锌和锡参与下末端环氧化物的选择性烯丙基化反应

烯丙基溴和金属辛或锡成功地将末端环氧化合物1一锅法合成高烯丙基醇2和双高烯丙基醇3. 还研究了环氧化合物取代基的影响, 并提出了此烯丙基化的反应途径 .     

Cu（I）/Diamine-catalyzed Aryl-alkyne Coupling Reactions

Arylalkynes are important building blocks for the synthesis of natural products,pharmaceuticals,and artificial molecular devices1.They are often synthesized via the Pd-catalyzed Sonogashira coupling reactions between aryl halides and terminal alkynes2,3.Unfortunately,it remains difficult to apply the Sonogashira reaction to industrial scale and/or pharmaceutical synthesis,due to the high cost of Pd and the difficulty in removing the toxic Pd residues from the reaction products.Thus it is wor…     

声速法测定纤维的取向度

纤维具有声学的各向异性,声波通过纤维的速度与纤维中高分子链的取向程度有关。测定声波沿纤维轴方向的传播速度可以计算纤维的取向度α: α=1-C~2_u/C~2其中C及C_u分别为声波通过取向及无规取向纤维的速度。 实验仪器采用每秒100次的脉冲电流输至高音喇叭的音圈,纤维通过弹簧夹子与喇叭振膜的中心相耦合。脉冲电流激发喇叭振膜振动系统,使产生逐渐衰减的固有频率振动(约4000赫)。离振源200厘米处的纤维另一端有拾音器,其输出讯号接至由脉冲电压触发扫描的脉冲示波器,从示波器可以观察到从振源到拾音器的距离间声波在纤维中的传播时间,由此计算出声波通过纤维的速度。 纤维的吸湿性与所受张力不同对其力学性貭均有影响,因此研究了相对湿度与张力对纤维中声速的影响,并选择了在室温(约30℃),相对湿度为60％和在小于纤维的临界杨氏模量的作用张力下进行声速法测定纤维的取向度。 研究了不同拉伸程度单纤维样品的声波传播速度,并外推到长度拉伸比为1时作为声波通过无规取向纤维的速度。实验结果表明,尼龙6纤维的取向度经拉伸与后处理逐渐增大至80％左右。 测定了不同品种的尼龙6纤维的取向度,具有较大强度的纤维其取向度较大。     

排序集抽样下Inverse Rayleigh分布的Fisher信息量及其在参数估计中的应用

文章分别在简单随机抽样和排序集抽样下研究了Inverse Rayleigh分布中对应样本所含刻度参数θ的Fisher信息量.数值结果表示,同等样本容量的排序集样本比简单随机样本提供更多关于θ的信息.接着分别基于简单随机样本和排序集样本构造了θ的一些优良估计,并对估计结果进行了数值比较.     

硅灰石矿物发光原料中Fe2+的去除与CaSiO3∶Eu3+的光谱特性

提出了用草酸．邻菲哕啉去除硅灰石中Fe^2 的方法，研究了浸取剂的浓度、浸取时间和温度等条件对Fe^2 的去除率的影响，在最佳的浸取条件下，Fe^2 的去除率达到98．35％。在去除猝灭剂后的硅灰石矿物中，掺加适量的稀土激活剂Eu^3 ，通过高温固相法制成荧光发光材料，发光强度明显提高，接近于化学试剂合成的发光材料。     

Investigation of Isomerization of 2—Seleno—1,3,2—diazaphospholidine Derivatives

For the first time the isomerization of 1,3,2-diazaphospholidine-2-sclenide dervatives in refluxing benzene in the presence of trace water was observed. The structures of isomerized products were determined by IR, ^1H NMR,^31P NMR, elemental analysis and X-ray crystallography. The mechanism of isomerization was also proposed.     

K＋I~2→K^+＋I~2^-离子对生成反应态－态几率与 选态截面的量子散射理论研 究

本文用Miller的-矩阵变分法在Aten-Lanting-Los两态势能面上计算了K＋I~2→K^+＋I~2^-电离反应的态－态几率和选态反应截面,结果表明了低电离阈能、几率的振荡行为及振动增强效应;电离截面随碰撞能及I~2振动量子数的变化规律与实验预测相吻合;讨论了反应机理。     

An open chain product in the reaction of benzil with thiocarbohydrazide

An open chain compound was obtained by reaction of benzil with thiocarbohy-drazide in acidic condition. Its derivative, namely, benzil bis-(5-isopropylidene-3-thiocarbohydrazone) has been structurally characterized by X-ray single crystal diffraction method. Crystallographic data: C22H26N8S2, Mr=466.62, monoclinic, space group C2/c, a=12.215(3), b=11.473(2), c=17.032 (3)A, B=98.96(2)0, V=2357.7(9)A3, Z=4, Dc=1.32 g/cm3, F(000)=1040, u(Mo Ka)=2.43 cm-1. Final R=0.050, Rw=0.061 for 1103 unique and observed reflections with I> 3o(I). The effect of the structures on the formation of the open-chain intermediates during the cyclization of (2:2) Schiff base macrocyclic compound has been discussed and a possible mechanism for the ring closure has been suggested.     

水热法制备高纯超细CeO2-ZrO2复合氧化物

Superfine composite powders of CeO₂-ZrO₂ (CZ) and CeO₂-ZrO₂-La₂O₃ (CZL) were prepared by hydrothermal method. The effects of pH、temperature and time for hydrothermal process on the performance of the resulting powders were studied. The optimized reaction parameters were on follows: the precursor′s pH≈9.0, hydrothermal temperature of 200 ℃ holding for 2 h. Thermal stable powders with average particle size smaller than 10 nm and specific surface area of 171 m²·g^-1 were obtained. A BET specific surface area was still at 44 m²·g^-1 after calcination at 1 000 ℃ for 6 hours.     

双核磺化酞菁铜(Ⅱ)催化氧化α-萘酚

本文研究了以乙醇为溶剂,CaCl_2为助催化剂,双核磺化酞菁铜(Ⅱ)催化氧化α-萘酚制备α-萘醌的各种因素。提出了可能的反应机理。