Small random perturbations of finite- and infinite-dimensional dynamical systems: Unpredictability of exit times

We apply previous results on the pathwise exponential loss of memory of the initial condition for stochastic differential equations with small diffusion to the problem of the asymptotic distribution of the first exit times from an attracted domain. We show under general hypotheses that the suitably rescaled exit time converges in the zero-noise limit to an exponential random variable. Then we extend the results to an infinite-dimensional case obtained by adding a small random perturbation to a nonlinear heat equation.     

The effect of the anion on the physical properties of trihalide-based N,N-dialkylimidazolium ionic liquids

Low viscosity, high density trihalide-based 1-n-butyl-3-methylimidazolium ionic liquids have been prepared and characterised. Key physical properties (density, conductivity, melting point, refractive index, surface tension and diffusion coefficient) of the ionic liquids have been determined and are compared with those of other 1,3-dialkylimidazolium molten salts. The relationship between anion identity and the physical properties of the ionic liquids under investigation is discussed.     

Hardware components wastes pyrolysis: energy recovery and liquid fraction valorisation

Pyrolysis of hardware components wastes consisting mainly in computers and television components was performed under nitrogen. The degradation products were separated in three fractions, solid, liquid and gaseous. Analyses of the three phases were carried out using gas chromatography (GC), mass spectrometry (MS), thermal analysis and infrared spectroscopy. The energetic content of the gas phase and the economic value of the liquid phase were also determined. The gas fraction produced was rich in light hydrocarbons and hydrogen. Consequently, its calorific value was high and widely sufficient to make the pyrolysis process self-sustained. The main products of the liquid phase were phenol and isopropylphenol (ca. 50–80 wt.%). The presence of Br-based compounds, deriving from the flame retardant employed in hardware components, were also detected. A controlled combustion of the solid phase permitted to obtain the glass fibres unaltered, which can be recycled.     

Structural determination of ruthenium-porphyrin complexes relevant to catalytic epoxidation of olefins

A reproducible synthesis of a competent epoxidation catalyst, [Ru(VI)(TPP)(O)2)] (TPP = tetraphenylporphyrin dianion), starting from [Ru(II)(TPP)(CO)L] (L = none or CH3OH), is described. The molecular structure of the complex was determined by using ab initio X-ray powder diffraction (XRPD) methods, and its solution behavior was in detail investigated by NMR techniques such as PGSE (pulsed field gradient spin-echo) measurements. [Ru(IV)(TPP)(OH)]2O, a reported byproduct in the synthesis of [Ru(VI)(TPP)(O)2], was synthesized in a pure form by oxidation of [Ru(II)(TPP)(CO)L] or by a coproportionation reaction of [Ru(VI)(TPP)(O)2] and [Ru(II)(TPP)(CO)L], and its molecular structure was then determined by XRPD analysis. [Ru(VI)(TPP)(O)2] can be reduced by dimethyl sulfoxide or by carbon monoxide to yield [Ru(II)(TPP)(S-DMSO)2] or [Ru(II)(TPP)(CO)(H2O)], respectively. These two species were characterized by conventional single-crystal X-ray diffraction analysis.     

Photochemistry of perfluoroacyl halides in the presence of O2 and CO

Photolyses of CF₃C(O)X and C₂F₅C(O)X (X=Cl, F) at 254 nm in the presence of O₂ yield the perfluorinated radicals C₂F₅O (C₂) and CF₃O (C₁), respectively. The C₂ radicals decompose to give CF₃ radicals:

C₂F₅O→CF₃+CF₂O

which, in turn, react with O₂ leading to the formation of C₁ radicals. When in addition to O₂, CO is present, the C₁ radicals react with it leading to its catalytic oxidation to CO₂. The trioxide CF₃OC(O)O₃C(O)OCF₃ was observed following the photolysis of all four halides in the presence of O₂ and CO.

The other radical partners coming from the initial step in the photolysis (XC(O)) as well as the products of their reaction with O₂ (XC(O)O_y, y=1, 2) do not react with CO but when X=F they lead to the formation of a new stable peroxy molecule with the formula CF₃OC(O)O₂C(O)F. Some of the properties of this new molecule, its stability and its IR features are presented in this work.     

