxyphenyl)-5,5-dimethyl-3,5-dihydroimidazol-4-one ( 10a ); in boiling toluene, 11c is formed with low preference (Table 3). The structure of the products has been established by spectroscopic means, and in the case of 10b and 11c , by X-ray crystallography. Two different reaction mechanisms for the formation of the products are discussed (Scheme 2).     

The gas phase structure of tetrakis(trifluoromethylthio)ethene, CF3S)2C=C(SCF3)2

The geometric structure of (CF₃S)₂C=C(SCF₃)₂ in the vapour phase was determined by electron diffraction. The molecule possesses D₂ symmetry with the S---CF₃ bonds oriented perpendicular to the ethene plane, in alternating directions up-down-up-down. The following skeletal geometric parameters were obtained (r_a distances and angles, experimental uncertainties are 3σ values): C=C = 1.34Å (ass.), C(sp²---S = 1.761(5)Å, S---C(sp³) = 1.832(5)Å, S---C---C = 119.6(4)°, C---S---C = 100.6(13)°, and ø(C=C---S---C) = 90.9(11)°. The gas phase conformation differs considerably from the crystal structure, where the molecule possesses C_i symmetry and the CF₃ groups, which are bonded to cis-standing sulfur atoms, lie on the same side of the ethene plane with dihedral angles ø(C=C---S---C) of 117° and 127°.     

Studies on the elimination of sulfide interference in the potentiometric determination of chloride using ion selective electrodes in a flow injection system

Detailed investigations have been reported on the application of a common procedure using bromate in nitric acid for the removal of the interference of sulfide in the direct potentiometric determination of chloride using silver-based ion selective electrodes in a flow injection system. It is shown that this procedure is not very efficient and carries a high risk of chloride underestimation. With increasing levels of sulfide the oxidation of chloride to elemental chlorine becomes progressively significant and under certain circumstances virtually no chloride is left irrespective of its initial concentration. Hydrogen peroxide in alkaline medium is proposed as a suitable alternative for the efficient removal of sulfide without any adverse effects on the potentiometric method.     

Diazo-Transfer Reaction with Diphenyl Phosphorazidate

Diphenyl phosphorazidate (DPPA) was used as the azide source in a one-pot synthesis of 2,2-disubstituted 3-amino-2H-azirines 1 (Scheme 1). The reaction with lithium enolates of amides of type 2 , bearing two substituents at C(2), proceeded smoothly in THF at 0°; keteniminium azides C and azidoenamines D are likely intermediates. Under analogous reaction conditions, DPPA and amides of type 3 with only one substituent at C(2) gave 2-diazoamides 5 in fair-to-good yield (Scheme 2). The corresponding 2-diazo derivatives 6–8 were formed in low yield by treatment of the lithium enolates of N,N-dimethyl-2-phenylacetamide, methyl 2-phenylacetate, and benzyl phenyl ketone, respectively, with DPPA. Thermolysis of 2-diazo-N-methyl-N-phenylcarboxamides 5a and 5b yielded 3-substituted 1,3-dihydro-N-methyl-2H-indol-2-ones 9a and 9b , respectively (Scheme 3). The diazo compounds 5–8 reacted with 1,3-thiazole-5 (4H)-thiones 10 and thiobenzophenone ( 13 ) to give 6-oxa-1,9-dithia-3-azaspiro[4.4]nona-2,7-dienes 11 (Scheme 4) and thiirane-2-carboxylic acid derivatives 14 (Scheme 5), respectively. In analogy to previously described reactions, a mechanism via 1,3-dipolar cycloaddition, leading to 2,5-dihydro-1,3,4-thiadiazoles, and elimination of N₂ to give the ‘thiocarbonyl ylides’ of type H or K is proposed. These dipolar intermediates with a conjugated C?O group then undergo either a 1,5-dipolar electrocyclization to give spirohetrocycles 11 or a 1,3-dipolar electrocyclization to thiiranes 14 .     

Trifluoroethylene Sultone: Structure and Chemistry

The gas phase structure of trifluoroethylene sultone, ( 1 ) (3,4,4-trifluoro-1,2-oxathietane-2,2-dioxide) was determined by gas electron diffraction, and the four-membered ring was found to be planar. The following ring parameters (r_a distances and ∠_α angles with 3σ uncertainties) were derived in the electron diffraction analysis: C? O = 1.41 Å (ass.), C? C = 1.541(18) Å, S? O = 1.652(5) Å, S? C = 1.822(8) Å, S? C? C = 86.2(15)°, C? C? O = 97.1(28)°, C? O? S = 97.5(21)°, and O? S? C = 79.1(8)°. New spectral data (IR, NMR) of 1 , its acyclic isomer FSO₂CFHC(O)F ( 2 ), and the related anhydride, FSO₂OSO₂CFHC(O)F ( 3 ), are reported. New esters containing the fluorosulfonyl function, FSO₂CFHC(O)OCH₂CF₃ ( 4 ), FSO₂CFHC(O)OCH₂CH = CH₂ ( 5 ), and (FSO₂CFHC(O)OCH₂CH? CH₂? )_n ( 6 ) have been prepared and characterized.     

Upper- and lower-bound Hylleraas–CI calculations for the nonrelativistic Po states of the 4He isotope

Extensive Hylleraas–CI calculations for the lowest P^o states of ⁴He were performed. The dependence of the variational energy values E_κ on the mass parameter κ given by κ=m/m is discussed. Furthermore, lower bounds to E_κ were calculated using variance minimization. © 1998 John Wiley & Sons, Inc. Int J Quant Chem 66 : 25–30, 1998