Calorimetric study and thermal analysis of Al–Sn system

The results of calorimetric study and thermal analysis of binary Al–Sn system are presented in this paper. The Oelsen calorimetry was used in thermodynamic analysis. Following thermodynamic properties were determined at 727 °C: activities, activity coefficients, partial/integral molar Gibbs excess, and mixing energies. The energetics of mixing in liquid Al–Sn alloys has been analyzed through the study of concentration fluctuation in the long-wavelength limit. Thermal analysis of selected alloys in Al–Sn system was done using differential thermal analysis. Defined characteristic phase transition temperatures were used for comparison with calculated phase diagram of investigated system. Good agreement with available literature data was obtained. Structural analysis of selected alloys was done using optic microscopy.     

Parallel Interactions at Large Horizontal Displacement in Pyridine–Pyridine and Benzene–Pyridine Dimers

A study of crystal structures from the Cambridge Structural Database (CSD) and DFT calculations reveals that parallel pyridine–pyridine and benzene–pyridine interactions at large horizontal displacements (offsets) can be important, similar to parallel benzene–benzene interactions. In the crystal structures from the CSD preferred parallel pyridine–pyridine interactions were observed at a large horizontal displacement (4.0–6.0 Å) and not at an offset of 1.5 Å with the lowest calculated energy. The calculated interaction energies for pyridine–pyridine and benzene–pyridine dimers at a large offset (4.5 Å) are about 2.2 and 2.1 kcal mol^?1, respectively. Substantial attraction at large offset values is a consequence of the balance between repulsion and dispersion. That is, dispersion at large offsets is reduced, however, repulsion is also reduced at large offsets, resulting in attractive interactions.     

Quantitative Analysis of Coal by Laser-Induced Breakdown Spectroscopy Using TEA CO2 Laser as the Excitation Source

Plasma Chemistry and Plasma Processing - This work presents a study of the applicability of laser-induced breakdown spectroscopy based on infrared transversally excited atmospheric CO2 pulsed laser...     

Preparation and Antimicrobial Activity of Chitosan and Its Derivatives: A Concise Review

Despite the advantages presented by synthetic polymers such as strength and durability, the lack of biodegradability associated with the persistence in the environment for a long time turned the attention of researchers to natural polymers. Being biodegradable, biopolymers proved to be extremely beneficial to the environment. At present, they represent an important class of materials with applications in all economic sectors, but also in medicine. They find applications as absorbers, cosmetics, controlled drug delivery, tissue engineering, etc. Chitosan is one of the natural polymers which raised a strong interest for researchers due to some exceptional properties such as biodegradability, biocompatibility, nontoxicity, non-antigenicity, low-cost and numerous pharmacological properties as antimicrobial, antitumor, antioxidant, antidiabetic, immunoenhancing. In addition to this, the free amino and hydroxyl groups make it susceptible to a series of structural modulations, obtaining some derivatives with different biomedical applications. This review approaches the physico-chemical and pharmacological properties of chitosan and its derivatives, focusing on the antimicrobial potential including mechanism of action, factors that influence the antimicrobial activity and the activity against resistant strains, topics of great interest in the context of the concern raised by the available therapeutic options for infections, especially with resistant strains.     

Application of Novel Zn‐Ferrite Modified Glassy Carbon Paste Electrode as a Sensor for Determination of Cd(II) in Waste Water

This paper describes the preparation of a new sensor based on Zn‐ferrite modified glassy carbon paste electrode and its electrochemical application for the determination of trace Cd(II) ions in waste waters using differential pulse anodic stripping voltammetry (DPASV). Different Zn/Ni ferrite nanoparticles were synthesized and characterized using scanning electron microscopy (SEM) and X‐ray powder diffraction (XRPD). The prepared ferrite nanoparticles were used for the preparation of Zn‐ferrite‐modified glassy carbon paste electrode (ZnMGCPE) for determination of Cd(II) at nanomolar levels in waste water at pH 5. The different parameters such as conditions of preparation, Zn²⁺/Ni²⁺/Fe²⁺ ratio and electrochemical parameters, percentage of modifier, accumulation time, pH and accumulation potential were investigated. Besides, interference measurements were also evaluated under optimized parameters. The best voltammetric response was observed for ZnFe₂O₄ modifier, when the percentage of modifier was 3 %, accumulation time 9 min, pH of supporting electrolyte 5 and accumulation potential ?1.05 V. Thus prepared electrode displays excellent response to Cd(II) with a detection limit of 0.38 ppb, and selective detection toward Cd(II) was achieved.     

