Micro-BLMs on highly ordered porous silicon substrates: rupture process and lateral mobility

In a recent paper, we hypothesized that the continuous increase in membrane conductance observed for nano-BLMs is the result of an independent rupturing of single membranes or membrane patches covering the pores of the porous material. To prove this hypothesis, we prepared micro-BLMs on porous silicon substrates with a pore size of 7 mum. The upper surface of the silicon substrate was coated with a gold layer, followed by the chemisorption of 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol (DPPTE) and subsequent addition of a droplet of 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) dissolved in n-decane. The lipid membranes were fluorescently labeled and investigated by means of fluorescence microscopy and impedance spectroscopy. Impedance spectroscopy revealed the formation of pore-suspending bilayers with high membrane resistance. Increases in membrane capacitance and membrane conductance were observed. This increase in membrane conductance could be unambiguously related to the individual rupturing of membranes suspending the pores of the porous material as visualized by means of fluorescence microscopy. Moreover, by fluorescence recovery after photobleaching experiments, we investigated the lateral mobility of the lipids within the micro-BLMs leading to a mean effective diffusion coefficient of Deff = (14 +/- 1) microm2/s.     

Oligonuclear copper complexes of a bioinspired pyrazolate-bridging ligand: synthesis, structures, and equilibria in solution

The synthesis of a new bioinspired dinucleating ligand scaffold based on a bridging pyrazolate with appended bis[2-(1-methylimidazolyl)methyl]aminomethyl chelate arms is reported. This ligand forms very stable copper complexes, and a series of different species is present in solution depending on the pH. Interconversions between these solution species are tracked and characterized spectroscopically, and X-ray crystallographic structures of three distinct complexes that correspond to the species present in solution from acidic to basic pH have been determined. Overall, this provides a comprehensive picture of the copper coordination chemistry of the new ligand system. Alterations in the protonation state are accompanied by changes in nuclearity and pyrazolate binding, which cause pronounced changes in color and magnetic properties. Antiferromagnetic coupling between the copper(II) ions is switched on or off depending on the pyrazole binding mode.     

Complete phase behavior of the symmetrical colloidal electrolyte

We computed the complete phase diagram of the symmetrical colloidal electrolyte by means of Monte Carlo simulations. Thermodynamic integration, together with the Einstein-crystal method, and Gibbs-Duhem integration were used to calculate the equilibrium phase behavior. The system was modeled via the linear screening theory, where the electrostatic interactions are screened by the presence of salt in the medium, characterized by the inverse Debye length, kappa (in this work kappasigma=6). Our results show that at high temperature, the hard-sphere picture is recovered, i.e., the liquid crystallizes into a fcc crystal that does not exhibit charge ordering. In the low temperature region, the liquid freezes into a CsCl structure because charge correlations enhance the pairing between oppositely charged colloids, making the liquid-gas transition metastable with respect to crystallization. Upon increasing density, the CsCl solid transforms into a CuAu-like crystal and this one, in turn, transforms into a tetragonal ordered crystal near close packing. Finally, we have studied the ordered-disordered transitions finding three triple points where the phases in coexistence are liquid-CsCl-disordered fcc, CsCl-CuAu-disordered fcc, and CuAu-tetragonal-disordered fcc.     

Clustering of Lennard-Jones particles in water: temperature and pressure effects

While the hydrophobic effect is, for many systems, one of the most relevant interactions, it may be said that in the case of biological systems this effect becomes of determinant importance. Although the matter has been analyzed extensively, certain aspects are yet to be elucidated. Hence, the study on the behavior of the hydrophobic effect with temperature, and particularly with pressure deserves further investigation; model systems may help us in the task. We have analyzed the behavior of Lennard-Jones particles in water by means of molecular dynamics simulation under different conditions of size, concentration, temperature, and pressure. Following the formation of particle aggregates we can observe an increase of the hydrophobic effect with temperature and a strong weakening of the effect at high pressures. The results agree with the experimental evidence and show the ability of molecular dynamics simulation to account for the behavior of nonpolar substances under different conditions, provided that the intermolecular interactions used are adequate.     

