HPLC direct purity assay using ultra-purified materials as primary standards

Reference materials certified for purity are essential to ensure harmonization of analytical measurements. LGC is currently certifying these materials using an indirect multi-method approach quantifying impurities: Related substances using high-performance liquid chromatography, gas chromatography (GC), differential scanning calorimetry; Residual solvents using headspace GC coupled to mass spectrometry; Inorganic content using ashing, acid digest ion couple plasma mass spectrometry or thermogravimetric analysis; Water using oven coulometric Karl Fischer/direct addition coulometric Karl Fischer. Related substances are not straightforward to quantify without an appropriate standard due to possible difference in response factor for the impurity relative to the main compound. In this article, existing LGC RMs certified for purity were purified further using semi-preparative HPLC. These ultra-purified organic substances were virtually free of related substances making their purity assessment faster and more straightforward, i.e., no need to identify impurities and subsequently quantify them. After characterization, these ultra-purified standards were used as calibrants to determine directly the mass fraction of the analyte in the original CRM using exact matching single-point HPLC calibration. This new approach opens the possibility of certifying the purity of low purity substances with a relative small uncertainty without the need of identifying the impurities present in the sample.     

Solvent effect on the singlet excited-state dynamics of 5-fluorouracil in acetonitrile as compared with water

The excited-state dynamics of 5-fluorouracil in acetonitrile has been investigated by femtosecond fluorescence upconversion spectroscopy in combination with quantum chemistry TD-DFT calculations ((PCM/TD-PBE0). Experimentally, it was found that when going from water to acetonitrile solution the fluorescence decay of 5FU becomes much faster. The calculations show that this is related to the opening of an additional decay channel in acetonitrile solution since the dark n/pi* excited state becomes near degenerate with the bright pi/pi* state, forming a conical intersection close to the Franck-Condon region. In both solvents, a S1-S0 conical intersection, governed by the out-of-plane motion of the fluorine atom, is active, allowing an ultrafast internal conversion to the ground state.     

Membrane inlet mass spectrometry of volatile organohalogen compounds in drinking water.

The analysis of organic pollutants in drinking water is a topic of wide interest, reflecting on public health and life quality. Many different methodologies have been developed and are currently employed in this context, but they often require a time-consuming sample pre-treatment. This step affects the recovery of the highly volatile compounds. Trace analysis of volatile organic pollutants in water can be performed 'on-line' by membrane inlet mass spectrometry (MIMS). In MIMS, the sample is separated from the vacuum of the mass spectrometer by a thin polymeric hollow-fibre membrane. Gases and organic volatile compounds diffuse and concentrate from the sample into the hollow-fibre membrane, and from there into the mass spectrometer. The main advantages of the technique are that no pre-treatment of samples before analysis is needed and that it has fast response times and on-line monitoring capabilities. This paper reports the set-up of the analytical conditions for the analysis of volatile organohalogen compounds (chloroform, bromoform, bromodichloromethane, chlorodibromomethane, tetrachloroethylene, trichloroethylene, 1,1,1-trichloroethane, and carbon tetrachloride). Linearity of response, repeatability, detection limits, and spectra quality are evaluated.     

Advancing understanding of actinide(iii) (Ac,Am, Cm) aqueous complexation chemistry

The positive impact of having access to well-defined starting materials for applied actinide technologies – and for technologies based on other elements – cannot be overstated. Of numerous relevant 5f-element starting materials, those in complexing aqueous media find widespread use. Consider acetic acid/acetate buffered solutions as an example. These solutions provide entry into diverse technologies, from small-scale production of actinide metal to preparing radiolabeled chelates for medical applications. However, like so many aqueous solutions that contain actinides and complexing agents, 5f-element speciation in acetic acid/acetate cocktails is poorly defined. Herein, we address this problem and characterize Ac³⁺ and Cm³⁺ speciation as a function of increasing acetic acid/acetate concentrations (0.1 to 15 M, pH = 5.5). Results obtained via X-ray absorption and optical spectroscopy show the aquo ion dominated in dilute acetic acid/acetate solutions (0.1 M). Increasing acetic acid/acetate concentrations to 15 M increased complexation and revealed divergent reactivity between early and late actinides. A neutral Ac(H₂O)₆₍₁₎(O₂CMe)₃₍₁₎ compound was the major species in solution for the large Ac³⁺. In contrast, smaller Cm³⁺ preferred forming an anion. There were approximately four bound O₂CMe¹⁻ ligands and one to two inner sphere H₂O ligands. The conclusion that increasing acetic acid/acetate concentrations increased acetate complexation was corroborated by characterizing (NH₄)₂M(O₂CMe)₅ (M = Eu³⁺, Am³⁺ and Cm³⁺) using single crystal X-ray diffraction and optical spectroscopy (absorption, emission, excitation, and excited state lifetime measurements).

Actinide complexation from aqueous acetic acid/acetate buffered solutions is described. The number of water ligands was directly correlated with the acetate concentration and characterized by X-ray absorption and optical spectroscopy.     

