Degradation Kinetics of an Epoxy/Cycloaliphatic Amine Resin Under Isothermal and Non-isothermal Conditions

A study of an epoxy-cycloaliphatic amine system has been realized using a thermogravimetric technique (TG). Isothermal and non-isothermal (dynamic) methods were employed to determine the kinetic data of this system. Five methods were used for determining the activation energies of this system in the dynamic heating experiments. In two of them (Flynn-Wall-Ozawa, and Kissinger) it is not necessary to have a prior knowledge of the reaction mechanism of the degradation behaviour for this system. In the other ones (Coats and Redfern, Horowitz and Metzger, and Van Krevelen et al.) it is necessary to know this reaction mechanism, besides Criado et al. method was used for determining it. The results have shown that good agreement between the activation energies obtained from all methods can be achieved if it is assumed that the degradation behaviour of this system is of sigmoidal-rate type. This revised version was published online in August 2006 with corrections to the Cover Date.     

Propane/propylene separation by selective olefin adsorption on Cu/SBA-15 mesoporous silica

Samples of mesoporous silica, SBA-15, were prepared under hydrothermal conditions and Cu cations were incorporated into the framework by two different impregnation techniques. The corresponding adsorption/desorption isotherms of propylene, propane, and N₂ were measured to evaluate the material's effectiveness in the separation of propane/propylene mixtures. Adsorption uptake of propylene increased and that of propane decreased in Cu containing samples as compared to the uptakes observed in undoped SBA-15 samples. It was demonstrated that the presence of Cu atoms in the adsorbent lattice led to a greater selectivity towards propylene. Furthermore, the highest level of Cu(I) were obtained in samples prepared by equilibrium impregnation, which in turn improved the olefin/paraffin uptake ratio. Under some working conditions, the amount of propylene adsorbed in selected samples is totally reversible while propane uptake was negligible.     

Chromatographic and spectroscopic investigation of the associative changes with the selected higher fatty alcohols

An attempt was made to compare usefulness of the ir spectroscopic technique with paper chromatography in the investigations concerning self-association of higher fatty alcohols. A conclusion was drawn that only the complementary application of both analytical methods better enabled to trace the establishing of association equilibria in the given experimental conditions.     

Estimation of diuretic drugs in biological fluids by HPLC

Summary This critical review of different methods proposed for the determination and screening of diuretics is directed mainly, because of its potential application, towards highperformance liquid chromatography.     

Osmotic behavior of a Nafion membrane in methanol-water electrolyte solutions

In this paper, an experimental study was carried out in order to investigate the osmotic transport of methanol-water electrolyte solutions through a Nafion membrane. The experimental data indicated that the Nafion membrane showed the typical anomalous osmotic behavior of charged membranes. The influence of some relevant parameters, such as electrolyte concentration difference, weight fraction of methanol on solution, and nature of cation was considered. The results showed that the osmotic volume flow was decreased with the presence of methanol on solvent, but did not alter the anomalous osmotic behavior of the membrane.     

Kinetic study of the reaction of CH3O with Br and Br2

The title reactions have been studied at room temperature by applying the discharge flow method coupled with laser induced fluorescence detection of methoxy radicals and resonance fluorescence detection of bromine atoms. The following rate constants were determined: CH₃O + Br Õ products (1) k ₁ (298 K) = (3.4 ± 0.4 (1)) × 10¹³ cm³ mol^-1 s^-1, CH₃O + Br₂ Õ products (2) k ₂ (298 K) £ 5 × 10⁸ cm³ mol^-1 s^-1.     

Rapid and simple method for determination of Nepsilon-(carboxymethyl)lysine and Nepsilon-(carboxyethyl)lysine in urine using gas chromatography/mass spectrometry

A new procedure was developed to determine in urine the concentrations of N(epsilon)-(carboxymethyl)lysine (CML) and N(epsilon)-(carboxyethyl)lysine (CEL), the major products of oxidative modification of glycated proteins, to assess levels of oxidative stress in physiological systems. The urine samples were acetonitrile-deproteinized, then derivatized by ethylchloroformate, and N(O,S)-ethoxycarbonyl ethyl esters of amino acids were analysed by isotope dilution gas chromatography/mass spectrometry. Recovery averaged 89%. Linearity was excellent (r = 0.998-0.999) in the 0.5-25 micromol/L range for CML and CEL. The limit of detection of this assay was 0.1 micromol/L (corresponding to 0.20 pmol of CML or CEL on column). Intra-day and inter-day precisions were likewise excellent, with relative standard deviations <4.63 and <6.15%, respectively. Accuracy of CML and CEL determination (15 micromol/L) was 2.9 and 5.9% of the estimated theoretical value. The time from obtaining the urine sample to determination of the concentration from the chromatographic peak was 80 min or less. This method is sensitive, reproducible, accurate, relatively cheap and very simple. It can be useful for laboratories involved in the diagnosis and monitoring of age-related chronic diseases.     

Extraction and quantitation of furanic compounds dissolved in oils

There is often a need to calculate isotopic uranium activities from total uranium mass or gamma spectrometry measurement data. This calculation is based on a model of the relationship of the²³⁴U activity to that of²³⁵U since both are enriched together in the normal gaseous diffusion enrichment process. This paper presents equations for calculating these activities that have been developed from several sources of data. These equations have been used for several characterization studies and have produced very good results when compared to results from actual isotopic uranium analyses. However, because the variability in the model causes significant uncertainty in the calculated results, alpha-spectrometry is recommended for critical applications.