Synthesis and characterization of new oligosilane derivatives of iron and molybdenum

By use of salt elimination, the transition metal substituted oligosilanes (η⁵-C₅Me₄Et)Fe(CO)₂SiMe₂SiMe₂Cl 1, (η⁵-C₅Me₄Et)Mo(CO)₃SiMe₂SiMe₂Br 2, (η⁵-C₅Me₄Et)Fe(CO)₂(SiMe₂)₆(CO)₂Fe(η⁵-C₅Me₄Et) 3 and (η⁵-C₅Me₄Et)Fe(CO)₂(SiMe₂)₆Br 4 were prepared and characterized. Compound 1 is well crystallized from pentane and its structure has been determined by X-ray diffraction analysis.     

Solubility of gases in liquids. 18. High-precision determination of Henry fugacities for argon in liquid water at 2 to 40°C

The solubility of argon in pure liquid water was measured at ca. 100 kPa and from 2 to 40°C using an analytical method characterized by an imprecision of about ±0.05%. From the experimental results, Henry fugacities H _2,1 (T,P _s,1 ) (also known as Henry's Law constants or Henry coefficients) at the vapor pressure P _s,1 of water as well as Ostwald coefficients L _2,1 at infinite dilution were obtained. Measurements were made at roughly 0.5°C and/or 1° intervals between 2 and 8°C (region I), and at 5°C intervals above 10°C (region II). A difference plot lnH _2,1 /T suggests an unusual temperature dependence in region I, i.e., between 2 and 8°C. Because of this, the data were treated separately in two parts corresponding to these two regions. Our results are compared with the recent high-precision data of Krause and Benson (Henry fugacities), and with calorimetrically determined quantities (enthalpies and heat capacities of solution). Finally, experimental results are compared with values calculated via scaled particle theory.Communicated in part at the 2^nd International Symposium on Solubility Phenomena in Newark, New Jersey, August 12–15, 1986, and at the 4^th ISSP in Troy, New York, July 20–August 3, 1990.     

Synthesis of pyrimidines from 3-trifluoromethylsulfonyl-oxypropeniminium triflates and nitriles; molecular and crystal structure of the 1:1 and 1:2 Adducts of a 4-(2-diethylaminovinyl)pyrimidine with triflic acid

The 3-trifluoromethylsulfonyloxy-1-hexeniminium triflate 1 reacts with two equivalents of an aliphatic nitrile or of benzonitrile to give the 4-(2-diethylaminovinyl)pyrimidinediium bis(triflates) 4 , which can be deprotonated to give the monoprotonated or neutral pyrimidines 5 and 6 , respectively. When the related 1-phenyl-substituted iminium salt 7 is heated in acetonitrile at 140°, 1,5-cyclization of the cation leading to indane derivative 8 competes with formation of the pyrimidinium salt 9 . X-ray crystal structure determination reveals significant differences in the bond lengths of mono-and diprotonated 4-(2-diethylaminovinyl)pyrimidines 5a and 4a .     

Preparation of 1-ferrocenyl-2-methyl-1-propylamine,a highly effective chiral template in asymmetrically induced synthesis

The 1-ferrocenyl-2-methyl-1-propylamine (2a)is the most effective chiral template in asymmetrically induced peptide synthesis by stereoselective four component condensation (4CC). Two routes for the synthesis of this amine via its N,N-dimethyl derivative (12a) an described. One route involves the conversion of 12a into the corresponding azide 14a by treatment with methyl iodide/sodium azide in diglyme/water and subsequent reduction of the azide. The preferred other route consists of treating 12a with thioglycolic acid/formic acid to yield the carboxymethylmercapto derivative 9a and transformation of the latter into 2a with aqueous ammonia/ammonium chloride/mercuric chloride. Some related reactions are also discussed.     

