Isolation and purification of inflacoumarin A and licochalcone A from licorice by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) technique in semi-preparative scale has been applied to isolate and purify bioactive flavone compounds from the ethanol extract of Glycyrrhiza inflata Bat., a particular plant species of licorice. HSCCC separation was performed with a two-phase solvent system composed of n-hexane-chloroform-methanol-water (5:6:3:2, v/v) by eluting the lower mobile phase at a flow rate of 1.8 ml/min and a revolution speed of 800 rpm. Purification was performed with a two-phase solvent system composed of n-hexane-chloroform-methanol-water (1.5:6:3:2, v/v) by eluting the lower mobile phase at a flow-rate of 1.5 ml/min and a revolution speed of 800 rpm. Two major flavone peaks: inflacoumarin A and licochalcone A were collected and the respective yields of the peaks amount to 6 mg (8.6%, w/w) and 8 mg (11.4%, w/w) from 70 mg of the crude extract sample. The purities of inflacoumarin A and licochalcone A reached 99.6% and 99.1%, respectively, after a sequential purification run. The structures of inflacoumarin A and licochalcone A were positively confirmed by 1H NMR and 13C NMR, 1H-13C-COSY, UV, FT-IR and electron ionization MS analyses.     

Screening,library-assisted identification and validated quantification of fifteen neuroleptics and three of their metabolites in plasma by liquid chromatography/mass spectrometry with atmospheric pressure chemical ionization

A liquid chromatographic/mass spectrometric assay with atmospheric pressure chemical ionization (APCI-LC/MS) is presented for the fast and reliable screening and identification and for the precise and sensitive quantification of 15 neuroleptic (antipsychotic) drugs and three of their relevant metabolites in plasma. It allows confirmation of the diagnosis of a neuroleptic overdose and monitoring of psychiatric patients' compliance. The neuroleptics amisulpride, bromperidol, clozapine, droperidol, flupenthixol, fluphenazine, haloperidol, melperone, olanzapine, perazine, pimozide, risperidone, sulpiride, zotepine and zuclopenthixol and the pharmacologically active metabolites norclozapine, clozapine N-oxide and 9-hydroxyrisperidone were extracted from plasma using solid-phase extraction and were separated on a Merck LiChroCART column with Superspher 60 RP Select B as the stationary phase. Gradient elution was performed using aqueous ammonium formate and acetonitrile. After screening and identification in the scan mode using the authors' new LC/MS library, the neuroleptics were quantified in the selected-ion mode. The quantification assay was fully validated. It was found to be selective and proved to be linear from sub-therapeutic to over therapeutic concentrations for all analytes. The corresponding reference levels are listed. The accuracy and precision data were within the required limits. The analytes were stable in frozen plasma for at least 1 month. The method was successfully applied to several authentic plasma samples from patients treated or intoxicated with various neuroleptics. The validated LC/MS assay has proved to be appropriate for the isolation, separation, screening, identification and quantification of various neuroleptics in plasma for clinical toxicology and therapeutic drug monitoring purposes.     

Fe3O4-LiMo3Se3 nanoparticle clusters as superparamagnetic nanocompasses

A scaleable chemical approach to functional nanoscale analogues of the magnetic compasses in magnetotactic bacteria is described. LiMo(3)Se(3)-Fe(3)O(4) nanowire-nanoparticle composites were synthesized by a reaction of 3-iodopropionic acid treated LiMo(3)Se(3) nanowire bundles with oleic acid-stabilized Fe(3)O(4) nanoparticles of 2.8, 5.3, and 12.5 nm size in tetrahydrofuran. Transmission electron micrographs show that the composite consists of Fe(3)O(4) nanoparticles attached to the surfaces of the 4-6 nm thick nanowire bundles. UV/vis spectra reveal absorptions from the nanowire (506 nm) and magnetite components (280-450 nm), and IR spectra show characteristic bands for the propionic acid linkers and for the residual oleic acid ligands on the magnetite particles. In the presence of excess oleic acid, the nanocomposites undergo rapid disassembly, suggesting that Fe(3)O(4) nanoparticles are bonded to nanowires via carboxylate groups from the linkers. Ultrasonication of a dispersion of the composite in THF produces individual LiMo(3)Se(3)-Fe(3)O(4) clusters, which are 340 +/- 107 nm long and 20 +/- 5 nm thick, depending on the sonication time and Fe(3)O(4) nanoparticle size. Field cooled and zero-field cooled magnetization measurements reveal that the blocking temperature (T(B) = 100 K) of the clusters with 5.3 nm Fe(3)O(4) is increased as compared to the free nanoparticles (T(B) = 30 K). Directional dipolar interactions in the clusters lead to magnetic anisotropy, which makes it possible to align the clusters in a magnetic field (900 Oe).     

