Multiarm star block and multiarm star mixed‐block copolymers via azide‐alkyne click reaction

The synthesis of multiarm star block (and mixed‐block) copolymers are efficiently prepared by using Cu(I) catalyzed azide‐alkyne click reaction and the arm‐first approach. α‐Silyl protected alkyne polystyrene (α‐silyl‐alkyne‐PS) was prepared by ATRP of styrene (St) and used as macroinitiator in a crosslinking reaction with divinyl benzene to successfully give multiarm star homopolymer with alkyne periphery. Linear azide end‐functionalized poly(ethylene glycol) (PEG‐N₃) and poly (tert‐butyl acrylate) (PtBA‐N₃) were simply clicked with the multiarm star polymer described earlier to form star block or mixed‐block copolymers in N,N‐dimethyl formamide at room temperature for 24 h. Obtained multiarm star block and mixed‐block copolymers were identified by using ¹H NMR, GPC, triple detection‐GPC, atomic force microscopy, and dynamic light scattering measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 99–108, 2010     

Numerical solution of momentum balance equations for plasmas with two ion species

In plasmas bounded by material surfaces the Bohm criterion has to be satisfied at the entrance of the Debye sheath near the surface. With a single ion species this constraint prescribes a boundary condition for the momentum balance equation governing the ion mass velocity. If, however, several ion species are present a generalization of the Bohm criterion does not provide enough number of boundary conditions. Additional “intermediate” conditions follow from the requirement that spatial derivatives of the ion velocities are finite everywhere within the plasma volume. The amount of such independent conditions is sufficient to determine, in an iterative way, also the position in the plasma where they have to be imposed. A numerical approach to find unique regular solutions of fluid motion equations, satisfying the generalized Bohm criterion at the plasma boundary, is elaborated and realized for the case of two ion species.     

Degradation of Poly(2-hydroxyethyl methacrylate) Obtained by Radiation in Aqueous Solution

The degradation of poly(hydroxyethyl methacrylate), PHEMA obtained by γ -radiation induced polymerization of HEMA in aqueous solution, was studied. The polymer was a gel type and insoluble in common organic solvents. The DSC thermogram of the polymer gave a Tg value at 88.2°C and an endothermic peak showed further polymerization or crosslinking at 110–160°C. The degradation observed in TGA was a depolymerization type. However, the FT-IR of TGA fragments showed no monomer, which was degraded further. The degradation of monomer was studied by the GC-MS method. Similar results were also observed.     

Cage-like amines in the synthesis and oxidation of camphor-10-sulfonic acid amides

Reactions of bicyclo[2.2.1]hept-5-en-exo- and -endo-2-ylmethanamines, exo-5,6-epoxybicyclo-[2.2.1]hept-exo-2-ylmethanamine, 1-(bicyclo[2.2.1]hept-2-yl)ethanamine, and 1-(1-adamantyl)ethanamine with camphor-10-sulfonyl chloride in chloroform in the presence of triethylamine gave the corresponding sulfonamides having two cage-like fragments. Stereoisomeric N-(bicyclo[2.2.1]hept-5-en-2-ylmethyl)camphor-10-sulfonamides were oxidized with peroxyphthalic acid generated in situ from phthalic anhydride and 50% hydrogen peroxide. The exo stereoisomer was thus converted into the corresponding 5,6-epoxy derivative, while the endo isomer gave rise to 4-(7,7-dimethyl-2-oxobicyclo[2.2.1]hept-1-ylmethyl)-4-azatricyclo[4.2.1.0^3,7]-nonan-exo-2-ol (substituted azabrendane). The structure of the synthesized camphor-10-sulfonamides was confirmed by IR and ¹H and ¹³C NMR spectra with the use of homo- (COSY) and heteronuclear ¹H-¹³C correlation techniques (HMQC, HMBC). Heterocyclization of sulfonamides of the norbornene series was also simulated by quantum-chemical calculations at the PM3 and BHandHLYP/6-31G(d) levels of theory.     

On the Reactions of Furan‐2,3‐diones with Oxindole (=1,3‐Dihydro‐2H‐indol‐2‐one) and Lawesson Reagent. Synthesis of New 1,3‐Dihydro‐2H‐indol‐2‐ones,Bis‐furanones,and Bis‐pyrrolones

Lactone analogues of 3‐substituted oxindoles (=1,3‐dihydro‐2H‐indol‐2‐ones) and nonbenzoid oxa‐analogous isoindigoid or nonbenzoid isoindigoid dyes were prepared by the reactions of furan‐2,3‐diones with oxindole and Lawesson reagent (Schemes 1 and 3), respectively. So, new derivatives of 2‐oxobutanoic acid, bis‐furanone, and bis‐pyrrolone, which are potentially biologically active compounds, were synthesized for the first time.     