High diffusion barrier and piezoelectric nanocomposites based on polyvinylidene fluoride‐trifluoroethylene copolymer and hydrophobized clay

Nanocomposites based on polyvinylidene fluoride–trifluoroethylene copolymer and up to 4 vol % of hydrophobized clay nanoparticles are investigated. The structure, piezoelectric properties, and oxygen permeability of solvent cast films are analyzed before and after annealing above the Curie temperature of the polymer. Exfoliation of the clay takes place at concentrations up to 1 vol %, beyond which it rapidly drops and is absent at a concentration of 4 vol %. The presence of clay does not change the crystallinity of the polymer, but leads to a threefold decrease of the oxygen permeability at a concentration of 0.5 vol %. Annealing at 130 °C increases the crystallinity, the proportion of β phase up to 94%, and the piezoelectric coefficient by 20–40% at clay fractions below 1 vol %. Annealing also leads to a remarkable 3‐ to 10‐fold decrease of O₂ permeability and to intriguing changes of the activation energy for O₂ transport, which decreases from 56 kJ/mol for the as‐cast polymer to below 10 kJ/mol for the polymer and exfoliated composite. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1828–1836     

Factors that influence the tribo-charging of insulating ducts in suction-type dilute-phase pneumatic transport systems

The aim of this study is to refine the understanding of the tribo-electrostatic phenomena that can affect the efficiency of suction-type dilute-phase transport systems. The study was conducted with mm-size ABS-PC particles, a granular material originating from genuine information technology wastes. The tribo-charging process was modelled using the response surface method of experimental design. The controlled variables were the granular material feed rate and the aspirating air speed rate. The monitored variable was the charge imparted to a well-defined section of the duct and which is equal to the charge transferred to the particles passing through that section of the pneumatic transport system. An induction type sensor connected to an electrometer has been employed for the measurements. The data were processed by a virtual instrument developed in LabView. A commercial software package was employed for estimating the effects of the various factors and predicting the optimum operating conditions, which were then confirmed by a final experiment.     

Hamiltonian circuits in Cayley graphs

The following result is proved: If either G is a finite abelian group or a semidirect product of a cyclic group of prime order by a finite abelian group of odd order, then every connected Cayley graph of G is hamiltonian.     

Hole interactions with molecular vibrations on DNA

We report on a study of the interactions between holes and molecular vibrations on dry DNA using photoinduced infrared absorption spectroscopy. Laser photoexcited holes are found to have a room-temperature lifetime in excess of tau > 1 ms, clearly indicating the presence of localization. However, from a quantitative model analysis of the frequency shifts of vibrational modes caused by the holes, we find the hole-vibrational coupling constant to be relatively small, lambda approximately 0.2. This interaction leads to a change in the conformational energy of DeltaE0 approximately 0.015 eV, which is too small to cause self-trapping at room temperature. We conclude that, at least in the dry (A) form, DNA is best understood in terms of a double chain of coupled quantum dots arising from the pseudorandom chain sequence of base pairs, in which Anderson localization prevents the formation of a metallic state.     

Phosphorus as sintering activator in powder metallurgical steels: characterization of the distribution and its technological impact

Powder metallurgy is a highly developed method of manufacturing reliable ferrous parts. The main processing steps in a powder metallurgical line are pressing and sintering. Sintering can be strongly enhanced by the formation of a liquid phase during the sintering process when using phosphorus as sintering activator. In this work the distribution (effect) of phosphorus was investigated by means of secondary ion mass spectrometry (SIMS) supported by Auger electron spectroscopy (AES) and electron probe micro analysis (EPMA). To verify the influence of the process conditions (phosphorus content, sintering atmosphere, time) on the mechanical properties, additional measurements of the microstructure (pore shape) and of impact energy were performed. Analysis of fracture surfaces was performed by means of scanning electron microscopy (SEM). The concentration of phosphorus differs in the samples from 0 to 1% (w/w). Samples with higher phosphorus concentrations (1% (w/w) and above) are also measurable by EPMA, whereas the distributions of P at technically relevant concentrations and the distribution of possible impurities are only detectable (visible) by means of SIMS. The influence of the sintering time on the phosphorus distribution will be demonstrated. In addition the grain boundary segregation of P was measured by AES at the surface of in-situ broken samples. It will be shown that the distribution of phosphorus depends also on the concentration of carbon in the samples.