Lower Bounds on the Graver Complexity of <Emphasis Type="Italic">M</Emphasis>-Fold Matrices

In this paper, we present a construction that turns certain relations on Graver basis elements of an M-fold matrix \({{A^{(M)}}}\) into relations on Graver basis elements of an \({(M+1)}\)-fold matrix \({{A^{(M+1)}}}\). In doing so, we strengthen the bound on the Graver complexity of the M-fold matrix \({{A_{3\times{M}}}}\) from \({{g(A_{3\times{M}}) \geq 17\cdot2^{M-3}-7}}\) (Berstein and Onn) to \({{g(A_{3\times{M}}) \geq 24\cdot2^{M-3}-21}}\), for \({M \geq 4}\). Moreover, we give a lower bound on the Graver complexity \({{g(A^{(M)})}}\) of general \({M}\)-fold matrices \({{A^{(M)}}}\) and we prove that the bound for \({g(A_{3\times{M}})}\) is not tight.     

Development and validation of a fully automated online-SPE–ESI–LC–MS/MS multi-residue method for the determination of different classes of pesticides in drinking,ground and surface water

The present work describes a fully automated method based on online solid phase extraction–liquid chromatography–tandem mass spectrometry for the determination of different classes of pesticides, including acidic and polar pesticides and six thiamethoxam metabolites. Sample preconcentration was performed by extracting 4 mL of the sample with a single styrene-divinylbenzene polymer. Elution of the compounds was done within the high performance liquid chromatography gradient and tandem mass spectrometry determination was performed in the selected reaction monitoring mode, by recording 1–3 transitions per compound. The overall pretreatment and analysis time per sample was less than 15 min. Method validation was performed in drinking, ground and surface water. For nearly all compounds a recovery between 70% and 120% could be achieved. The limit of detection ranges from 1.2 to 18 ng/L in drinking water and 3.0 to 23 ng/L in ground and surface water. The correlation coefficients for a calibration range of 0.05–2 µg/L are between 0.9915 and 0.9999. The limit of quantification (LOQ) for all compounds lies below the required limit of 0.1 µg/L, to fulfil the Council Directive 98/83/EC. Most of the compounds easily reach an LOQ below 0.05 µg/L.     

ISO 15189-accredited laboratories fulfill the JCI Hospital Accreditation Standard requirements for the use of referral laboratories: report of a consensus meeting

Accreditation of healthcare services is recommended to ensure operation according to the highest quality standards. Various initiatives, such as legislation or accreditation by ISO or JCI, may be active to support and improve quality. The growing trend toward JCI hospital accreditation raised the concern of redundancy between JCI requirements for the use of referral laboratories and the ISO 15189 accreditation for medical laboratories. This would result in needless administrative efforts for hospital laboratories to collect and maintain required documentation, as the JCI quality requirements would be guaranteed given that the referral laboratory is ISO 15189 accredited for those examinations. A consensus meeting was organized by the Working Group for Hospital Accreditation of the Belgian Zorgnet-Icuro network, the University Hospitals of Leuven and the Red Cross to discuss the avoidance of any redundancy between both standards and to issue best practice guidelines for referral laboratories. It was concluded that JCI measurable elements for referral laboratories are covered by the ISO 15189 accreditation scope. The article substantiates the consensus that JCI and ISO quality requirements are harmonized and that accurate knowledge and interpretation of prevailing quality standards are essential to avoid redundancy in quality measures.     

Anions Stabilize Each Other inside Macrocyclic Hosts

Contrary to the simple expectations from Coulomb's law, Weinhold proposed that anions can stabilize each other as metastable dimers, yet experimental evidence for these species and their mutual stabilization is missing. We show that two bisulfate anions can form such dimers, which stabilize each other with self‐complementary hydrogen bonds, by encapsulation inside a pair of cyanostar macrocycles. The resulting 2:2 complex of the bisulfate homodimer persists across all states of matter, including in solution. The bisulfate dimer's OH???O hydrogen bonding is seen in a ¹H NMR peak at 13.75 ppm, which is consistent with borderline‐strong hydrogen bonds.     

