Microwave synthesis,characterization and catalytic properties of titanium-incorporated ZSM-5 zeolite

Titanium-incorporated ZSM-5 zeolites (Si/Al = 50–200 and Si/Ti = 70) were successfully synthesized in a one-step sol-gel process under microwave irradiation. The characteristics of Ti-ZSM-5 zeolites were investigated using X-ray power diffraction, UV/Vis-DRS, FT-IR spectroscopy and solid-state ²⁷Al-NMR to monitor the physico-chemical properties. Simultaneously, the acidic properties were characterized by the NH₃-TPD profile. The characterization results revealed that the Ti⁴⁺ and Al³⁺ ions were well incorporated into the framework of Ti-ZSM-5 zeolite. The prepared zeolite was moderately active but selective in the dehydration of methanol to dimethyl ether.     

Structural basis for inhibition of protein tyrosine phosphatases by Keggin compounds phosphomolybdate and phosphotungstate

Protein-tyrosine phosphatases (PTPs) constitute a family of receptor-like, and cytoplasmic enzymes, which catalyze the dephosphorylation of phosphotyrosine residues in a variety of receptors and signaling molecules. Together with protein tyrosine kinases (PTKs), PTPs are critically involved in regulating many cellular signaling processes. In this study, diverse compounds were screened for PTP inhibition and selectively screened for inhibitors with the end product inhibition properties. Among phosphate analogues and their derivatives for PTP inhibition, Keggin compounds phosphomolybdate (PM) and phosphotungstate (PT) strongly inhibited both PTP-1B and SHP-1, with K(i) values of 0.06-1.2 micromM in the presence of EDTA. Unlike the vanadium compounds, inhibition potencies of PM and PT were not significantly affected by EDTA. PM and PT were potent, competitive inhibitors for PTPs, but relatively poor inhibitors of Ser/Thr phosphatase. Interestingly, PM and PT did not inhibit alkaline phosphatase at all. The crystal structure of PTP-1B in complex with PM, at 2.0 A resolution, reveals that MoO(3), derived from PM by hydrolysis, binds at the active site. The molybdenium atom of the inhibitor is coordinated with six ligands: three oxo-ligands, two apical water molecules and a S atom of the catalytic cysteine residue. In support of the crystallographic finding, we observed that molybdenium oxides (MoO(3), MoO(2), and MoO(2)Cl(2)) inhibited PTP-1B with IC(50) in the range 5-15 micromM.     

Visible light active platinum-ion-doped TiO2 photocatalyst

Platinum-ion-doped TiO2 (Pt(ion)-TiO2) was synthesized by a sol-gel method, and its visible light photocatalytic activities were successfully demonstrated for the oxidative and reductive degradation of chlorinated organic compounds. Pt(ion)-TiO2 exhibited a yellow-brown color, and its band gap was lower than that of undoped TiO2 by about 0.2 eV. The flat band potential of Pt(ion)-TiO2 was positively shifted by 50 mV compared with that of undoped TiO2. X-ray absorption spectroscopy and X-ray photoelectron spectroscopy analyses showed that the Pt ions substituted in the TiO2 lattice were present mainly in the Pt(IV) state with some Pt(II) on the sample surface. Pt(ion)-TiO2 exhibited higher photocatalytic activities than undoped TiO2 under UV irradiation as well. The visible light activity of Pt(ion)-TiO2 was strongly affected by the calcination temperature and the concentration of Pt ion dopant, which were optimal at 673 K and 0.5 atom %, respectively. Under visible irradiation, Pt(ion)-TiO2 degraded dichloroacetate and 4-chlorophenol through an oxidative path and trichloroacetate via a reductive path. The activity of Pt(ion)-TiO2 was not reduced when used repeatedly under visible light. However, visible-light-illuminated Pt(ion)-TiO2 could not degrade substrates such as tetramethylammonium and trichloroethylene, which are degraded with UV-illuminated TiO2. The characteristics and reactivities of Pt(ion)-TiO2 as a new visible light photocatalyst were investigated in various ways and discussed in detail.     