Different approaches toward an automatic structural alignment of drug molecules: Applications to sterol mimics,thrombin and thermolysin inhibitors

Summary A relative comparison of the binding properties of different drug molecules requires their mutual superposition with respect to various alignment criteria. In order to validate the results of different alignment methods, the crystallographically observed binding geometries of ligands in the pocket of a common protein receptor have been used. The alignment function in the program SEAL that calculates the mutual superposition of molecules has been optimized with respect to these references. Across the reference data set, alignments could be produced that show mean rms deviations of approximately 1 Å compared to the experimental situation. For structures with obvious skeletal similarities a multiple-flexible fit, linking common pharmacophoric groups by virtual springs, has been incorporated into the molecular mechanics program MOMO. In order to combine conformational searching with comparative alignments, the optimized SEAL approach has been applied to sets of conformers generated by MIMUMBA, a program for conformational analysis. Multiple-flexible fits have been calculated for inhibitors of ergosterol biosynthesis. Sets of different thrombin and thermolysin inhibitors have been conformationally analyzed and subsequently aligned by a combined MIMUMBA/SEAL approach. Since for these examples crystallographic data on their mutual alignment are available, an objective assessment of the computed results could be performed. Among the generated conformers, one geometry could be selected for the thrombin and thermolysin inhibitors that approached reasonably well the experimentally observed alignment.     

Die Bestimmung geringer Mengen Quecksilber

Zusammenfassung Durch colorimetrische Bestimmung mit p-Dimethylaminobenzylidenrhodanin ist es möglich, 20–150 g Quecksilber in 100 ml Lösung gut reproduzierbar neben den meisten anderen Metallen direkt zu erfassen. Ist der Quecksilbergehalt der zu analysierenden Proben gering, kann Quecksilber durch Zementation mit Kupferpulver angereichert werden. Die Zementation gelingt aus schwach sauren, auch salpetersäurehaltigen Lösungen praktisch vollständig, wenn 3 Std gerührt wird und etwa in der Lösung vorhandene oxydierende Substanzen zuvor mit SO₂ reduziert werden. Zur Zementation gut geeignetes Kupferpulver ist durch Ausfällen mit Zinkpulver aus schwach saurer Kupfersulfatlösung zu gewinnen. Das Zementat, Kupferpulver mit anhaftendem Quecksilber, wird nach Filtration in Salpetersäure gelöst und die Lösung dann direkt colorimetriert. Bei Einwaagen von etwa 10 g Probesubstanz können nach der beschriebenen Methode noch Gehalte von 2–5 ppm Hg mit einem Fehler von ±10% bestimmt werden.     

CZE separations of basic proteins at low pH in fused silica capillaries with surfaces modified by silane derivatization and/or adsorption of polar polymers

Mixtures of several basic proteins have been used to test CZE capillaries with surfaces modified by new pretreatment procedures; the performance obtained has been compared with that achieved using capillaries treated by procedures described in the literature. It has been shown that addition of non-ionic polyvinylalcohols (PVA) to CZE buffer solutions deactivates even bare, i.e. untreated, fused silica surfaces and renders them suitable for separations of basic proteins. The performance obtained from such surfaces was comparable with that of capillaries modified by the more elaborate procedures of etching, silanol derivatization, and/or adsorptive coating (again with polymers). A home-made device is described which enables derivatization and coating reactions to be performed on fused silica capillaries under an inert atmosphere, i.e. one free from oxygen and water.     

Optical sensor materials for the detection of amines in organic solvents

A new optical polymer-based sensor was developed, which is able to recognize amines in organic solvents with high sensitivity. Thin polymer membranes were prepared and investigated, which contain a chromogenic functional dye (reactand) that shows a significant colour change during a reversible chemical reaction with the analyte. For that purpose the azo dye 4-trifluoroacetyl-4′-[N-(methacryloxyethyl)-N-(ethyl)amino]-azobenzene (CR-465) was synthesized, which contains a trifluoroacetyl moiety (receptor for interaction with amines) and in addition, a polymerizable methacrylate group. The methacrylate group links the dye covalently to the polymer matrix and the receptor recognizes the analyte via covalent binding. For immobilisation of the dye cross-linked methacrylate polymers with different composition were used. The highly cross-linked polymer network was stable against most organic solvents and exhibited enhanced stability against mechanical strain compared to plasticized PVC. The sensitivity of the reaction between the analyte and the dye was tailored by the choice of the solvent in which the analysis of the sensor layer was performed, with equilibrium constants for 1-butylamine ranging from 80 to 2000 M⁻¹ in chloroform and DMSO, respectively. In toluene as the solvent, sensor layers typically exhibited equilibrium constants of 100 M⁻¹ for 1-butylamine, 1300 M⁻¹ for 1,4-diaminobutane and 20,000 M⁻¹ for tris-(2-aminoethyl)amine. We have also investigated the cross-linked sensor layers with respect to molecular imprinting and did not find any enhancement in selectivity through imprinting in the presence of different analyte molecules.     

