Conformational mobility of thianthrene-5-oxide

[reaction: see text] Data on the apparent dipole moment of thianthrene-5-oxide (1) and (1)H NMR spectra in different solvents support the conformational mobility of 1, which flaps between two limit boat conformations with the sulfinyl group in pseudoequatorial and pseudoaxial positions, respectively. The conformational equilibrium of 1 occurs too fast for the (1)H NMR (500 MHz) time-scale even at -130 degrees C, and the equilibrium constant has not been determined. The apparent dipole moments of 1 in n-hexane and 1,4-dioxane and the (1)H NMR spectra of 1 and the model compounds cis- and trans-thianthrene-5,10-dioxides (2) and thianthrene (5) in different solvents and at various temperatures confirm that the relative position of the conformational equilibrium of 1 is solvent-dependent, and more polar solvents favor the conformation with the sulfoxide group in the pseudoaxial position (1(')(ax)). Variable-temperature (1)H NMR spectra have established the interconversion barrier of trans-2 and confirmed that the conformational equilibrium of cis-2 is strongly displaced toward the conformation with both sulfinyl groups in the pseudoequatorial position. The (1)H NMR data support the transannular interaction of the functional groups in 1 and trans-2.     

UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

Selective, controllable, and reversible aggregation of polystyrene latex microspheres via DNA hybridization

The directed three-dimensional self-assembly of microstructures and nanostructures through the selective hybridization of DNA is the focus of great interest toward the fabrication of new materials. Single-stranded DNA is covalently attached to polystyrene latex microspheres. Single-stranded DNA can function as a sequence-selective Velcro by only bonding to another strand of DNA that has a complementary sequence. The attachment of the DNA increases the charge stabilization of the microspheres and allows controllable aggregation of microspheres by hybridization of complementary DNA sequences. In a mixture of microspheres derivatized with different sequences of DNA, microspheres with complementary DNA form aggregates, while microspheres with noncomplementary sequences remain suspended. The process is reversible by heating, with a characteristic "aggregate dissociation temperature" that is predictably dependent on salt concentration, and the evolution of aggregate dissociation with temperature is observed with optical microscopy.     

Kinetics of octadecyltrimethylammonium bromide self-assembled monolayer growth at mica from an aqueous solution

We have studied the growth kinetics of self-assembled monolayers (SAMs) ofoctadecyltrimethylammonium bromide (C18TAB) on mica below the critical micelle concentration at 22, 30, 40, and 50 degrees C. A combination of atomic force microscopy, contact angle goniometry, and transmission infrared spectroscopy was used to follow the growth processes to determine the rates involved in the growth of a C18TAB SAM on mica. The growth of a SAM consisted of four distinct processes: deposition of adsorbate molecules, growth of a disordered 2D liquid phase, nucleation of islands of an ordered 2D solid phase, and subsequent growth of the solid phase. The rates of these various processes are determined, and the activation energies for several processes were calculated including those for the adsorption onto a bare substrate (20 kJ/mol), adsorption into the saturated liquid phase (100 kJ/mol), and nucleation of islands (0.3 kJ/mol). Despite the small activation barrier to island nucleation, the nucleation rate is qualitatively slow, suggesting that entropic effects dominate the nucleation rate.     

Nutritional parameters of commercially available milk samples by FTIR and chemometric techniques

A chemometric study on the prediction of the main nutritional aspects of milk has been carried out by using fourier transform infrared spectroscopy (FTIR) attenuated total reflectance (ATR) measurements of commercially available milk samples of different types. Whole, semi and skimmed milks, enriched or not with calcium, vitamins or modified by alteration of lipid or sugar composition were considered. After evaluating different strategies for data acquisition and ATR cleaning between samples, hierarchical cluster analysis (HCA) was carried out for classification of samples in order to choose the calibration set. The prediction capabilities of partial least squares (PLS) data treatment were evaluated in order to obtain information about total fat, total protein, total carbohydrates (CH), calories and calcium. On using the mean square error of cross-validation and prediction as control variables, a critical evaluation were made about the calibration set to be used, the spectral range to be considered and the data treatment (PLS-1 or PLS-2) to be performed. By selecting a calibration set of 33 samples the properties of 48 samples were predicted with relative precision of triplicates of 0.062, 0.040 and 0.039% w/v for total fat, protein and carbohydrates, and 0.66 kcal/100 ml for calories, and 2.1 mg of Ca/100 ml. The mean difference (d_x−y) between predicted and actual values and standard deviation of mean differences (s_x−y), were of 0.06 (0.38), 0.03 (0.18) and −0.15 (0.41), being s_x−y values between brackets, for total fat, proteins and carbohydrates, 0.06 (3.8) kcal/100 ml for calories and −4.5 (9) mg/100 ml for calcium.The sensitivity and selectivity of the methodology developed were evaluated on terms of the net analyte signal. Selectivity factors ranging from 2 to 7.6% have been calculated for the five parameters considered.     

