Investigating the effect of nanolayered silicates on blend segmental dynamics and minor component relaxation behavior in poly(ethylene oxide)/poly(methyl methacrylate) miscible blends

Polymer–silicate nanocomposites based on poly (ethylene oxide), PEO, poly(methyl methacrylate), PMMA, and sodium montmorillonite clay were fabricated and characterized to investigate the effect of nanolayered silicates on segmental dynamics of PEO/PMMA blends. X‐ray results indicate the formation of an exfoliated morphology in the nanocomposites. At low silicate contents, an enhancement in segmental dynamics of blend nanocomposites and also PEO, minor component in blend, is observed at temperature region below blend glass transition. This result can be attributed to the improvement of the confinement effect of rigid PMMA matrix on the PEO chains by introducing a low amount of layered silicates. On the other hand, at high silicate contents, an enhancement in segmental dynamics of blend nanocomposites and PEO is observed at temperature region above blend glass transition. This behavior could be interpreted based on the reduction of monomeric friction between two polymer components, which can facilitate segmental motions of blend components in nanocomposite systems. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Pseudo-poly(amino acid)s: study on construction and characterization of novel chiral and thermally stable nanostructured poly(ester-imide)s containing different trimellitylimido-amino acid-based diacids and pyromellitoyl-tyrosine-based diol

A new class of chiral and potentially biodegradable poly(ester-imide)s (PEI)s as pseudo-poly(amino acid)s (PAA)s bearing natural amino acids in the main chain was synthesized. In this investigation, N,N′-(pyromellitoyl)-bis-(L-tyrosine dimethyl ester) as a biodegradable optically active diphenol and synthesized trimellitic anhydride-derived dicarboxylic acids containing different natural amino acids such as S-valine, L-methionine, L-leucine, L-isoleucine, and L-phenylalanine were used for direct polyesterification. With the aim of tosyl chloride/pyridine/N,N′-dimethylformamide system as a condensing agent, the new optically active PEIs were obtained in good yields and moderate inherent viscosity up to 0.42 dL/g. The obtained polymers were characterized with FT-IR, ¹H-NMR, X-ray diffraction (XRD), field emission scanning electron microscopy, elemental, and thermogravimetric analysis techniques. These polymers show high solubility in organic solvents, such as N,N′-dimethyl acetamide, N-methyl-2-pyrrolidone, and sulfuric acid at room temperature, and are insoluble in solvents, such as methylene chloride, cyclohexane, and water. Morphology probes showed these pseudo-poly(amino acid)s were noncrystalline and nanostructured polymers. On the basis of thermogravimetric analysis data, such PAAs are thermally stable and can be classified as self-extinguishing polymers. In addition due to the existence of amino acids in the polymer backbones these pseudo-PAAs not only are optically active but also are expected to be biodegradable and therefore could be classified under eco-friendly polymers.     

Production and evaluation of a 67Ga-labeled anti-Ror1 monoclonal antibody in a mouse model of breast cancer

Journal of Radioanalytical and Nuclear Chemistry - Receptor tyrosine kinase Ror1 is widely expressed during embryogenesis but it is absent within most mature tissues. However, expression of Ror1...     

Two‐dimensional prediction of time dependent,turbulent flow around a square cylinder confined in a channel

This paper presents two‐dimensional and unsteady RANS computations of time dependent, periodic, turbulent flow around a square block. Two turbulence models are used: the Launder–Sharma low‐Reynolds number k–ε model and a non‐linear extension sensitive to the anisotropy of turbulence. The Reynolds number based on the free stream velocity and obstacle side is Re=2.2×10⁴. The present numerical results have been obtained using a finite volume code that solves the governing equations in a vertical plane, located at the lateral mid‐point of the channel. The pressure field is obtained with the SIMPLE algorithm. A bounded version of the third‐order QUICK scheme is used for the convective terms. Comparisons of the numerical results with the experimental data indicate that a preliminary steady solution of the governing equations using the linear k–ε does not lead to correct flow field predictions in the wake region downstream of the square cylinder. Consequently, the time derivatives of dependent variables are included in the transport equations and are discretized using the second‐order Crank–Nicolson scheme. The unsteady computations using the linear and non‐linear k–ε models significantly improve the velocity field predictions. However, the linear k–ε shows a number of predictive deficiencies, even in unsteady flow computations, especially in the prediction of the turbulence field. The introduction of a non‐linear k–ε model brings the two‐dimensional unsteady predictions of the time‐averaged velocity and turbulence fields and also the predicted values of the global parameters such as the Strouhal number and the drag coefficient to close agreement with the data. Copyright © 2009 John Wiley & Sons, Ltd.     

Supported Preyssler Nanoparticles in Synthesis of 1,3‐Diaryl‐5‐Spirohexahydropyrimidines

Silica‐supported Preyssler nanoparticles (H₁₄[NaP₅W₃₀O₁₁₀])/SiO₂ are used as a new and recyclable catalyst for the preparation of 1,3‐diaryl‐5‐spirohexahydropyrimidines via a one‐pot condensation of anilines, formaldehyde, and cyclohexanone.     

