Actively mode-locked dual-wavelength fiber laser with close wavelength spacing using a fiber Bragg grating

A simple actively mode-locked fiber ring laser is proposed and successfully demonstrated to generate dual-wavelength picosecond pulses with close wavelength spacing using one Bragg grating in standard single-mode fiber. The proposed laser can be made to operate in stable dual-wavelength at room temperature, due to the birefringence characteristic of the FBG induced by transverse strain. Transverse strain loading on the FBG allows the wavelength spacing to be controlled. Generation of stable dual-wavelength pulses with a pulsewidth of 212–234 ps and a tunable wavelength separation from 0.2 to 0.44 nm at a pulse rate of 1.05 GHz was demonstrated.     

The Matsumoto-Yor property and the structure of the Wishart distribution

This paper establishes a link between a generalized matrix Matsumoto-Yor (MY) property and the Wishart distribution. This link highlights certain conditional independence properties within blocks of the Wishart and leads to a new characterization of the Wishart distribution similar to the one recently obtained by Geiger and Heckerman but involving independences for only three pairs of block partitionings of the random matrix.In the process, we obtain two other main results. The first one is an extension of the MY independence property to random matrices of different dimensions. The second result is its converse. It extends previous characterizations of the matrix generalized inverse Gaussian and Wishart seen as a couple of distributions.We present two proofs for the generalized MY property. The first proof relies on a new version of Herz's identity for Bessel functions of matrix arguments. The second proof uses a representation of the MY property through the structure of the Wishart.     

Simulation and fabrication of carbon nanotubes field emission pressure sensors

A novel field emission pressure sensor has been achieved utilizing carbon nanotubes (CNTs) as the electron source. The sensor consists of the anode sensing film fabricated by wet etching process and multi-wall carbon nanotubes (MWNTs) cathode in the micro-vacuum chamber. MWNTs on the silicon substrate were grown by thermal CVD. The prototype pressure sensor has a measured sensitivity of about 0.17-0.77 nA/Pa (101-550 KPa). The work shows the potential use of CNTs-based field-emitter in microsensors, such as accelerometers and tactile sensors.     

Periodic solutions of second-order differential inclusions systems with p-Laplacian

Some existence results are obtained for periodic solutions of nonautonomous second-order differential inclusions systems with p-Laplacian.     

准Λ型四能级系统中的超窄谱线的研究

在一般Λ型三能级模型的基础上提出准Λ型四能级系统,并对准Λ型四能级模型的共振荧光谱作了详尽的研究.从上能级向两边下能级辐射的自发辐射谱中产生了三个超窄谱线,且在很大参数范围内光谱具有这一特性.三个超窄谱线的产生是和两个相干驱动场的Rabi频率密切相关,在较大的Rabi频率作用下谱线会变得更窄,而当只有一个驱动场作用时是不会产生谱线变窄效应的.能级间的碰撞弛豫和非相干激发严重地破坏了谱线变窄.这种超窄谱线效应是多通道量子干涉的结果 关键词： 准Λ型四能级系统 超窄谱线 多通道量子干涉     

Experimental identification of physical parameters of fluid-filled pipes using acoustical signal processing

A method is formulated for the identification of an unknown physical parameter of a fluid-filled pipe using the measurement of sound speed in the pipe. The method uses a simple formula which provides the relationship between the sound speed and a few physical parameters of the pipe: thickness, diameter, wall material constants and fluid constants. Once the sound speed in the pipe is measured, the simple formula can be used to extract one of the unknown parameters providing the remaining ones are known.The sound speed in the pipe is measured using a 3-transducer array. In order to demonstrate the potential of the technique the results of several measurements obtained in a water-filled steel pipe are presented.The required accuracy of the measurement of sound speed and of the specification of known parameters is analysed. The accuracy depends on the unknown parameter which is to be identified. For example, if the pipe thickness is the unknown parameter, the other parameters have to be known within a very narrow margin of error. On the contrary, if the fluid properties have to be identified the needed accuracy of known parameters gets much lower.     

双面电弧焊接的传热模型

将等离子焊接(PAW)电弧和钨极氩弧焊(TIG)电弧串接,相对作用于工件的正反面形成双面电弧焊接(DSAW)系统,可以引导焊接电流沿工件厚度方向流过小孔,补偿等离子电弧穿透工件时消耗的能量,以有效地提高等离子弧的穿透能力.综合考虑影响双面电弧焊接正反面熔池几何形状的力学因素,建立了熔池表面变形的控制方程,以此为基础并采用帖体曲线坐标系建立了DSAW焊接传热的数学模型,分析了DSAW,PAW焊接传热的差异,从传热的角度解释了DSAW焊接熔深增加的原因.焊接工艺实验表明,计算结果与实测结果吻合良好. 关键词： 双面电弧焊接(DSAW) 传热模型 熔池表面变形模型     

On-line arbitrarily vertex decomposable trees

A tree T is arbitrarily vertex decomposable if for any sequence τ of positive integers adding up to the order of T there is a sequence of vertex-disjoint subtrees of T whose orders are given by τ. An on-line version of the problem of characterizing arbitrarily vertex decomposable trees is completely solved here.     

Formation of functional groups on graphite during oxygen plasma treatment

Improved sample wettability was obtained by oxygen plasma functionalization of pyrolytic graphite. The samples were exposed to highly dissociated oxygen plasma with the density of 1 × 10¹⁶ m⁻³, the electron temperature of about 5.5 eV and the density of neutral oxygen atoms of 8 × 10²¹ m⁻³ for 20 s. The surface wettability was measured by a contact angle of water drop. The contact angle dropped from original 112° down to about 1°. The functional groups were detected by XPS analyses. The survey spectrum showed a substantial increase of oxygen concentration on the surface, while high-resolution analyses showed additional oxygen was bonded onto the graphite surface in the form of C-O polar functional group responsible for the increase of the surface energy.