Electrospray mass and tandem mass spectrometry of homologous and isomeric singly, doubly, triply and quadruply charged cationic ruthenated meso-(phenyl)m-(meta- and para-pyridyl)n (m + n = 4) macrocyclic porphyrin complexes

Ten homologous or isomeric singly, doubly, triply and quadruply charged cationic macrocyclic complexes I-Va, bn+ (n = 1-4) formed by the coordination of [Ru(bipy)2Cl]+ to the pyridyl N-atoms of a series of meso-(phenyl)m-(meta or para-pyridyl)n-porphyrins (m + n = 4) were transferred to the gas phase and structurally characterized by electrospray ionization (ESI) mass (MS) and tandem mass (MS/MS) spectrometry. Previously known to be stable in solution and in the solid state, I-Va, bn+ are found to constitute also a new class of stable, long-lived multiply charged gas-phase ions with spatially separated charge sites. Increasing intramolecular electrostatic repulsion from Ia, b+ to IVa, b3+ facilitates in-source and tandem collision-induced dissociation (CID). However, for the quadruply charged ions Va, b4+, electrostatic repulsion is alleviated mainly by ion pairing with the CF3SO3- counterion forming the salt clusters [Va,b/CF3SO3]3+ and [Va,b/(CF3SO3)2]2+ with reduced charge states. Ion-pairing that yields [IVa,b/CF3SO3]2+ is also observed as a minor ESI process for the triply charged ions IVa, b3+. The gaseous ions I-Va, bn+ (n = 2, 3 or 4) dissociate by sequential 'charge partitioning' with the formation of two cationic fragments by the release of [Ru(bipy)2Cl]+. The meta (a) and para (b) isomers and the positional isomers II2+ and III2+ display nearly identical ESI-MS and ESI-MS/MS spectra. ESI-MS/MS of I-Va, bn+ shows that the Ru-py(P) is, intrinsically, the weakest bond since this bond breaks preferentially upon CID.     

Total synthesis of (-)-microcarpalide, a novel microfilament disrupting metabolite

The stereoselective total synthesis of (-)-microcarpalide, a recently discovered 10-membered lactone of fungal origin displaying a remarkable disrupting action on actin microfilaments, was accomplished by using ring-closing metathesis (RCM) as the key step for the formation of the medium-sized ring. The diene ester required for the macrocyclization reaction was assembled via DCC-mediated esterification of two suitable partners, each bearing a terminal alkene group. The alcohol fragment was synthesized from n-bromohexane through a seven-step sequence entailing two consecutive stereoselective homologations of chiral boronic esters as strategic transformations for the sequential insertion of the two stereocentres with the final S absolute configuration, using (+)-pinanediol as the chiral director; final elaboration to the desired C(11) framework envisaged treatment with an allyl Grignard reagent and oxidative cleavage of the boronic scaffold. In contrast, the acidic fragment was prepared in ten steps from d-tartaric acid, whose C(4) backbone was elongated to the required C(7) skeleton by means of two distinct Swern-Wittig oxidation-homologation sequences.     

Solid-state photodimerization of steroid enones

Androst-4-ene-3,17-dione (1) and 17alpha-methyltestosterone (2) are dimerized in the solid-state by UV radiation. These substances were selected by a search in the CSD among the steroid enones presenting in the crystalline state an intermolecular short contact between a hydrogen alpha to a carbonyl group and the oxygen of an enone system. Dimerization occurs by transfer of the hydrogen to the oxygen and connection between the two involved carbons. Androst-4-ene-3,17-dione (1) affords dimer 3 and trimer 4, both formed by connection of the C-16 of a molecule with the C-3 of a near one. Irradiation of 17alpha-methyltestosterone (2) gives the isomeric trienones 5 and 6. These compounds are reasonably formed by dehydration of unisolated intermediate products 7 and/or 8 obtained by coupling of two molecules through a linkage between the C-2 and the C-3' carbons. The formation mechanisms of the photoproducts are satisfactory explained on the basis of the molecular arrangement of the monomers in the crystal state. Modeling of the dimeric molecules was done using molecular mechanics calculations. A single-crystal X-ray of the dimer of androst-4-ene-3,17-dione confirms the structural interpretation of spectral data. The conformer found in the solid-state agrees well with the results of molecular mechanics calculations.     