Synthesis and characterization of silica/poly (methyl methacrylate) nanocomposite latex particles through emulsion polymerization using a cationic azo initiator

Following a previous work (J. L. Luna-Xavier et al., Colloid Polym. Sci.279, 947 (2001)), silica-poly (methyl methacrylate) (PMMA) nanocomposite latex particles have been synthesized in emulsion polymerization using a cationic initiator, 2,2'-azobis (isobutyramidine) dihydrochloride (AIBA), and a nonionic polyoxyethylenic surfactant (NP30). Silica beads with diameters of 68, 230, and 340 nm, respectively, were used as the seed. Coating of the silica particles with PMMA was taking place in situ during polymerization, resulting in the formation of colloidal nanocomposites with a raspberry-like or a core-shell morphology, depending on the size and nature of the silica beads. The amount of surface polymer was quantified by means of ultracentrifugation and thermogravimetric analysis as extensively described in the first article of the series (see above reference). The influence of some determinant parameters such as the pH of the suspension, the initiator, silica, monomer, or surfactant concentration on the amount of coating polymer and on the efficiency of the coating reaction was investigated in details and discussed in light of the physicochemical properties of the seed mineral. Electrostatic attraction between the positive end groups of the macromolecules and the inorganic surface proved to be the driving force of the polymer assembly on the seed surface at high pH, while polymerization in adsorbed surfactant bilayers (so-called admicellar polymerization) appeared to be the predominant mechanism of coating at lower pH. Optimal conditions have been found to reach high encapsulation efficiencies and to obtain a regular polymer layer around silica.     

Mapping the cooperativity pathways in spin crossover complexes

Crystal packing energy calculations are applied to the [Fe(PM-L)₂(NCS)₂] family of spin crossover (SCO) complexes (PM-L = 4-substituted derivatives of the N-(2-pyridylmethylene)-4-aminobiphenyl ligand) with the aim of relating quantitatively the cooperativity of observed SCO transitions to intermolecular interactions in the crystal structures. This approach reveals a linear variation of the transition abruptness with the sum of the magnitudes of the interaction energy changes within the first molecular coordination sphere in the crystal structure. Abrupt transitions are associated with the presence of significant stabilising and destabilising changes in intermolecular interaction energies. While the numerical trend established for the PM-L family does not directly extend to other classes of SCO complex in which the intermolecular interactions may be very different, a plot of transition abruptness against the range of interaction energy changes normalised by the largest change shows a clustering of complexes with similar transition abruptness. The changes in intermolecular interactions are conveniently visualised using energy difference frameworks, which illustrate the cooperativity pathways of an SCO transition.

The abruptness of spin crossover (SCO) is related to intermolecular energy changes occurring over the course of an SCO transition. Crossover is abrupt when SCO-induced strain is accommodated synergistically in a few key interactions.     

Cyan fluorescent protein: molecular dynamics, simulations, and electronic absorption spectrum

The dynamics and electronic absorption spectrum of enhanced cyan fluorescent protein (ECFP), a mutant of green fluorescent protein (GFP), have been studied by means of a 1 ns molecular dynamics (MD) simulation. The two X-ray conformations A' and B' of ECFP were considered. The chromophore was assumed to be neutral, and all titratable residues were taken in their standard protonation state at neutral pH. The protein was embedded in a box of water molecules (and counterions). The first result is that the two conformations A' and B' are found to be stable all along the simulation. Then, an analysis of the hydrogen-bond networks shows strong differences between the two conformations in the surroundings of the nitrogen atom of the indolic part of the chromophore. This is partly due to the imperfection in the beta barrel near the His148 residue, which allows the access of one solvent molecule inside the protein in conformation A'. Finally, quantum mechanical calculations of the electronic transition energies of the chromophore in the charge cloud of the protein and solvent water molecules were performed using the TDDFT method on 160 snapshots extracted every 5 ps of the MD trajectories. It is found that conformations A' and B' exhibit very similar spectra despite different H-bond networks involving the chromophore. This similarity is related to the weak charge transfer involved in the electronic transition and the weak electrostatic field created by ECFP near the chromophore, within the hypotheses made in the present simulation.     

Design and synthesis of a Mn(III)-porphyrin steroid conjugate used as a new cleavable affinity label: on the road to semi-synthetic catalytic antibodies

We here report the synthesis of a novel porphyrin-steroid conjugate which was designed for the site-specific incorporation of a non-natural heme cofactor at the binding site of an anti-estradiol antibody, in order to get a semi-synthetic catalytic antibody with a monooxygenase-like activity. The general strategy involved a coupling reaction between a testosterone modified by an arm bearing a cleavable disulfide bridge and a meso-tetraarylporphyrin bearing two successive meso-ortho-substituted-phenyl rings, α,α-5,10-bis-[{o-(2-carboxyethyl)carboxamido}phenyl]-15,20-diphenyl-porphyrin. The final porphyrin-steroid conjugate was successfully purified and fully characterized, and was subsequently metalated with manganese acetate. The metalloporphyrin moiety will be used to be coupled with the antibody to generate a new biocatalyst with monooxygenase-like activities.     

Atomic force microscopy study of lymphoblastoid cells under 50-Hz 2-mT magnetic field irradiation

Received: 18 December 1997/Accepted: 5 January 1998     

Towards large amounts of Janus nanoparticles through a protection-deprotection route

Janus silica nanoparticles, regioselectively functionalized by two different chemical groups, were synthesized through a multistep procedure based on the use of a polystyrene nodule as a protecting mask.