Solid phase extraction, multidimensional gas chromatography mass spectrometry determination of four novel aroma powerful ethyl esters. Assessment of their occurrence and importance in wine and other alcoholic beverages

A method for the quantitative determination of four powerful aromatic ethyl esters recently identified in some wines has been developed, validated and applied to the determination of these compounds in different samples of wine, whisky and brandy. Ethyl 2-, 3-, and 4-methylpentanoate and ethyl cyclohexanoate are extracted from 100ml of sample by solid phase extraction (SPE) on a 200mg LiChrolut EN bed. Major compounds are eliminated by rinsing with a water-methanol (50:50) solution containing 1% sodium bicarbonate, and analytes are eluted with 1.5ml of dichloromethane. Fifty microlitres of this extract are then injected in a multidimensional gas chromatography-mass spectromety (GC-GC-MS) system. Recoveries in the SPE are quantitative. Method repeatability is satisfactory (5-12% for a 5-10ngl(-1) level, and less than 7% for 25-50ngl(-1) level), the method linearity holds along the whole range of occurrence of analytes (2-2700ngl(-1)), and the signal is independent on the matrix. Method detection limits are below 1ngl(-1) in all cases. Results suggest that these compounds are formed by the slow esterification with ethanol of the corresponding acids formed by different microorganisms. The levels of these compounds are above the corresponding thresholds in most samples of aged wines or distillates, but are particularly high in some sweet wines, whiskeys and brandies where they may constitute the most important contributors to the sweet-fruity notes reaching concentrations up to 85-350 times higher than the corresponding odor thresholds.     

Adsorption of volatile organic compounds onto carbon nanotubes, carbon nanofibers, and high-surface-area graphites

The adsorption of different alkanes (linear and cyclic), aromatics, and chlorohydrocarbons onto different nonmicroporous carbons--multiwalled carbon nanotubes (CNTs), carbon nanofibers (CNFs), and high-surface-area graphites (HSAGs)--is studied in this work by inverse gas chromatography (IGC). Capacity of adsorption was derived from the isotherms of adsorption, whereas thermodynamic properties (enthalpy of adsorption, surface free energy characteristics) have been determined from chromatographic retention data. HSAGs present the highest adsorption capacity, followed by CNTs and CNFs (although CNTs present an intermediate surface area between the two HSAG studied). Among the different adsorbates tested, benzene exhibits the highest adsorption capacity, and the same trend is observed in the enthalpy of adsorption. From surface free energy data, enthalpies of adsorption of polar compounds were divided into dispersive and specific contributions. The interactions of cyclic (benzene and cyclohexane) and chlorinated compounds (trichloroethylene, tetrachloroethylene, and chloroform) with the surfaces are mainly dispersive over all the carbons tested, CNTs being the material with the highest dispersive contribution, as was deduced also from the entropy parameter. Adsorption parameters were correlated with morphological and chemical properties of the materials.     

Photophysics of a xanthenic derivative dye useful as an "on/off" fluorescence probe

The photophysical behavior of a new fluorescein derivative has been explored by using absorption and steady-state and time-resolved fluorescence measurements. The influence of ionic strength, as well as total buffer concentration, on both the absorbance and fluorescence has been investigated. The apparent acidity constant of the dye determined by absorbance is almost independent of the added buffer and salt concentrations. A semiempirical model is proposed to rationalize the variations in the apparent pKa values. The excited-state proton-exchange reaction around the physiological pH becomes reversible upon addition of phosphate buffer, inducing a pH-dependent change of the steady-state fluorescence and decay times. Fluorescence decay traces, collected as a function of total buffer concentration and pH, were analyzed by global compartmental analysis, yielding the following values of the rate constants describing excited-state dynamics: k01 = 1.29 x 10(10) s(-1), k02 = 4.21 x 10(8) s(-1), k21 approximately 3 x 10(6) M(-1) s(-1), k12B= 6.40 x 10(8) M(-1) s(-1), and k21B = 2.61 x 10(7) M(-1) s(-1). The decay rate constant values of k01, k21, k21B, along with the low molar absorption coefficient of the neutral form, mean that coupled decays are practically monoexponential at buffer concentrations higher than 0.02 M and any pH. Thus, the pH and buffer concentration can modulate the main lifetime of the dye.     