Mass distribution in a dynamic sample zone inside a flow injection manifold: modelling integrated conductimetric profiles

A mathematical model for fitting the experimental ICM (integrated conductimetric method) curves developed by the authors in a previous work, is presented for the first time in this study. The proposed model fits the experimental curves with great precision and allows to predict physical dispersion for single-line flow injection system. The correlation of the model’s parameters with typical reactionless FIA peak parameters is also assessed. The IDQ coefficient—a novel dispersion estimator previously reported by the authors—can also be predicted when operational FIA variables are changed. Experimental and modelled profiles are compared as a function of the system’s variables, showing an excellent agreement.     

Terreinol--a novel metabolite from Aspergillus terreus: structure and C labeling

A novel metabolite from Aspergillus terreus, named terreinol, was isolated and its biosynthetic origin was determined by NMR based on the incorporation of [1-¹³C]-d-glucose. The labeling pattern indicated a predominant polyketide biosynthetic origin for this metabolite.     

Peptide backbone folding induced by the C(alpha)-tetrasubstituted cyclic alpha-amino acids 4-amino-1,2-dithiolane-4-carboxylic acid (Adt) and 1-aminocyclopentane-1-carboxylic acid (Ac5c). A joint computational and experimental study

The conformational study of a new group of synthetic peptides containing 4-amino-1,2-dithiolane-4-carboxylic acid (Adt), a cysteine-related achiral residue, has been carried out through a joint application of computational and experimental methodologies. Molecular Dynamics simulations clearly suggest the tendency of this molecule to adopt a gamma-turn conformation in vacuum and help in analyzing the complex and crucial conformational behaviour of the dithiolane ring which appears to preferentially adopt a C(S)-like structure. Electronic structure calculations carried out in solution using the Density Functional Theory also indicate the preservation of the gamma-like folding in apolar solvents and the helix-like one in more polar solvents. A comparison with the achiral 1-aminocycloalkane-1-carboxylic acid (Ac5c) has been carried out using the same computational tools. NMR and IR data on dipeptide derivatives containing the Adt or Ac5c residue show that in chloroform solution all the models prefer a gamma-turn structure, centered at the cyclic residue, stabilized by an intramolecular H-bond, whereas in a more polar solvent, i.e. dimethyl sulfoxide, this folding is not maintained. The experimental conformational studies, extended to N-Boc protected tripeptides, clearly indicate the remarkable tendency of both the five-membered C(alpha)-tetrasubstituted cyclic amino acids Adt and Ac5c to induce the gamma-turn structure also in models able to adopt the beta-bend conformation.     

Efficient chiral discrimination by 77Se NMR

[reaction: see text] Several (77)Se NMR experiments were performed by titrating a sample of selenides with the chiral shift reagent methylbenzylamine (MBA), followed by acquisition of (77)Se NMR spectra. Eventually, we observed the appearance of two anisochronous resonances, with a relatively large separation, from 37 to 56 Hz, corresponding to the formation of the diastereomeric complexes. This methodology avoids derivatization processes, and the studied compound can be easily recovered from the NMR tube.     

A Protein‐Resistant Matrix for Electrochemical Based Recognition Assays

In this work, two well known polymers, carboxymethyl dextran and poly(ethyleneglycol), are used for easily producing a platform for electrochemical affinity assays, avoiding nonspecific adsorption of proteins. In this way, modified electrode surfaces able to bind a recognition agent are constructed through simple and reliable reactions.