Biosynthesis of cis-Jasmone: a pathway for the inactivation and the disposal of the plant stress hormone jasmonic acid to the gas phase?

Flowers of Jasminum rincospernum convert deuterium-labeled jasmonic acid [²H₅]- 4a and methyl 1,2-didehy-drojasmonate [²H₄]- 8 into labeled cis-jasmone [²H₄]- 1. The labeling pattern of the resulting cis-jasmone ( 1 ) is consistent with a Grob fragmentation of the didehydrojasmonic acid 8a by decarboxylation after protonation of the keto group. The pathway is also operative in leaves of several higher plants, including mono- and dicotyledonous specimens. In Lima beans besides cis-jasmone ( 1 ) an equimolar mixture of trans- and cis-isomers of methyl jasmonate ( 4 ) and epi- 4 , is emitted after treatment with Jasmonic acid ( 4a ). The relative ratio of 1 and 4 /epi- 4 is critically dependent on the concentration of the administered jasmonic acid ( 4a ) and the ambient temperature of the plant. Unlike 4a , the 1,2-didehydrojasmonic acid ( 8a ) is not able to induce volatile biosynthesis. Therefore, the transformation of 4a via 8 a into 1 appears to have a special importance for the irreversible inactivation and disposal of the plant stress hormone jasmonic acid to the gas phase and may serve, besides other modes of inactivation, as a shunt in case of high internal of the stress hormone 4a. The conversion of the biologically active jasmonic acid ( 4a ) into the inactive and volatile cis-jasmone (1) is the first example of a disposal of an inactive metabolite of a phytohormone to the gas phase as an infinite sink.     

DETERMINATION OF THE KINETICS OF THE BACK REACTION OF PHOTOSYSTEM II IN THE PRESENCE OF 3–(3,4-DICHLORPHENYL)-1,1-DIMETHYLUREA FROM LUMINESCENCE MEASUREMENTS

Abstract— An alternative method to that used by Mar and Roy (1974) for the determination of the kinetics of the back reaction of photosystem II from the luminescence decay curve in the presence of 3–(3,4-dichlorophenyl)-1,1-dimethylurea (DCMU) has been suggested. The new theory relies upon two hypotheses: the well-known recombination hypothesis of luminescence and the assumption that the luminescence yield in the seconds region is given by the variable part of the live fluorescence yield. The second hypothesis was introduced since assuming a constant luminescence yield results in kinetic data that are not consistent with measurements of the kinetics of the back reaction by the restoration of the area over the fluorescence rise curve. The dependence of the live fluorescence yield from the concentration of closed PS II traps was assumed to be represented by Delosme's expression originally derived for the rise curve of the fluorescence yield in the presence of DCMU.
The theory is based on the fact that then the partial and total light sums of luminescence are simple functions of the concentration of the primary electron acceptor Q^- of PS II. Thus, after integrating the luminescence decay curve the theory permits a convenient evaluation of the kinetics of the back reaction [Q^-]( t ) in terms of the partial and total light sum.
This method was applied in order to determine the kinetics of the back reaction in Chlorella fusca in the presence of DCMU. It is shown that the kinetics of deactivation of the S, state can be described using the expression for the kinetics of the back reaction derived by Mar and Roy. As an alternative explanation, a biphasic first order decay of S₂ is proposed.