Highly sensitive determination and validation of gabapentin in pharmaceutical preparations by HPLC with 4-fluoro-7-nitrobenzofurazan derivatization and fluorescence detection

A sensitive HPLC method with pre-column fluorescence derivatization using 4-Fluoro-7-Nitrobenzofurazan (NBD-F) has been developed for the determination of gabapentin in pharmaceutical preparations. The method is based on the derivatization of gabapentin with (NBD-F) in borate buffer of pH 9.5 to yield a yellow, fluorescent product. The HPLC separation was achieved on a Inertsil C(18) column (250 mm × 4.6 mm) using a mobile phase of methanol water (80:20, v/v) solvent system at 1.2 mL/min flow rate. Mexiletine was used as the internal standard. The fluorometric detector was operated at 458 nm (excitation) and 521 nm (emission). The assay was linear over the concentration range of 5 50 ng/mL. The method was validated for specificity, linearity, limit of detection, limit of quantification, precision, accuracy, robustness. Moreover, the method was found to be sensitive with a low limit of detection (0.85 ng/mL) and limit of quantitation (2.55 ng/mL). The results of the developed procedure for gabapentin content in capsules were compared with those by the official method (USP 32). Statistical analysis by t- and F-tests, showed no significant difference at 95 confidence level between the two proposed methods.     

Liftable homeomorphisms of rank two finite abelian branched covers

Archiv der Mathematik - We investigate branched regular finite abelian A-covers of the 2-sphere, where every homeomorphism of the base (preserving the branch locus) lifts to a homeomorphism of the...     

Enhancement of the Activity and Enantioselectivity of Lipase by Sol–Gel Encapsulation Immobilization onto β-cyclodextrin-Based Polymer

Candida rugosa lipase was encapsulated within a chemically inert sol–gel support prepared by polycondensation with tetraethoxysilane and octyltriethoxysilane in the presence of β-cyclodextrin-based polymer. The catalytic activity of the encapsulated lipases was evaluated both in the hydrolysis of p-nitrophenylpalmitate and the enantioselective hydrolysis of racemic Naproxen methyl ester. It has been observed that the percent activity yield of the encapsulated lipase was 65 U/g, which is 7.5 times higher than that of the covalently immobilized lipase. The β-cyclodextrin-based encapsulated lipases had higher conversion and enantioselectivity compared with covalently immobilized lipase. The study confirms an excellent enantioselectivity (E >300) for the encapsulated lipase with an enantiomeric excess value of 98% for S-naproxen.     

Sorption of Cu(II) onto silica gel immobilized calix[4]arene derivative with tripodal structure

This study contains the synthesis of silica gel-immobilized calix[4]arene derivative (TR-CL[4]P) as a new sorbent and its sorption studies towards Cu (II) ion in aqueous solution. The aldehyde pointed calix[4]arene derivative 5 was synthesized and then it was immobilized onto 3-aminopropilsilica gel (APS). In batch sorption experiments, the experimental results showed that TR-CL[4]P is effective sorbent towards Cu (II) ion. Therefore, the effect of solution pH, sorption time, temperature and initial metal ion concentration onto Cu (II) sorption was investigated. Maximum Cu(II) removal was obtained at 30?°C, 30?min and pH 6.0 for TR-CL[4]P and the batch sorption capacity was found as 17.8?mg/g. The characteristics of the sorption process for Cu (II) ion were evaluated by using the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) adsorption isotherms. Also, thermodynamic parameters, i.e., ΔG, ΔS, and ΔH were calculated for the system.     

Numerical modeling of transport barrier formation

In diverse media the characteristics of mass and heat transfer may undergo spontaneous and abrupt changes in time and space. This can lead to the formation of regions with strongly reduced transport, so called transport barriers (TB). The presence of interfaces between regions with qualitatively and quantitatively different transport characteristics impose severe requirements to methods and numerical schemes used by solving of transport equations. In particular the assumptions made in standard methods about the solution behavior by representing its derivatives fail in points where the transport changes abruptly. The situation is complicated further by the fact that neither the formation time nor the positions of interfaces are known a priori. A numerical approach, operating reliably under such conditions, is proposed. It is based on the introduction of a new dependent variable related to the variation after one time step of the original one integrated over the volume. In the vicinity of any grid knot the resulting differential equation is approximated by a second order ordinary differential equation with constant coefficients. Exact analytical solutions of these equations are conjugated between knots by demanding the continuity of the total solution and its first derivative. As an example the heat transfer in media with heat conductivity decreasing abruptly when the temperature e-folding length exceeds a critical value is considered. The formation of TB both at a heating power above the critical level and caused with radiation energy losses non-linearly dependent on the temperature is modeled.