Thermodynamics of Ion-Association of NaClO4 in Aqueous-Methanol and Aqueous-Glycerol Using Conductance Measurements

The conductance of NaClO₄ at (25–45)°C in methanol-H₂O, and glycerol-H₂O mixtures in a concentration range up to 10^?2 M has been measured. The association constant, K_A, values have been determined, where the conductometric data were analysed by a M S X computer using the Fuoss-Aprano method. The K_A values for NaClO₄ in methanol-H₂O are higher than in glycerel-H₂O mixtures, Also K_A values increase as the proportional of methanol or glycerol increases in mixture. The thermodynamic parameters ΔH°, ΔG°, and ΔS° were also calculated. It is obvious that the entire process of the ionic association in those systems are endothermic ones. The Walden products, Λ_oη were calculated for all systems investigated.     

Nitrogen doped nano porous graphene as a sorbent for separation and preconcentration trace amounts of Pb,Cd and Cr by Ultrasonic assisted in‐syringe dispersive micro solid phase extraction

Nitrogen doped nano porous graphene was used as an efficient sorbent in solid‐phase extraction process for simultaneous separation and pre‐concentration of metal ions lead (II), cadmium(II), and chromium(III)) in biological samples. Ultrasonic assisted in‐syringe dispersive micro solid phase extraction coupled with micro sampling atomic absorption spectrometry was utilized for the determination of metal ions. Nitrogen doped nano porous graphene was synthesized as a nano sorbent by chemical vapour deposition method. Methane and aniline were used as carbon and nitrogen sources. The characterization of sorbent was performed by field emission scanning electron microscope, transmission electron microscopy, atomic force microscope, fourier transform infrared, chemical element analysis and raman analysis. Effective parameters on the extraction efficiency such as pH, sorbent dosage, eluent volume and eluent concentration were optimized by central composite design and desirability function. Experimental results indicate that the optimal conditions for this extraction were pH = 6.4, 1.42 mg of sorbent, 100 μL of eluent, and 0.84 mol L^‐1 of eluent concentration. The detection limits are as low as 1.5, 0.3 and 0.9 μg L^‐1 for lead, cadmium, and chromium, respectively. The intra‐day precisions were 3.6, 4.38 and 2.94 and Inter‐day precision were 4.83, 5.26 and 4.52 for lead, cadmium, and chromium, respectively. Method performance was investigated by determination of mentioned heavy metals in complicated biological matrixes such as human plasma, urine and saliva samples with good recoveries.     

Two-Fluid Dark Energy Models in Bianchi Type-III Universe with Variable Deceleration Parameter

Some new exact solutions of Einstein’s field equations have come forth within the scope of a spatially homogeneous and anisotropic Bianchi type-III space-time filled with barotropic fluid and dark energy by considering a variable deceleration parameter. We consider the case when the dark energy is minimally coupled to the perfect fluid as well as direct interaction with it. Under the suitable condition, the anisotropic models approach to isotropic scenario. We also find that during the evolution of the universe, the equation of state (EoS) for dark energy ω ^(de), in both cases, tends to ?1 (cosmological constant, ω ^(de)=?1), by displaying various patterns as time increases, which is consistent with recent observations. The cosmic jerk parameter in our derived models are in good agreement with the recent data of astrophysical observations under appropriate condition. It is observed that the universe starts from an asymptotic Einstein static era and reaches to the ΛCDM model. So from recently developed Statefinder parameters, the behaviour of different stages of the universe has been studied. The physical and geometric properties of cosmological models are also discussed.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

A hyperbranched polyamidoamine dendrimer grafted onto magnetized graphene oxide as a sorbent for the extraction of synthetic dyes from foodstuff

Microchimica Acta - Graphene oxide nanosheets were modified with magnetite nanoparticles, and a hyperbranched polyamidoamine dendrimer was then covalently attached to their surface. The resulting...     

Preparation of Silica-Bonded S-Sulfonic Acid: A Recyclable Catalyst for the Synthesis of Bis-Indolylmethanes

Silica bonded S-sulfonic acid (SBSSA) was prepared by the reaction of 3-mercaptopropylsilica (MPS) and chlorosulfonic acid in chloroform. Silica-bonded S-sulfonic acid, as a reusable solid acid catalyst, was used for the condensation reactions of indole with carbonyl compounds at ambient temperature. Tetra-(indolyl)methanes were also obtained by the condensation reaction of indole with dialdehyde compounds. Silica bonded S-sulfonic acid was recovered and reused.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Electrical Conductance of Fast Extrusion Furnace Carbon Black-Loaded Styrene-Butadiene Rubber during Swelling in Kerosene

The effect of swelling in kerosene on the electrical conductance of 60, 80, and 100 part per hundred parts of rubber by weight of Fast Extrusion Furnace (FEF) carbon black-loaded styrene-butadiene rubber (SBR, 1502) was studied. It was found that there is a characteristic time of swelling after which a sudden decrease in conductivity appears. An ideal and simple model is suggested to calculate the carbon-carbon interspacing distance, D, in the carbon/rubber matrix. The dependence of D on the swelling time is also discussed.     

A Facile One-Pot Synthesis of Highly-Functionalized Stable Heterocyclic Phosphorus Ylides in Aqueous Media

Phthalimide or succinimide undergo a reaction with dialkyl acetylenedicarboxylates and triphenylphosphine to produce highly-functionalized stable heterocyclic phosphorus ylides in good yields in water-tetrahydrofuran (6:1). This methodology is of interest because of the use of water as solvent, thus minimizing the cost, operational hazards, and environmental pollution.     

Solvent Free Synthesis of Coumarins

An efficient synthesis of 3-substituted coumarins under solventless system is described.