钢管和有机玻璃管油水两相摩擦压降比较实验

本文对水平放置的内径为40 mm的钢管和有机玻璃管内的油水两相流动摩擦压降特性进行了比较实验研究.从实验方面含水率和混合流速等因素对钢管和有机玻璃管内油水两相油滴分散流摩擦阻力压降规律的影响进行了详细研究.实验结果表明:含水率和混合流速是影响压降的主要因素;在本实验范围内,除了分层流区域以外,有机玻璃管内的油水两相摩擦阻力压力梯度大于钢管内油水两相摩擦阻力压力梯度.     

Fabrication and properties of PLT/PLZT/PLT structures obtained by RF magnetron sputtering

Ferroelectric Pb_0.84La_0.16Ti_0.96O₃/Pb_0.96La_0.04(Zr_0.52Ti_0.48)_0.99O₃/Pb_0.84La_0.16Ti_0.96O₃ (PLT/PLZT/PLT) structures were fabricated on platinum-coated silicon wafers by RF magnetron sputtering. A Pb_0.84La_0.16Ti_0.96O₃ layer was used as a seed layer to improve the crystallization and enhance the ferroelectric properties of the PLZT film. With the PLT seed layers, the films showed excellent ferroelectric properties in terms of large remnant polarization (2P_r) of 52.7 μC/cm², lower coercive field (2E_c) of 130 kV/cm for an applied field of 500 kV/cm. Moreover, the PLT/PLZT/PLT structures exhibited good fatigue endurance after 10¹⁰ switching cycles, which was attributed to the double-sided PLT layers. They improved the electrical fatigue by eliminating the pyrochlore phase, reduced the strong (111) orientation, and assimilated the oxygen vacancies from the PLZT layer.     

基于CCD的无接触式的物体测量

基于CCD的物体测量平台，首先对物体图像进行预处理，继而利用Canny算子提取物体边缘，再通过本文改进的Hough变换实现对被测物体边界直线检测和重构，最后通过多项式插值算法实现物体像素尺寸到物体实际尺寸的转换．实验证明，此方法能够实现无接触式物体尺寸较高精度的测量．     

Long lasting phosphorescent properties of Ti doped ZrO2

A novel long-lasting afterglow phosphor ZrO₂:Ti is prepared by the conventional solid-stated method and their luminescent properties are investigated. A bluish white strong and broad emissive band, which is attributed to originate from the recombination of electrons trapped by F⁺ centers and the holes created in Valence band, is observed under 254 nm UV irradiation. The identical color long afterglow, which lasts about 1 h, is found in the ZrO₂:Ti phosphor after removing the 254 nm UV light. The mechanism of the long lasting phosphorescence (LLP) has been discussed based on the thermoluminescence (TL) results. The replacement of Zr by Ti produces more anion vacancies, resulting in the enhanced photoluminescence (PL) and LLP of ZrO₂:Ti sample. These results indicate that ZrO₂:Ti phosphor has potential promising applications.     

(1,2-(1H-1,2,4-三唑))乙烷的一维双链Cu(Ⅱ)配合物合成与表征(英文)

利用高度柔性的双三唑配体(1,2-(1H-1,2,4-三唑))乙烷(L)和铜盐反应合成了1个新的具有一维双链结构的铜(Ⅱ)配合物{[Cu(cis-L)2Br]Br.2H2O}n(1)。单晶结构表明:配合物1的晶体属于三斜晶系,P1空间群。在配合物1中双三唑配体采用反式构型,桥联相邻的中心铜离子形成一维双链结构,晶格中游离的Br原子同配位水分子形成了四元环状的Br…O超分子环。测定了配合物1在2～300 K的变温磁化率,结果表明相邻铜离子间存在弱的反铁磁相互作用。     

Low band gap copolymers consisting of porphyrins,thiophenes, and 2,1,3‐benzothiadiazole moieties for bulk heterojunction solar cells