Application of H-point standard addition method and partial least squares to the simultaneous kinetic-potentiometric determination of hydrazine and phenylhydrazine

Simultaneous determination of hydrazine (HZ) and phenylhydrazine (PHZ) by H-point standard addition method (HPSAM) and partial least squares (PLS) regression was carried out based on kinetic data from novel potentiometry methods. The rate of chloride ion production in the reaction of HZ and PHZ with N-chlorosuccinimide (NCS) was monitored by a chloride ion-selective electrode. The experimental data show the good ability of ion-selective electrodes (ISEs) as detectors not only for the direct determination of chloride ion but also for simultaneous kinetic-potentiometric analysis using HPSAM and PLS methods. The methods are based on the differences observed in the production rate of chloride ions. The results show that simultaneous determination of HZ and PHZ can be performed in concentration ranges of 0.5 - 20.0 and 0.8 - 25.0 microg mL(-1), respectively. The total relative standard error for applying the PLS method to 8 synthetic samples in the concentration ranges of 1.0 - 16.0 microg mL(-1) for HZ and 2.0 - 16.0 microg mL(-1) for PHZ was 3.96. In order for the selectivity of the method to be assessed, we evaluated the effects of certain foreign ions upon the reaction rate and assessed the selectivity of the method. Both methods (PLS and HPSAM) were evaluated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ and PHZ in water samples.     

Semi-empirical and ab initio quantum chemical characterisation of pyridine derivatives as HCl inhibitors of aluminium surface

Quantum chemical methods are becoming ever more prevalent for assessing surface interactions of different molecules using cluster models and semi-empirical, ab initio Hartree–Fock and density functional theory (DFT) studies considering the standard potential energy surfaces. Examination of the efficacy of some pyridine derivatives to counter aluminium corrosion in hydrochloric acid using ab initio and semi-empirical quantum chemical deductions and its comparison with the available experimental data forms the basis of this research. It is believed that the inhibition efficiency has lucid correlation with the total energy of inhibitor molecules and highest occupied molecular orbital energy levels calculated by DFT study methods and thus the adsorption energy for the pyridine on Al₁, Al₅, Al₁₄, Al₁₈ and Al₂₆ clusters are determined to assess the convergence of the results with respect to size of the cluster. Subsequently, Al₂₆ is used for the inhibitor/aluminium cluster interface investigations. Results highlight the reaction between pyridine molecules and appropriately active sites such as corners and steps or kinks and screw dislocations towards which pyridine molecules are attracted as is evident from a three times rise in adsorption energy from (−35) to (−107) kJ mol⁻¹. Therefore, inhibition mechanism is primarily associated with local properties. Interactions take place between the surface defect and the nitrogen group of the pyridine molecule however, the possibility of ion pair formation between protonated pyridine and chloride ion and its influence on the general adsorption of pyridine on aluminium is also examined. The interaction energies of pyridine and aluminium cluster with the natural bond orbital are also reported.     

Stereoselective Hydrolysis of Substituted Cyclopropanedicarboxylates with Pig Liver Esterase

The hydrolysis of the meso-cyclopropane-1,2-dicarboxylates 1a - 3a , 4 , 5a , 6a , and 9 , containing various substituents at C(3), and of the rac-3-phenylcyclopropane-1,2-dicarboxylates 7a , 8a , and 10 with pig liver esterase (PLE) is described. The stereoselectivtty and absolute configurations of the products were determined. An interpretation of results was attempted on the basis of a recent active-site model for PLE.     

Iron Oxychloride/Bovine Serum Albumin Nanosheets as Chemodynamic Therapy Agents

Iron oxychloride (FeOCl) is known for reactive oxygen species (ROS) generation through Fenton chemistry. The activity of FeOCl is preserved in the slightly acidic pH value of the tumor microenvironment (pH 6.5−6.9). Such property can be advantageous in biobased systems, where ROS generation can be modulated in slightly acidic conditions, which is characteristic of the solid tumor microenvironment. In the present study, BSA-stabilized FeOCl nanosheets (NSs) are synthesized and characterized by transmission electron microscope, Fourier transform infrared spectroscopy, zeta potential analysis, dynamic light scattering, and UV–vis spectroscopy. The morphology of the nanoparticles is flake-like, and their hydrodynamic diameter is around 200 nm. MTT, apoptosis assay, and trypan blue staining evaluate the toxicity of FeOCl NSs toward the 4T1 cell line. It is found that the toxicity of the NSs is higher in physiological conditions of solid tumors (pH 6.5, H₂O₂ 100 × 10⁻⁶ m ) than in the conditions of healthy organs (pH 7.4). Specifically, cancer cells are in their late apoptotic stage by more than eight times higher at pH 6.5 than pH 7.4. The toxicity results are in agreement with the in vitro catalytic assay of the NSs. Therefore, the FeOCl NSs can be the building blocks for constructing chemodynamic therapy agents.