Synthesis, structure and conformation of partially-modified retro- and retro-inverso psi[NHCH(CF3)]Gly peptides

Partially modified retro- (PMR) and retro-inverso (PMRI) psi[NHCH(CF(3))]Gly peptides, a conceptually new class of peptidomimetics, have been synthesized in wide structural diversity and variable length by aza-Michael reaction of enantiomerically pure alpha-amino esters and peptides with enantiomerically and geometrically pure N-4,4,4-trifluorocrotonoyl-oxazolidin-2-ones. The factors underlying the observed moderate to good diastereocontrol have been investigated. The conformations of model PMR-psi[NHCH(CF(3))]Gly tripeptides have been studied in solution by (1)H NMR spectroscopy supported by MD calculations, as well as in the solid-state by X-ray diffraction. Remarkable stability of turn-like conformations, comparable to that of parent malonyl-based retropeptides, was evidenced, as a likely consequence of two main factors: 1) severe torsional restrictions about sp(3) bonds in the [CO-CH(2)-CH(CF(3))-NH-CH(R)-CO] module, which is biased by the stereoelectronically demanding CF(3) group and the R side chain; 2) formation of nine-membered intramolecularly hydrogen-bonded rings, which have been clearly detected both in CHCl(3) solution and in some crystal structures. The former factor seems to be more important, as turn-like conformations were found in the solid-state even in the absence of intramolecular hydrogen bonding. The relative configuration of the -C*H(CF(3))NHC*H(R)- stereogenic centers has a major effect on the stability of the turn-like conformation, which seems to require a syn stereochemistry. X-ray diffraction and ab initio computational studies showed that the [-CH(CF(3))NH-] group can be seen as a sort of hybrid between a peptide bond mimic and a proteolytic transition state analogue, as it combines some of the properties of a peptidyl -CONH- group (low NH basicity, CH(CF(3))-NH-CH backbone angle close to 120 degrees, C-CF(3) bond substantially isopolar with the C=O) with some others of the tetrahedral intermediate [-C(OX)(O(-))NH-] involved in the protease-mediated hydrolysis reaction of a peptide bond (high electron density on the CF(3) group, tetrahedral backbone carbon).     

Progress,highlights and perspectives on NiO in perovskite photovoltaics

The power conversion efficiency (PCE) of NiO based perovskite solar cells has recently hit a record 22.1% with a hybrid organic–inorganic perovskite composition and a PCE above 15% in a fully inorganic configuration was achieved. Moreover, NiO processing is a mature technology, with different industrially attractive processes demonstrated in the last few years. These considerations, along with the excellent stabilities reported, clearly point towards NiO as the most efficient inorganic hole selective layer for lead halide perovskite photovoltaics, which is the topic of this review. NiO optoelectronics is discussed by analysing the different doping mechanisms, with a focus on the case of alkaline and transition metal cation dopants. Doping allows tuning the conductivity and the energy levels of NiO, improving the overall performance and adapting the material to a variety of perovskite compositions. Furthermore, we summarise the main investigations on the NiO/perovskite interface stability. In fact, the surface of NiO is commonly oxidised and reactive with perovskite, also under the effect of light, thermal and electrical stress. Interface engineering strategies should be considered aiming at long term stability and the highest efficiency. Finally, we present the main achievements in flexible, fully printed and lead-free perovskite photovoltaics which employ NiO as a layer and provide our perspective to accelerate the improvement of these technologies. Overall, we show that adequately doped and passivated NiO might be an ideal hole selective layer in every possible application of perovskite solar cells.

The power conversion efficiency of NiO based perovskite solar cells has recently hit a record 22.1%. Here, the main advances are reviewed and the role of NiO in the next breakthroughs is discussed.