On-Demand Activation of Transesterification by Chemical Amplification in Dynamic Thiol-Ene Photopolymers

Chemical amplification is a well-established concept in photoresist technology, wherein one photochemical event leads to a cascade of follow-up reactions that facilitate a controlled change in the solubility of a polymer. Herein, we transfer this concept to dynamic polymer networks to liberate both catalyst and functional groups required for bond exchange reactions under UV irradiation. For this, we exploit a photochemically generated acid to catalyse a deprotection reaction of an acid-labile tert-butoxycarbonyl group, which is employed to mask the hydroxy groups of a vinyl monomer. At the same time, the released acid serves as a catalyst for thermo-activated transesterifications between the deprotected hydroxy and ester moieties. Introduced in an orthogonally cured (450 nm) thiol-click photopolymer, this approach allows for a spatio-temporally controlled activation of bond exchange reactions, which is crucial in light of the creep resistance versus reflow ability trade-off of dynamic polymer networks.     

Biopolymer microparticle and nanoparticle formation within a microfluidic device

This paper reports a novel microfluidic method for the production of cross-linked alginate microparticles and nanoparticles. We describe a continuous process relying on both thermodynamic and hydrodynamic factors to form microdroplets. A rapid cross-linking reaction thereafter allows solidification of the polymer droplets either within the microfluidic device or "off-chip" to form alginate micro- and nanoparticles. Monodisperse droplets are generated by extruding an aqueous alginate solution using an axisymmetric flow-focusing design. As they flow downstream in the channel, due to water and the continuous phase being partially miscible, the water diffuses very slowly out of the polymeric droplets into the transport fluid, which causes the shrinkage of the drops and the condensation of the polymer phase. The resulting size of the solid particles depends on the polymer concentration and the ensuing balance between the kinetics of the cross-linking reaction and the volume loss due to solvent diffusion. This work details both a single-step microfluidic technique for the formation of alginate microparticles of sizes ranging from 1 to 50 microm via near-equilibrium solvent diffusion within a microfluidic device and thereafter a two-step method, which was shown to generate biopolymer nanoparticles of sizes ranging from 10 to 300 nm. These novel methodologies are extremely flexible and can be extended to the preparation of micro- and nanoparticles from a wide range of single or mixed synthetic and biologically derived polymers.     

Nanohydrodynamics: the intrinsic flow boundary condition on smooth surfaces

A dynamic surface force apparatus is used to determine the intrinsic flow boundary condition of two simple liquids, water and dodecane, on various smooth surfaces. We demonstrate the impact of experimental errors and data analysis on the accuracy of slip length determination. In all systems investigated, the dissipation is described by a well-defined boundary condition accounting for a whole range of separation, film thickness, and shear rate. A no-slip boundary condition is found in all wetting situations. On strongly hydrophobic surfaces, water undergoes finite slippage that increases with hydrophobicity. We also compare the relative influence of hydrophobicity and liquid viscosity on boundary flow by using water-glycerol mixtures with similar wetting properties.     

Phosvitin-calcium aggregation and organization at the air-water interface

Phosvitin, an egg yolk protein constituted by 50% of phosphorylated serines, presents good emulsifying properties whereas its interfacial properties are not yet clearly elucidated and remain object of discussion. Phosvitin has a high charge density and naturally forms aggregates through phosphocalcic bridges in egg yolk. This high charge density, doubled by this capacity to aggregate, limits the adsorption of the protein at the air-water interface. In this work, we investigated the aggregation impact by calcium ions on the organization of the phosvitin interfacial film using the atomic force microscopy. Phosvitin interfacial films without calcium ions are compared to phosvitin interfacial films formed in the presence of calcium ions in the subphase. We demonstrated that phosvitin is able to anchor at air-water interfaces in spite of its numerous negative charges. In the compression isotherm a transition was observed just before 28 mN/m signifying a possible modification of the interfacial film structure or organization. Calcium ions induce a reorganization towards a greater compaction of the phosvitin interfacial film even at low surface pressure. In conclusion we suggest that, in diluted regime, phosvitin molecules could adsorb by their two hydrophobic extremities exhibiting loops in the aqueous phase, whereas in concentred regime (high interfacial concentration) it would be adsorbed at the interface by only one extremity (brush model).     

Hexanuclear [Ni6L12] metallacrown framework consisting of NiS4 square-planar and NiS5 square-pyramidal building blocks

The hexanuclear [Ni(6)L(12)] (2) wheel-type cluster adopts an unusual structural motif whereby four NiS(4) square-planar and two NiS(5) square-pyramidal units are conjoined by edge sharing; the NiS(5) units resemble the Ni centre of the inactive state in the [NiFe] hydrogenase.