How Many Methanol Molecules Can Solvate a Glycine: a PBE1PBE Approach

Microsolvation of glycine in methanol clusters is explored by the use of DFT calculation method. The lowest energy conformations within 16.72 kJ·mol-1 of the glycine clustering with one to six methanol molecules, which are obtained at the B3LYP/6-31+G(d) level of theory, are reoptimized at PBE1PBE/6-311+G(d,p). The calculated results agree with our previous results with B3LYP (Chin. J. Chem. Phys. 22 (2009) 577) that the clusters of two forms (Z-and N-form) tend to be isoenergetic when the number of the solvate molecules reaches six. Furthermore, this result is in good agreement with the experiment of the tryptophan-methanol clusters, implying that the present treatments are reasonable and reliable. The results also indicate that nine methanol molecules are not enough to fully solvate a glycine molecule, and a tentative estimation is obtained that ten methanol molecules may fully solvate a glycine molecule, which consists with the experiment results.     

One‐pot synthesis of hyperbranched glycopolymers by RAFT polymerization

Soluble hyperbranched glycopolymers were prepared by copolymerization of glycan monomers with reversible addition‐fragmentation chain transfer polymerization (RAFT) inimers in a simple one‐pot reaction. Two novel RAFT inimers, 2‐(methacryloyloxy)ethyl 4‐cyano‐4‐(phenylcarbonothioylthio)pentanoate (MAE‐CPP) and 2‐(3‐(benzylthiocarbonothioylthio)propanoyloxy)ethyl acrylate (BCP‐EA) were synthesized and used to prepare hyperbranched glycopolymers. Two types of galactose‐based saccharide monomers, 6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐M) and 6‐O‐(2′‐acrylamido‐2′‐methylpropanoate)‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐A), containing a methacrylate and an acrylamide group, respectively, were also synthesized and polymerized under the mediation of the MAE‐CPP and BCP‐EA inimers, respectively. In addition, hyperbranched poly(proGal‐M), linear poly(proGal‐A), and hyperbranched poly(proGal‐A) were generated and their polymerization kinetics were studied and compared. An unexpected difference was observed in the kinetics between the two monomers during polymerization: the relationship between polymerization rate and concentration of inimer was totally opposite in the two monomer–inimer systems. Branching analysis was conducted by using degree of branching (DB) as the measurement parameter. As expected, a higher DB occurred with increased inimer content. Furthermore, these polymers were readily deprotected by hydrolysis in trifluoroacetic acid solution resulting in water‐soluble polymers. The resulting branched glycopolymers have potential as biomimetics of polysaccharides. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Electroluminescent block copolymers containing oxadiazole and thiophene via ATRP

Block copolymers containing thiophene units in one block and oxadiazole (OXD) units in the other were prepared. Atom transfer radical polymerization method was used to obtain the thiophene‐containing mesogen‐jacketed polymers, and the kinetic study indicated that the polymerization was controllable and the polymers could be used to initiate the polymerization of the OXD‐containing monomers. Photoluminescent spectra indicated that the fluorescence quantum yields of the polymers increased with increasing content of OXD. And, more OXD domains, that is, more interfaces between the hole‐transport parts and electron‐transport parts, resulting in the higher probability of exciplex formation. The electroluminescent devices containing the block copolymer with 64 mol % OXD as the emissive layer had a maximum brightness of 127 cd/m² and an extremely low onset voltage of 7.7 V, which indicated that the injection and transport of charge carriers were facilitated and the number of charge carriers was sufficiently high in early time after the voltage was turned on. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Solvent‐induced crystallization in poly(ethylene terephthalate) during mass transport