Fast visible dye staining of proteins in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gels compatible with matrix assisted laser desorption/ionization-mass spectrometry

A fast and matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS) compatible protein staining method in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis (1- and 2-D SDS-PAGE) is described. It is based on the counterion dye staining method that employs oppositely charged two dyes, zincon (ZC) and ethyl violet (EV) to form an ion-pair complex. The protocol, including fixing, staining and quick washing steps, can be completed in 1-1.5 h depending upon gel thickness. It has a sensitivity of 4-8 ng, comparable to that of colloidal Coomassie Brilliant Blue G (CBBG) staining with phosphoric acid in the staining solution. The counterion dye stain does not induce protein modifications that complicate interpretation of peptide mapping data from MS. Considering the speed, sensitivity and compatibility with MS, the counterion dye stain may be more practical than any other dye-based protein stains for routine proteomic researches.     

Background-free,fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes,zincon and ethyl violet

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.     

Residual stress and deformation during rapid cooling process in an epoxy plate

Residual stress in the epoxy plate during a rapid cooling process was measured by the layer removal method and calculated by the linear thermoviscoelastic theory considering specific volume relaxation. The relaxations of the tensile modulus and specific volume were measured by an Instron thermomechanical analyzer. When the starting temperature of the cooling process was near the glass transition temperature of the cured epoxy, the residual stress in the epoxy plate was smaller than when the starting temperature was higher than the glass transition temperature. However, the transient stress in the cured epoxy plate was higher when the starting temperature was near the glass transition temperature than when the starting temperature was higher than the glass transition temperature. The quenched epoxy plate was compressed in the direction parallel to the surface and expanded in the thickness direction.     

The Studies of Lanthanide Shift Reagents in NMR Spectroscopy

The action of a series of lanthanide chelate complexes LnL₃, where Lu=La, Pr, Nd, Sm, Eu, Dy, Ho, Er and Yb; L= dbm (dibenzoylmethanato), dpm (dipivaloylmethanato), and acac acetylactonato), on nmr spectra of 2-butanol has been studied. The origin of shifting abilities and shifting sign of various lanthanide ions are explained by means of Bleaney's theory.     

Separation of 99Mo from a simulated fission product solution by precipitation with a-benzoinoxime

The formation property of Mo precipitate was investigated and improved the existing process was using H₂O₂ that acts as an interfering compound in a subsequent alumina adsorption process. The property of the Mo precipitate was investigated by using SEM, FTIR, TG-DTA, and XRD. The simulated solution consisted of 1M nitric acid containing seven elements (Mo, I, Ru, Zr, Ce, Nd, Sr) and their radioactive tracers. As a result, the precipitate was composed of the Mo precipitate and re-precipitated a-benzoinoxime which was added excessively for increasing the precipitation efficiency. It was confirmed that the Mo precipitate was formed by the reaction of two a-benzoinoxime molecules and one MoO₂ ²⁺. Molybdenum precipitate was dissolved in 0.4M NaOH solution within 5 minutes without H₂O₂. Hydrogen peroxide induced only the rapid dissolution of the a-benzoinoxime re-precipitate. Also, the dissolution method without H₂O₂ was favorable in the purification aspect because Zr and Ru were contained as a small fraction of 1.3% and 7.7%, respectively, in the dissolving solution.     

Paired Electrolysis of Aldoses in a Divided Flow Cell

Simultaneous anodic oxidation and cathodic reduction of aldoses in a divided flow cell were studied. The stream of the anolyte was an aqueous solution containing D-glucose, sodium bromide, and sodium bicarbonate. The stream of the catholyte was also an aqueous solution containing xylose and sodium sulfite. The factors which affected both the anodic and cathodic reactions were studied. The results indicate that the flow rates and temperatures of the anolyte and the catholyte, concentrations of the aldoses, pH values and the material of electrodes significantly affect both anodic and cathodic yields. The selectivities of gluconic acid in the anode and xylitol in the cathode were very high. The power consumption of paired electrolysis in the flow system was less than paired electrolysis in a batch system.