Quality management of preanalytical phase: impact of lithium heparin vacuum tubes changes on clinical chemistry tests

The validation process is essential in accredited laboratory medicine, but is rarely regarded as an issue in the preanalytical management. The aim of this study was to validate five kinds of lithium heparin vacuum tubes for routine clinical chemistry laboratory testing. Blood specimens from 100 volunteers in five different plasma vacuum tubes (Tube I: VACUETTE^®, Tube II: LABOR IMPORT^®, Tube III: S-Monovette^®, Tube IV: PST^® and Tube V: PST II^®) were collected by a single expert phlebotomist. The routine clinical chemistry tests were performed on a Cobas^® 6000 <c501> module. The significance of the differences between samples was statistically assessed at p < 0.005. The biases from the different tubes were compared with the current desirable quality specifications. Basically, significant differences could be confirmed by RM ANOVA for the results of the clinical chemistry tests on the following components: glucose, urea, creatinine, alkaline phosphatase, amylase, aspartate aminotransferase, alanine aminotransferase, lactate dehydrogenase, total bilirubin, phosphate, Ca, Mg, Fe and K. Clinically significant variations as compared with the current desirable quality specifications were found for glucose, creatinine, amylase, aspartate aminotransferase, alanine aminotransferase, lactate dehydrogenase, Ca, Mg and K. In conclusion, our results do not support arbitrary interchange among brands of plasma vacuum tubes. Future investigations are needed to understand the reasons of these observations; in the meantime, we suggest that laboratory managers standardize the procedures and frequently evaluate the quality of in vitro diagnostic devices.     

Optimization of headspace solid-phase microextraction for analysis of β-caryophyllene in a nanoemulsion dosage form prepared with copaiba (Copaifera multijuga Hayne) oil

Recent studies have shown the anti-inflammatory activity of Copaiba oils may be addressed to the high content of β-caryophyllene, the most common sesquiterpene detected, especially in the Copaifera multijuga Hayne species. In the present study, nanoemulsions were proposed as a delivery system for copaiba oil in view to treat locally inflamed skin. This article describes the optimization and validation of a stability-indicating SPME-GC method, for β-caryophyllene analysis in the nanoemulsions produced by high pressure homogenization. SPME methods are performed with PDMS (polydimethylsiloxane) fiber (100 μm). Three SPME parameters were evaluated by a three-level-three-factor Box–Behnken factorial design as potentially affecting the technique efficiency. According to the results obtained, the best conditions to extract β-caryophyllene were: (i) sampling temperature of 45 °C, (ii) sampling time of 20 min and (iii) no NaCl addition. Results coming from the forced degradation tests showed a reduction of β-caryophyllene peak area when both caryophyllene methanolic solution and nanoemulsions were exposed to acid hydrolysis, UV-A irradiation, oxidative (H₂O₂) and thermolitic (60 °C) conditions. Such reduction occurred in lower extent in the nanoemulsions, suggesting a protective effect of the formulation to β-caryophyllene content. Since no degradation products were detected in the same retention time of β-caryophyllene, the specificity of the method was demonstrated. The method was linear in the range of 0.14–0.68 μg mL⁻¹ of β-caryophyllene (r² > 0.999), and was also validated for precision (R.S.D. ≤ 5.0%), accuracy (97.85–101.87%) and robustness. Finally, the method was applied to quantification of β-caryophyllene content in the developed formulations.     

Electron beam accelerators—trends in radiation processing technology for industrial and environmental applications in Latin America and the Caribbean

The radiation processing technology for industrial and environmental applications has been developed and used worldwide. In Latin America and the Caribbean and particularly in Brazil there are 24 and 16 industrial electron beam accelerators (EBA) respectively with energy from 200 keV to 10 MeV, operating in private companies and governmental institutions to enhance the physical and chemical properties of materials. However, there are more than 1500 high-current electron beam accelerators in commercial use throughout the world. The major needs and end-use markets for these electron beam (EB) units are R and D, wire and electric cables, heat shrinkable tubes and films, PE foams, tires, components, semiconductors and multilayer packaging films. Nowadays, the emerging opportunities in Latin America and the Caribbean are paints, adhesives and coatings cure in order to eliminate VOCs and for less energy use than thermal process; disinfestations of seeds; and films and multilayer packaging irradiation. For low-energy EBA (from 150 keV to 300 keV). For mid-energy EBA (from 300 keV to 5 MeV), they are flue gas treatment (SO₂ and NO_X removal); composite and nanocomposite materials; biodegradable composites based on biorenewable resources; human tissue sterilization; carbon and silicon carbide fibers irradiation; irradiated grafting ion-exchange membranes for fuel cells application; electrocatalysts nanoparticles production; and natural polymers irradiation and biodegradable blends production. For high-energy EBA (from 5 MeV to 10 MeV), they are sterilization of medical, pharmaceutical and biological products; gemstone enhancement; treatment of industrial and domestic effluents and sludge; preservation and disinfestations of foods and agricultural products; soil disinfestations; lignocellulosic material irradiation as a pretreatment to produce ethanol biofuel; decontamination of pesticide packing; solid residues remediation; organic compounds removal from wastewater; and treatment of effluent from petroleum production units and liquid irradiation process to treat vessel water ballast. On the other hand, there is a growing need of mobile EB facilities for different applications in South America.     