Mannan-Based Nanodiagnostic Agents for Targeting Sentinel Lymph Nodes and Tumors

Early detection of metastasis is crucial for successful cancer treatment. Sentinel lymph node (SLN) biopsies are used to detect possible pathways of metastasis spread. We present a unique non-invasive diagnostic alternative to biopsy along with an intraoperative imaging tool for surgery proven on an in vivo animal tumor model. Our approach is based on mannan-based copolymers synergistically targeting: (1) SLNs and macrophage-infiltrated solid tumor areas via the high-affinity DC-SIGN (dendritic cell-specific intercellular adhesion molecule-3-grabbing non-integrin) receptors and (2) tumors via the enhanced permeability and retention (EPR) effect. The polymer conjugates were modified with the imaging probes for visualization with magnetic resonance (MR) and fluorescence imaging, respectively, and with poly(2-methyl-2-oxazoline) (POX) to lower unwanted accumulation in internal organs and to slow down the biodegradation rate. We demonstrated that these polymer conjugates were successfully accumulated in tumors, SLNs and other lymph nodes. Modification with POX resulted in lower accumulation not only in internal organs, but also in lymph nodes and tumors. Importantly, we have shown that mannan-based polymer carriers are non-toxic and, when applied to an in vivo murine cancer model, and offer promising potential as the versatile imaging agents.     

New 3-Ethynylaryl Coumarin-Based Dyes for DSSC Applications: Synthesis,Spectroscopic Properties,and Theoretical Calculations

A set of 3-ethynylaryl coumarin dyes with mono, bithiophenes and the fused variant, thieno [3,2-b] thiophene, as well as an alkylated benzotriazole unit were prepared and tested for dye-sensitized solar cells (DSSCs). For comparison purposes, the variation of the substitution pattern at the coumarin unit was analyzed with the natural product 6,7-dihydroxycoumarin (Esculetin) as well as 5,7-dihydroxycomarin in the case of the bithiophene dye. Crucial steps for extension of the conjugated system involved Sonogashira reaction yielding highly fluorescent molecules. Spectroscopic characterization showed that the extension of conjugation via the alkynyl bridge resulted in a strong red-shift of absorption and emission spectra (in solution) of approximately 73–79 nm and 52–89 nm, respectively, relative to 6,7-dimethoxy-4-methylcoumarin (λ_abs = 341 nm and λ_em = 410 nm). Theoretical density functional theory (DFT) calculations show that the Lowest Unoccupied Molecular Orbital (LUMO) is mostly centered in the cyanoacrylic anchor unit, corroborating the high intramolecular charge transfer (ICT) character of the electronic transition. Photovoltaic performance evaluation reveals that the thieno [3,2-b] thiophene unit present in dye 8 leads to the best sensitizer of the set, with a conversion efficiency (η = 2.00%), best V_OC (367 mV) and second best J_sc (9.28 mA·cm⁻²), surpassed only by dye 9b (J_sc = 10.19 mA·cm⁻²). This high photocurrent value can be attributed to increased donor ability of the 5,7-dimethoxy unit when compared to the 6,7 equivalent (9b).     

Enantioselective Catalytic Crotylboration Based Syntheses of the C(7)–C(18(20)) Fragments of Polyketides Isolated from Streptomyces gramineus

A general modular enantioselective synthetic approach to the C(7)–C(18) and the C(7)–C(20) fragment belonging to E-492, actinofuranone A, and JBIR-108 was developed. The crucial synthetic step relies on highly enantioselective crotylboration of aldehydes catalyzed by a chiral TRIP PA giving rise to highly enantioenriched terminal alkenes (86 and 88 % ee on the preparative scale). The alkenes were subsequently converted into the title products. Further important synthetic steps included Ru-catalyzed alkene cross-metathesis and Suzuki coupling reactions. The approach consists of five synthetic steps starting from easily available aldehydes and other reaction partners.