Multicomponent analysis of drinking water by a voltammetric electronic tongue

A voltammetric electronic tongue is described that was used for multicomponent analysis of drinking water. Measurements were performed on drinking water from a tap and injections of the compounds NaCl, NaN₃, NaHSO₃, ascorbic acid, NaOCl and yeast suspensions could be identified by use of principal component analysis (PCA). A model based on partial least square (PLS) was developed for the simultaneously prediction of identification and concentration of the compounds NaCl, NaHSO₃ and NaOCl. By utilizing this type of non-selective sensor technique for water quality surveillance, it will be feasible to detect a plurality of events without the need of a specific sensor for each type of event.     

Some Remarks on SLE Bubbles and Schramm’s Two-point Observable

Simmons and Cardy recently predicted a formula for the probability that the chordal SLE_8/3 path passes to the left of two points in the upper half-plane. In this paper we give a rigorous proof of their formula. Starting from this result, we derive explicit expressions for several natural connectivity functions for SLE_8/3 bubbles conditioned to be of macroscopic size. By passing to a limit with such a bubble we construct a certain chordal restriction measure and in this way obtain a proof of a formula for the probability that two given points are between two commuting SLE_8/3 paths. The one-point version of this result has been predicted by Gamsa and Cardy. Finally, we derive an integral formula for the second moment of the area of an SLE_8/3 bubble conditioned to have radius 1. We evaluate the area integral numerically and relate its value to a hypothesis that the area follows the Airy distribution.     

PEGylated Luminescent Gold Nanoclusters: Synthesis,Characterization, Bioconjugation,and Application to One‐ and Two‐Photon Cellular Imaging

Biocompatible, near‐infrared luminescent gold nanoclusters (AuNCs) are synthesized directly in water using poly(ethylene glycol)‐dithiolane ligands terminating in either a carboxyl, amine, azide, or methoxy group. The ≈1.5 nm diameter AuNCs fluoresce at ≈820 nm with quantum yields that range from 4–8%, depending on the terminal functional group present, and display average luminescence lifetimes approaching 1.5 μs. The two‐photon absorption (TPA) cross‐section and two‐photon excited fluorescence (TPEF) properties are also measured. Long‐term testing shows the poly(ethylene glycol) stabilized AuNCs maintain colloidal stability in a variety of media ranging from saline to tissue culture growth medium along with tolerating storage of up to 2 years. DNA and dye‐conjugation reactions confirm that the carboxyl, amine, and azide groups can be utilized on the AuNCs for carbodiimide, succinimidyl ester, and Cu^I‐assisted cycloaddition chemistry, respectively. High signal‐to‐noise one‐ and two‐photon cellular imaging is demonstrated. The AuNCs exhibit outstanding photophysical stability during continuous‐extended imaging. Concomitant cellular viability testing shows that the AuNCs also elicit minimal cytotoxicity. Further biological applications for these luminescent nanoclustered materials are discussed.     

Photoelectron Spectroscopy of Nickel, Palladium, and Platinum Oxide Anions

The 364-nm negative ion photoelectron spectra of XO and OXO molecules (X=Ni, Pd, and Pt) are reported. The spectra yield the electron affinities (EAs): EA(NiO)=1.455±0.005 eV; EA(PdO)=1.672±0.005 eV; EA(PtO)=2.172±0.005 eV; EA(ONiO)=3.043±0.005 eV; EA(OPdO)=3.086±0.005 eV; EA(OPtO)=2.677±0.005 eV. In addition, for the diatomics, transitions from the anion X?²Π_3/2 and X?′²Π_1/2 states into neutral X?³Σ⁻, ³Π, and for NiO and PdO, ¹Π, are assigned. Several states have been reassigned from those in the existing literature. Anion ²Π_3/2-²Π_1/2 spin-orbit splittings are measured, as are neutral ³Π₂-³Π₁ spin-orbit splittings: the XO ³Π ₂-³Π₁ splittings increase from 405±30 cm⁻¹ (NiO) to 805±30 cm⁻¹ (PdO) to 3580±40 cm⁻¹ (PtO). A bond length shortening of 0.03±0.01 Å is measured upon electron detachment from NiO⁻, resulting in an anion bond length of 1.66±0.01 Å. The bond length does not change upon electron detachment from PdO⁻ using 3.4-eV photons. The Pt-O bond length decreases by 0.035±0.010 Å in the ³Π₁←²Π_3/2 transition. The spectrum of OPtO displays a significantly more extended vibrational progression than those of ONiO or OPdO, and the O-Pt bond length is found to decrease by 0.07±0.01 Å upon electron detachment. The spectra support the view that the Ni-O bond is largely ionic, the Pd-O bond is somewhat less so, and the Pt-O bond displays a substantial covalent character.     