Determination of Mn,Fe, Cu,Zn, and Pb in particulate matter,raw and final materials of a brick factory by radionuclide X-ray fluorescence analysis

Radionuclide X-ray fluorescence method with a Si/Li semiconductor detector and²³⁸Pn exciting source was used in the study of Mn, Fe, Cu, Zn, and Pb content of solid emissions, raw and final materials of a brick factory. From the point of view of metal content, the working environment of the brick factory is safe for workers.     

Purification and analysis of partially alkylated cyclodextrins by liquid and gas chromatography

Complex mixtures of partially alkylated cyclodextrins can be analyzed by both HPLC and high temperature capillary GC. Because of the limited efficiency of LC, suitable analytical and preparative separations can be achieved only with systems of carefully optimized selectivity. Using LC it has been possible to isolate and purify single cyclodextrin species from very complex mixtures of components which contain unreacted hydroxyl groups in addition to the alkoxy groups. Analysis of the reaction mixtures and of fractions taken from LC separations can be performed with advantage by high resolution capillary GC at high temperatures between 300 and 400 °C. The thermal stability of partially alkylated cyclodextrins in high temperature GC is considerably increased by trimethylsilylation of the free hydroxyl groups. Fast atom bombardment mass spectrometry and proton NMR were used to identify species isolated from the preparative LC separations.     

The volume and compressibility change for the formation of transition metal sulfate ion pairs at 25°C

The apparent molal volume and adiabatic compressibilities of some transition metal (Mn²⁺, Co²⁺ Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺) sulfates have been determined at 25°C. Values of to 11.4 cm³-mole^–1 and to 31.3 × 10^–4cm³-mole^–1-bar^–1 at 1 atm were found for the formation of the transition metal sulfate ion pairs. These results are in good agreement with the values obtained from the high-pressure conductance measurements of Fisher et al., Shimizu et al., and Taniguchi et al. The volume and compressibility data indicate that 3.1±0.7 water molecules are lost when transition metals form ion pairs with SO ₄ ^2– . The fractions of inner-sphere ion pairs (20%) estimated in this study are in good agreement with the values obtained from ultrasonic measurements.     

Image analysis in the electron microscopy of cellulose protofibrils II. Digital correlation methods

Electron micrographs of parallel arrays of negatively stained ramie cellulose protofibrils were analyzed using the two-dimensional digital autocorrelation function (ACF). The method is based upon the statistical analysis of images in real space. The ACF shows strong parallel streaks of high correlation, and the lateral distance between adjacent streaks allows the mean interfibrillar distance to be estimated as 3.7 nm. The intensity profile along the streaks shows a weak modulation with peaks occurring at integral multiples of 3 or 6 nm. These results provide direct evidence that there is a regular axial texture in the protofibrils, and corroborate the conclusions previously drawn from optical diffraction analysis. Using the difference vectors found in the ACF it has been possible to reduce the picture noise level by linear integration, thereby obtaining an enhanced image. A preliminary result obtained in this way suggests that the projected protofibril morphology associated with the observed axial periodicity is a ribbon-like zigzag structure. Possible applications of the method for future work are discussed.     

Crystal structure of the 2:1 acetonitrile complex of 18-crown-6

Single crystal X-ray analysis of the 2:1 acetonitrile complex of 18-crown-6 is reported. Crystals of the complex are monoclinic,P2₁/n, witha=9.123(3),b=8.524(3),c=13.676(4) Å, =104.68(3)°, andD _c =1.118 g cm^–3 forZ=2. The complex lies on a center of symmetry, with the crown in theD _3d conformation. Methyl groups of the acetonitrile molecules have weak interactions with the crown oxygen atoms, and are tilted 31.7° from the host's threefold axis. Methyl hydrogen atoms are rotationally disordered about the acetonitrile axis. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82057 (12 pages).     

Method Development for the Speciation of Chromium in River and Industrial Wastewater Using GFAAS

A simple, sensitive and inexpensive method for the speciation of Cr(VI) and Cr(III) in river and industrial wastewater was developed, optimized and validated. Samples were collected, filtered and then chromium species were determined in the filtrate. In the filtrate, total Cr was determined directly by Graphite Furnace Atomic Absorption Spectrometry (GFAAS). A portion of the filtered sample was buffered to pH 6.4, extracted with Amberlite LA-2/MIBK and finally Cr(VI) was determined in the organic extract and Cr(III) in the aqueous phase using GFAAS. The method was evaluated by analysis of the certified reference material, CRM 544, and good accuracy was obtained. The limit of detection for Cr(VI) and Cr(tot)/Cr(III) was found to be 0.30 and 0.08 µg L⁻¹, respectively, and a precision expressed as relative standard deviation of better than 11% was achieved for nine replicates. A number of water samples from the Tinishu Akaki River, Ethiopia, and wastewater samples from a chemical plant in Germany, were analysed. In addition to the GFAAS method, Cr(tot) was also determined using ICP-MS (in CRM 544, lyophilized water, and Tinishu Akaki River water samples) and Cr(tot) and Cr(VI) using UV-VIS spectrophotometry (in CRM 544 and industrial wastewater samples). Good agreement between the different methods was found.