Solvent transport in poly(ethylene terephthalate) (PET) and related phase transformation were investigated. The data of mass sorption were analyzed according to Harmon's model for Case I (Fickian), Case II (swelling), and anomalous transport. This transport process in PET is accompanied by the induced crystallization of the original amorphous state. The transformation was examined by wide‐angle X‐ray scattering, small‐angle X‐ray scattering, differential scanning calorimetry, and Fourier transform infrared spectroscopy. During this process, the matrix is under a strain state that causes different kinetic paths of crystallization as compared with that by thermal annealing. This state of strain assists the development of the solvent‐induced crystallization. The model regarding crystallization was proposed in terms of the study of long period L, the crystal thickness l_c, and the thickness of amorphous layer l_a obtained from the one‐dimensional correlation function and interface distribution function. Different kinetic paths were discovered for different crystallization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1444–1453, 2002     

ADVANCES IN MICROEMULSION PHASE ON SELF-ASSEMBLY AND MICELLE EXTRACTION WITH BLOCK COPOLYMERS

In this paper we review our work on self-assembly of the system, poly（ethylene oxide）-poly（propylene oxide）-poly（elhylene oxide） （PEO-PPO-PEO） block copolymers, which is a kind of macromolecular complex fluids. The control of self-assembly could be obtained by adding inorganic salts or aliphatic alcohols. By self-assembly of amphiphilic block copelymers a microemulsion phase is formed which could be applied in micelle extraction, such as hollow-fiber membrane micelle extraction, magnetic micelle extraction and immobilized micelle extraction.     

平面应变条件下孔洞化不稳定性问题研究

考虑平面应变条件下，由一类推广的幂次neo—Hookean材料组成的内部分布温度场的圆柱体在轴向和径向载荷作用下的孔洞化不稳定性问题，研究中发现当材料参数满足一定的条件时，存在着一个载荷临界值，当外加载荷大于该临界值时，圆柱体中心将出现一个圆柱形的孔洞，即发生了孔洞化不稳定性现象并详细讨论了温度和材料参数对孔洞化极限载荷的影响。     

随机规划中的一些逼近结果

主要讨论了一类随机规划的目标函数分别在概率测度序列分布收敛、函数序列上图收敛以及随机变量序列均方可积收敛等收敛意义下目标函数序列的收敛情况。基于上述收敛情况给出了一些逼近思想，这些思想可应用于求解这类随机规划问题。     

Microemulsion copolymerization of styrene and acrylonitrile with n‐butanol as the cosurfactant

The microemulsion copolymerization of styrene and acrylonitrile in an n‐butanol/cetyltrimethylammonium bromide/oil/water microemulsion system was studied. The solubilization sites of the two monomers were determined with an NMR technique. The results showed that the solubilization behaviors of the two monomers were quite different. Most of the styrene was solubilized in the palisade layer of the microemulsion, whereas the acrylonitrile had an equilibrium distribution in the aqueous phase and palisade layer of the microemulsion. The reactivity ratios of styrene and acrylonitrile in the microemulsion system were different from those in other media. The effect of the monomer feed composition on the copolymerization kinetics was investigated, and the mechanism of nucleation of the latex particles was examined. The experimental results showed that the copolymerization loci were changed from the microemulsion droplets to the aqueous phase when the concentration of acrylonitrile in the monomer feed reached approximately 80%; this could be further proved by the effect of the monomer feed composition on the copolymerization kinetics. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 203–216, 2005     

Construction of different supramolecular polymer systems by combining the host–guest and hydrogen‐bonding interactions

Poly(ethylene glycol) (PEG) can form either the inclusion complex with α‐cyclodextrins (α‐CDs) through host–guest interactions or the interpolymer complex with poly(acrylic acid) (PAA) through hydrogen‐bonding interaction. Mixing α‐CD, PEG, and PAA ternary components in an aqueous solution, the competition between host–guest and hydrogen‐bonding interactions occurs. Increasing feed ratio of α‐CD:EG:AA from 0:1:1 to 0.2:1:1 (molar ratio), various interesting supramolecular polymer systems, such as hydrogen‐bonding complex, dynamic polyrotaxane, crystalline inclusion complex, and thermoresponsive hydrogel, are successively obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1114–1120, 2008