Flow and Sequential Injection Manifolds for the Spectrophotometric Determination of Captopril Based on its Oxidation by Fe(III)

 Two new simple and rapid methods are reported for the accurate and precise spectrophotometric determination of captopril (CPL) using flow (FI) and sequential injection (SI) analysis. The methods are based on the fast oxidation of CPL by Fe(III). The produced Fe(II) reacts with 2,2′-dipyridyl-2-pyridylhydrazone (DPPH) in acidic medium to form a colored complex which is monitored spectrophotometrically at 535 nm. Both methods allow the determination of the analyte up to 1000 mg L⁻¹ at a sampling rate of 120 and 60 injections per hour for FI and SI, respectively. The methods are very precise [s _r=0.8 and 1.2% at 500 mg L⁻¹ CPL (n=12) for FI and SI, respectively] and the 3σ detection limits (c _L=4.0 and 7.0 mg L¹, respectively) are quite satisfactory. Their application to a variety of anti-hypertensive commercial pharmaceutical formulations showed excellent results (relative errors, e _r, < ± 1.6% in all cases compared to an official HPLC method), while common pharmaceutical excipients were found not to interfere. Recovery experiments further verified the accuracy of the developed methods, as the percent recoveries were in the range of 98.1–102.5%. Author for correspondence. E-mail: themelis@chem.auth.gr Received May 9, 2002; accepted January 8, 2003 Published online May 5, 2003     

The total synthesis of coleophomones B, C, and D

Members of the coleophomone family of natural products all possess several intriguing and challenging architectural features, as well as exhibit unusual biological activity. They, therefore, constitute attractive targets for synthesis. In this Article, we describe the total synthesis of coleophomones B (2), C (3), and D (4). The highly strained and congested 11-membered macrocycle of coleophomones B (2) and C (3) was constructed using an impressive olefin metathesis reaction. Furthermore, both of the requisite geometric isomers of the Delta(16,17) within the macrocycle could be accessed from a common precursor, facilitating a divergence that lent the coleophomone B (2)/C (3) synthesis an unusually high degree of efficiency. The synthesis of coleophomone D (4) confirmed that it exists as a dynamic mixture of isomeric forms with a different aromatic substitution pattern from the other family members.     

Attraction of iodide ions by the free water surface, revealed by simulations with a polarizable force field based on Drude oscillators

Recent theoretical and experimental studies have shown that polarizable anions, such as iodide and bromide, preferentially accumulate close to the surface of electrolyte solutions. This finding is in sharp contrast to the previously prevailing idea that salts are dielectrically excluded from the free water surface and opens up new avenues for research in specific salt effects. In this work, we have verified the ability of a recently introduced polarizable water model, SWM4-DP, to reproduce this behavior, by simulations of a NaI/water slab, corresponding to a 1.2 M solution. The water and ion polarizabilities are modeled by classical Drude oscillator particles. As revealed by the simulations, a double layer is formed close to the free water surface, with the iodide ions located closer to the interface and the sodium ions at a neighboring, interior layer. Near the surface, all solution species acquire an induced dipole moment, that is perpendicular to the surface and points toward the exterior. The double charge layer causes ordering of water at a subsurface region. Simulations with a simpler system of a single iodide ion in a water slab show that the surface position is stabilized by induced charge interactions; in contrast, the charge-dipole interactions between the iodide permanent charge and the water permanent dipole moment favor the bulk position. Thus, the polarizabilities of ion and water are essential for explaining the increased preference of iodide for the air-water interface, in accordance with other studies.     

Self-assembled luminescent CdSe-ZnS quantum dot bioconjugates prepared using engineered poly-histidine terminated proteins

We report a simple and versatile approach for the conjugation of luminescent CdSe-ZnS core-shell quantum dots (QDs) to proteins through coordination of engineered C-terminal oligohistidine sequences. Several histidine tail containing proteins were self-assembled onto the QD surface using this method. A recombinant antibody specific for the high explosive 2,4,6-trinitrotoluene (TNT) was conjugated to QDs through a carboxy terminal histidine tail and the bioconjugate used to detect TNT by competitive immunoassay. TNT was detected over the range of 10 μg/ml down to 41 ng/ml using the scFv conjugated to QDs. These results open up the possibility to conjugate luminescent QDs to a whole range of proteins to form QD bioconjugates that can be effectively used in bio-oriented applications, such as sensing, imaging, immunoassay and other diagnostics.     

Development of a multiplex microarray microsystem

A hybrid multiplex microarray microsystem has been developed that consists of 32 individually addressable array reaction chambers, supporting the use of multichannel pipettes for addition of up to 8 samples simultaneously. Discrimination between Campylobacter jejuni and Campylobacter coli bacteria was observed in DNA samples containing Campylobacter spp., with the same specificity and sensitivity as when compared to a full-size microarray. The spinloaded multiplex microarray microsystem described provides a novel and convenient test format for simultaneous low-density microarray analysis and is universally adaptable to other DNA, protein or small molecule microarray based applications.     

Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule

Molecularly imprinted polymers (MIPs) selective for scopolamine were produced using hyoscyamine (a close structural analogue) as template molecule. The produced polymers were used as media for solid-phase extraction, exhibiting selective binding properties for the analyte from biological samples. Human and calf urine and serum were processed on the MIP under various extraction protocols. The best performance was observed after loading the analyte in aqueous environment facilitating retention on the MIP by non-selective hydrophobic interactions. The MIPs were subsequently washed using an optimised solvent system to enable selective desorption of the analyte. Other related and non-related compounds were accessed to evaluate molecular recognition properties. Recoveries of up to 79% were achieved for the analyte of interest from biological samples.     