Two novel low band gap conjugated copolymers containing porphyrins, thiophenes, and 2,1,3‐benzothiadiazole ( BTZ ) moieties were synthesized and applied in bulk heterojunction solar cells. The thermal, optical, electrochemical, and photovoltaic properties of the two copolymers were examined to investigate the effect of the introduction of BTZ moiety in the backbone of the porphyrin polymers. The copolymers exhibited good thermal stability and film‐forming ability. The absorption spectra indicated that the BTZ moiety has significant influence on the UV–visible region spectra of the copolymers: with increasing the molar amount of BTZ moieties in conjugated main chain, the absorption in the range of 450–700 nm is largely broadened and red‐shifted compared to the similar polymers without BTZ moiety, and the optical band gaps of copolymers were narrowed to ～1.50 eV. The photoluminescence spectra showed that there is effective charge transfer in the whole conjugated main chain. Cyclic voltammetry displayed that the band gaps were reduced effectively by the introduction of the BTZ moieties. The bulk heterojunction solar cells were fabricated based on the blend of the copolymers and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) in a 1:2 weight ratio. The maximum power conversion efficiency of 0.91% was obtained by using P2 as the electron donor under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Efficient synthesis of 1,3,5-trisubstituted benzenes via three Pd-mediated carbon-sulfur, carbon-nitrogen and carbon-carbon bond formation reactions

An efficient synthesis of 1,3,5-trisubstituted benzenes via a sequential Pd-mediated carbon-sulfur, carbon-nitrogen, and carbon-carbon bond formation reactions is reported. Selective amidation and sulfonamidation reactions are accomplished via Pd-catalyzed reactions between aryl chlorides and an acetamide or a methanesulfonamide.     

Efficient removal of unwanted signals in NMR spectra using the filter diagonalization method

It is often desirable to selectively remove corrupting or uninteresting signals from complex NMR spectra without disturbing overlapping or nearby signals. For biofluids in particular, removal of solvent and urea signals is important for retaining quantitative accuracy in NMR‐based metabonomics. This article presents a novel algorithm for efficient filtering of unwanted signals using the filter diagonalization method (FDM). Unwanted signals are modeled in the time domain using FDM. This modeled signal is subtracted from the original free induction decay. The resulting corrected signal is then processed using established workflow. The algorithm is found to be reliable and fast. By eliminating large, broad, uninteresting signals, many spectra can be subjected to fully automated absolute value processing, allowing objective preparation of spectra for pattern recognition analysis. Copyright © 2009 John Wiley & Sons, Ltd.     

Direct profiling of phospholipids and lysophospholipids in rat brain sections after ischemic stroke

Stroke, a deleterious cerebrovascular event, is caused by a critical reduction in the blood flow to the brain parenchyma that leads to brain injury and loss of brain functions. The inflammatory responses following ischemia often aggravate the neurological damage. Several pro‐inflammatory mediators released after stroke are closely related to the metabolism of phospholipids. In this study we directly profiled the changes in phospholipids in the infarcted rat cerebral cortex 24 hours after middle cerebral artery occlusion (MCAO) using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). Several phosphatidylcholine (PC) species and sphingomyelin (SM) were significantly decreased after infarction. The cationization pattern of the remaining PCs showed a prominent shift from a mostly potassiated or protonated form to a predominantly sodiated pattern. Stroke also elevated the lysophosphatidylcholines (LPCs) and heme in tissue. The isobaric pairs in PC and LPC classes were resolved by masses through their respective alkali metal adducts in the presence of CsCl. The major fatty acyl LPC species were also structurally confirmed by MALDI‐MS/MS. Overall, the results described the changes in PC and LPC species in the infarcted rat cortex. The elevated tissue levels of LPCs and heme signify the ongoing pathological lipid breakdown and the state of parenchymal inflammation. The elevated LPC level in tissue suggests a means of intervention through lysophospholipid metabolism that could potentially benefit the management of stroke and other acute neurological injuries. Copyright © 2010 John Wiley & Sons, Ltd.     

芴2,7位取代的9,9’-二芳基螺芴类化合物的合成及性能

设计并合成了一系列以三苯胺为核,芴衍生物为外围基团的有机蓝光小分子,该合成通过Suzuki反应在9-芳基芴的2位和(或)7位引入相同或不同取代基作为模块,并利用Friedel-Crafts反应将4-甲基三苯胺与这一系列模块结合.用NMR,MS和元素分析进行结构表征.荧光测试结果表明该类化合物溶液的荧光发射波长范围在442～466 nm之间,属蓝光发射.电化学测试显示该类材料的HOMO能级位于-5.15～-5.19 eV之间.差示扫描量热仪与热重分析得出化合物的玻璃化转变温度在166℃以上,热分解温度高于398℃,表明该类材料具有良好的热稳定性.