Hydrogels from a water-soluble zwitterionic polythiophene: dynamics under pH change and biomolecular interactions observed using quartz crystal microbalance with dissipation monitoring

The water-soluble zwitterionic polythiophene, poly(3-((S)-5-amino-5-carboxyl-3-oxapentyl)-2,5-thiophene) hydrochloride (POWT), is a conjugated polyelectrolyte (CPE) with properties well suited for biochip applications. CPEs readily form hydrogels when exposed to water-based buffer solutions or biomolecule solutions. In this work, we used in situ quartz crystal microbalance with dissipation (QCM-D) monitoring to collect information on the interaction between POWT films exposed to buffers with different pH and POWT/DNA chains. Our data show that POWT swells significantly when exposed to low-pH buffers, such as pH 4 acetate, this is seen as an increase in thickness and decrease in viscosity obtained via a Voight-based modeling of combined f and D QCM-D measurements. The magnitude of thickness and viscosity change upon changing from a pH 10 carbonate buffer to pH 4 acetate is 100% increase in thickness and 50% decrease in viscosity. The response of the hydrogel under pH change is well correlated with fluorescence data from POWT films on glass. The state of the hydrogel is important during interaction with biomolecules; illustrated by the observation that a swollen CPE hydrogel adsorbs a higher amount of DNA than a compacted one. In agreement with previous results, the QCM-D data confirmed that the POWT/DNA hydrogel sense complementary DNA specifically and with negligible binding of noncomplementary DNA. These results are important for efficient constructions of biochips in water environments using this class of materials.     

Synthesis and characterisation of Gd2O3 nanocrystals functionalised by organic acids

Nanocrystals of Gd2O3 have been prepared by various methods, using, e.g., trioctylphosphine oxide (TOPO), diethylene glycol (DEG) or glycine. The crystalline particles were of sizes 5 to 15 nm. Different carboxylic acids, e.g., oleic acid or citric acid, were adsorbed onto the surface of the particles made with DEG. IR measurements show that the molecules coordinate to the Gd2O3 surface via the carboxylate group in a bidentate or bridging manner. The organic-acid/particle complexes were characterised by XRPD, TEM, FTIR, Raman, and XPS.     

Enzymatic degradation of model cellulose films

Enzymatic degradation of model cellulose films prepared by a spin-coating technique was investigated by ellipsometry. The cellulose films were prior to degradation characterized by ellipsometry, contact angle measurements, ESCA (electron spectroscopy for chemical analysis) and AFM (atomic force microscopy). At enzyme addition to preformed cellulose films an initial adsorption was observed, which was followed by a total interfacial mass decrease due to enzymatic degradation of the cellulose films. The degradation rate was found to be constant during an extended time of hours, whereafter the degradation leveled off. In parallel to the decreased interfacial mass, the cellulose degradation resulted in a thinner and more dilute interfacial film. At long degradation times, however, there was an expansion of the cellulose film. The enzyme concentration affected the degradation rate significantly, with a faster degradation at a higher enzyme concentration. The effects of pH, temperature, ionic strength and stirring rate in the cuvette were also investigated.     

Rotational CARS N2 thermometry: validation experiments for the influence of nitrogen spectral line broadening by hydrogen

Rotational coherent anti‐Stokes Raman spectroscopy (CARS) in fuel‐rich hydrocarbon flames, with a large content of hydrogen in the product gases (∼20%), has in previous work shown that evaluated temperatures are raised several tens of Kelvin by taking newly derived N₂ H₂ Raman line widths into account. To validate these results, in this work calibrated temperature measurements at around 300, 500 and 700 K were performed in a cell with binary gas mixtures of nitrogen and hydrogen. The temperature evaluation was made with respect to Raman line widths either from self‐broadened nitrogen only, N₂ N₂ [energy‐corrected‐sudden (ECS)], or by also taking nitrogen broadened by hydrogen, N₂ H₂ [Robert–Bonamy (RB)], Raman line widths into account. With increased amount of hydrogen in the cell at constant temperature, the evaluated CARS temperatures were clearly lowered with the use of Raman line widths from self‐broadened nitrogen only, and the case with inclusion of N₂ H₂ Raman line widths was more successful. The difference in evaluated temperatures between the two different sets increases approximately linearly, reaching 20 K (at T ∼ 300 K), 43 K (at T = 500 K) and 61 K (at T = 700 K) at the highest hydrogen concentration (90%). The results from this work further emphasize the importance of using adequate Raman line widths for accurate rotational CARS thermometry. Copyright © 2010 John Wiley & Sons, Ltd.     

Fast Laplace Transforms for the Exponential Radon Transform

The Fourier slice theorem for the standard Radon transform generalizes to a Laplace counterpart when considering the exponential Radon transform. We show how to use this fact in combination with algorithms for the unequally spaced fast Laplace transform to construct fast and accurate methods for computing both the forward exponential Radon transform and the corresponding back-projection operator.     

Raman spectroscopic studies of terthiophenes for molecular electronics

The effect of thiol and selenol functionalization on the vibrational spectra and photochemical stability of terthiophene based molecular wires was investigated using surface-enhanced Raman scattering (SERS). The molecules were found to exhibit markedly different properties at the silver surface of the SERS substrate, despite having almost identical Raman spectra in solution and in the solid state. In contrast to terthiophene (3T), the bisthiolterthiophene (T3) and biselenol-terthiophene (Se3) molecules were stable against photoinduced structural changes when adsorbed to the metal surface at low concentrations. This indicates that the strong bonds to the silver surface, via S or Se terminal atoms, leads to a rapid decay of photoexcited states. Comparison with ab initio calculations shows that both T3 and Se3 bind with only one of the functional groups to the Ag surface.