An iminophosphine dendrimeric ligand and its evaluation in the Heck reaction

DAB-dendr-(NH₂)₃₂ has been modified to produce two novel dendrimeric P,N-ligands, DAB-dendr-[1,2-(NCHC₆H₄PPh₂)]₃₂ and DAB-dendr-[1,2-(NHCH₂C₆H₄PPh₂)]₃₂. These were both found to activate electron rich aryl bromides in the Heck reaction. The reactions seem to proceed better in a novel solvent system consisting of an equimolar mixture of a tertiary amine with acetic acid. A marked dependence of the conversion on the [equivalents of dendrimeric ligand]/[Pd] ratio has been observed with conversion decreasing as the ratio of dendrimer equivalents to Pd increases. This phenomenon is attributed to interactions of the arms bearing the metal with neighboring ones within the dendrimer.     

Novel Monte Carlo scheme for systems with short-ranged interactions

We propose a Monte Carlo (MC) sampling algorithm to simulate systems of particles interacting via very short-ranged discontinuous potentials. Such models are often used to describe protein solutions or colloidal suspensions. Most normal MC algorithms fail for such systems because, at low temperatures, they tend to get trapped in local potential-energy local minima due to the short range of the pair potential. To circumvent this problem, we have devised a scheme that changes the construction of trial moves in such a way that the potential-energy difference between initial and final states drops out of the acceptance rule for the Monte Carlo trial moves. This approach allows us to simulate systems with short-ranged attraction under conditions that were unreachable up to now.     

Novel rectangular [Fe4(mu4-OHO)(mu-OH)(2)](7+) versus "butterfly" [Fe4(mu3-O2](8+) core topology in the Fe(III)/RCO2(-)/phen reaction systems (R = Me,Ph; phen = 1,10-phenanthroline): preparation and properties of [Fe4(OHO)(OH)(2)(O2CMe)(4)(phen)(4)](ClO4)(3), [Fe4O2(O2CPh)(7)(phen)(2)](ClO4), and [Fe4O2(O2CPh)(8)(phen)(2)

The preparations, X-ray structures, and detailed physical characterizations are presented for three new tetranuclear Fe(III)/RCO(2)(-)/phen complexes, where phen = 1,10-phenanthroline: [Fe(4)(OHO)(OH)(2)(O(2)CMe)(4)(phen)(4)](ClO(4))(3).4.4MeCN.H(2)O (1.4.4MeCN.H(2)O); [Fe(4)O(2)(O(2)CPh)(7)(phen)(2)](ClO(4)).2MeCN (2.2MeCN); [Fe(4)O(2)(O(2)CPh)(8)(phen)(2)].2H(2)O (3.2H(2)O). Complex 1.4.4MeCN.H(2)O crystallizes in space group P2(1)/n, with a = 18.162(9) A, b = 39.016(19) A, c = 13.054(7) A, beta = 104.29(2) degrees, Z = 4, and V = 8963.7 A(3). Complex 2.2MeCN crystallizes in space group P2(1)/n, with a = 18.532(2) A, b = 35.908(3) A, c = 11.591(1) A, beta = 96.42(1) degrees, Z = 4, and V = 7665(1) A(3). Complex 3.2H(2)O crystallizes in space group I2/a, with a = 18.79(1) A, b = 22.80(1) A, c = 20.74(1) A, beta = 113.21(2) degrees, Z = 4, and V = 8166(1) A(3). The cation of 1 contains the novel [Fe(4)(mu(4)-OHO)(mu-OH)(2)](7+) core. The core structure of 2 and 3 consists of a tetranuclear bis(mu(3)-O) cluster disposed in a "butterfly" arrangement. Magnetic susceptibility data were collected on 1-3 in the 2-300 K range. For the rectangular complex 1, fitting the data to the appropriate theoretical chi(M) vs T expression gave J(1) = -75.4 cm(-1), J(2) = -21.4 cm(-1), and g = 2.0(1), where J(1) and J(2) refer to the Fe(III)O(O(2)CMe)(2)Fe(III) and Fe(III)(OH)Fe(III) pairwise exchange interactions, respectively. The S = 0 ground state of 1 was confirmed by 2 K magnetization data. The data for 2 and 3 reveal a diamagnetic ground state with antiferromagnetic exchange interactions among the four high-spin Fe(III) ions. The exchange coupling constant J(bb) ("body-body" interaction) is indeterminate due to prevailing spin frustration, but the "wing-body" antiferromagnetic interaction (J(wb)) was evaluated to be -77.6 and -65.7 cm(-1) for 2 and 3, respectively, using the appropriate spin Hamiltonian approach. M?ssbauer spectra of 1-3 are consistent with high-spin Fe(III) ions. The data indicated asymmetry of the Fe(4) core of 1 at 80 K, which is not detected at room temperature due to thermal motion of the core. The spectra of 2 and 3 analyze as two quadrupole-split doublets which were assigned to the body and wing-tip pairs of metal ions. (1)H NMR spectra are reported for 1-3 with assignment of the main resonances.