A Clustering Search metaheuristic for the Point-Feature Cartographic Label Placement Problem

The Point-Feature Cartographic Label Placement (PFCLP) problem consists of placing text labels to point features on a map avoiding overlaps to improve map visualization. This paper presents a Clustering Search (CS) metaheuristic as a new alternative to solve the PFCLP problem. Computational experiments were performed over sets of instances with up to 13,206 points. These instances are the same used in several recent and important researches about the PFCLP problem. The results enhance the potential of CS by finding optimal solutions (proven in previous works) and improving the best-known solutions for instances whose optimal solutions are unknown so far.     

Humic Acid Improves Zn Fertilization in Oxisols Successively Cultivated with Maize–Brachiaria

Zinc (Zn) is an essential micronutrient for plant growth, and Zn deficiency is a global issue, especially in tropical soils. This study aimed to investigate the effects of humic acid (HA) and the Zn addition (Zn sulfate + HA) on the growth of maize and brachiaria in two contrasting Oxisols. The potential complexation of Zn sulfate by HA was evaluated by Fourier-transform infrared (FTIR) spectroscopy analysis. Zinc content and its availability in solution and the shoot and root biomass of maize and brachiaria were determined. FTIR spectroscopy revealed the complexation of Zn sulfate by HA through its S and C functional groups. In both Oxisols, solution Zn increased due to the combined use of Zn and HA. In a soil type-dependent manner, maize biomass and Zn in its shoots were affected only by the exclusive use of Zn fertilization. In the Yellow Oxisol, brachiaria growth and Zn accumulated in its shoot were positively affected by the combined use of Zn fertilization with HA. In the Oxisol with lower organic matter content, HA can assure adequate supplying of residual Zn, while increasing growth of brachiaria cultivated in sequence to maize.     

Topology optimization methods for guided flow – comparison of optimality criteria vs. phase-field method

Optimization of guided flow problems is an important task for industrial applications especially those with high Reynolds numbers. There exist several optimization methods to increase the energy efficiency of these problems. Different optimization methods are shown bei Klimetzek [1], Hinterberger [2] and Pingen [3]. In recent years the phase-field method has been shown to be an applicable method for different kinds of topology optimization [4, 5]. We present results of topology optimization methods with optimality criterion and by using a phase-field model in the area of guided fluid flow problems. The two methods aim on the same main target reducing the pressure drop between the inlet and outlet of the flow domain. The first method is based on local optimality criterion, preventing the backflow in the flow domain [1, 6, 7]. The second method is based on a phase field model, which describes a minimization problem and uses a specially constructed driving force to minimize the total energy of the system [4, 5]. We investigate the capabilities and limits of both methods and present examples of different resulting geometries. The initial configurations are prepared in a way that the same optimization problem is solved with both methods. We discuss these results regarding the shape of the improved flow geometry. (© 2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Absolutely summing polynomials on Banach spaces with unconditional basis

If X is a Banach space with a normalized unconditional Schauder basis (xn), we define whenever and obtain estimates for μX,(xn) when every continuous m-homogeneous polynomial from X into Y is absolutely (q,1) summing. Our results provide new information on coincidence situations between the space of absolutely summing m-homogeneous polynomials and the whole space of continuous m-homogeneous polynomials. In particular, when m=1, we obtain new contributions to the linear theory of absolutely summing operators.     

Drude's model calculation rule on electrical transport in Sb-doped SnO2 thin films, deposited via sol-gel

The evaluation of free carrier concentration based on Drude's theory can be performed by the use of optical transmittance in the range 800-2000 nm (near infrared) for Sb-doped SnO₂ thin films. In this article, we estimate the free carrier concentration for these films, which are deposited via sol-gel dip-coating. At approximately 900 nm, there is a separation among transmittance curves of doped and undoped samples. The plasma resonance phenomena approach leads to free carrier concentration of about 5×10²⁰ cm⁻³. The increase in the Sb concentration increases the film conductivity; however, the magnitude of measured resistivity is still very high. The only way to combine such a high free carrier concentration with a rather low conductivity is to have a very low mobility. It becomes possible when the crystallite dimensions are taken into account. We obtain grains with 5 nm of average size by estimating the grain size from X-ray diffraction data, and by using line broadening in the diffraction pattern. The low conductivity is due to very intense scattering at the grain boundary, which is created by the presence of a large amount of nanoscopic crystallites. Such a result is in accordance with X-ray photoemission spectroscopy data that pointed to Sb incorporation proportional to the free electron concentration, evaluated according to Drude's model.