Solution-based chemical synthesis of boehmite nanofibers and alumina nanorods

This article reports an easy chemical method of synthesizing boehmite nanofibers by a modified sol-gel process involving aluminum isopropoxide precursor. Nanorods of gamma-alumina have been successfully prepared after dehydration of the viscous sol at 600 degrees C for 4 h in air. The boehmite nanofibers and gamma-alumina nanorods were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy for surface chemistry and functional groups, scanning electron microscopy, high-resolution transmission electron microscopy with selected area electron diffraction, and energy-dispersed spectroscopy for morphology and structure identification. The length of the boehmite nanofibers was found to be more than 10 mum with a crystalline lattice structure. The mechanism of formation of the boehmite nanofibers included the preferential growth along the longitudinal axis due to interaction between the solvent molecules and the surface OH- groups of hydrogen bonds. It is also suggested that the boehmite nanofibers may have formed due to the inherent instability of the planar structure of the boehmite lattice. The diameter of the gamma-alumina nanorods was found to be less than 10 nm with a varying length in the range of 50-200 nm. Boehmite to gamma-Al2O3 transformation was attributed to the loss of water molecules by internal condensation of protons and hydroxyl ions.     

XRD and bulk magnetic studies on Ni-Cd and Ti doped Ni-Cd ferrites

For the ferrites Ni _x Cd_1–x Fe₂O₄ (x=0.3, 0.4,1) the lattice parameter, grain size, electrical resistivity, initial permeability, Curie temperature and squareness of the magnetization curve were measured. The results are discussed in terms of the model of the canted spin structure taking into account the domain structure of the polycrystalline ferrite.     

Synergetic extraction and spectrophotometric determination of iron (II) in steel

Summary A simple and rapid method is described for synergetic extraction and spectrophotometric determination of iron(II). The Fe(II)--furildioxime-pyridine complex extracted into chloroform has a characteristic pink color measurable at 570 nm. Iron is also separated from associated elements and the results of the analysis of synthetic mixtures and standard steel samples are reported.

---

Zusammenfassung Eine einfache und rasche Methode zur Extraktion und Bestimmung von Eisen(II) wurde beschrieben. Der Komplex Fe(II)--Furildioxim-Pyridin wird mit Chloroform extrahiert. Seine charakteristische rosa Farbe ist bei 570 nm meßbar. Eisen läßt sich so auch von Begleitelementen trennen. Die Analysenergebnisse für synthetische Gemische und Standard-Stahlproben werden mitgeteilt.

     

Monoterpenoids—V: (+)-Carvone from (+)-car-3-ene

A stereoselective conversion of the readily available (+)-car-3-ene into (+)-carvone by two different routes is described. This is the first report on synthesis of carvone from car-3-ene.     

Combining synchronous fluorescence spectroscopy with multivariate methods for the analysis of petrol-kerosene mixtures

Synchronous fluorescence spectroscopy (SFS) is a rapid, sensitive and nondestructive method suitable for the analysis of multifluorophoric mixtures. The present study demonstrates the use of SFS and multivariate methods for the analysis of petroleum products which is a complex mixture of multiple fluorophores. Two multivariate techniques principal component regression (PCR) and partial least square regression (PLSR) have been successfully applied for the classification of petrol-kerosene mixtures. Calibration models were constructed using 35 samples and their validation was carried out with varying composition of petrol and kerosene in the calibration range. The results showed that the method could be used for the estimation of kerosene in kerosene-mixed petrol. The model was found to be sensitive, detecting even 1% contamination of kerosene in petrol.     

Stability-Indicating HPLC Method for the Determination of Metadoxine as Bulk Drug and in Pharmaceutical Dosage Form

A sensitive and reproducible method is described for the quantitative determination of metadoxine in the presence of its degradation products. The method was based on high performance liquid chromatographic separation of the drug from its degradation products on the reversed phase, kromasil column [C₁₈ (5-micron, 25 cm × 4.6 mm, i.d.)] at ambient temperature using a mobile phase consisting of methanol and water (50: 50, v/v). Flow rate was 1.0 mL min^?1 with an average operating pressure of 180 kg cm^?2 and t _R was found to be 2.85 ± 0.05 min. Quantitation was achieved with UV detection at 286 nm based on peak area with linear calibration curves at concentration range 10–100 μg mL^?1. This method has been successively applied to pharmaceutical formulation. No chromatographic interference from the tablet excipients was found. The method was validated in terms of precision, robustness, recovery and limits of detection and quantitation. Drug was subjected to acid, alkali and neutral hydrolysis, oxidation, dry heat, wet heat treatment and photo and UV degradation. As the proposed method could effectively separate the drug from its degradation products, it can be employed as stability indicating one. Moreover, the proposed HPLC method was utilized to investigate the kinetics of the acidic, alkaline and oxidative degradation processes at different temperatures and their respective apparent pseudo first order rare constant, half-life and activation energy was calculated with the help of Arrhenius plot. In addition the pH-rate profile of degradation of metadoxine in constant ionic strength buffer solutions with in the pH range 2–11 was studied.     

Effects of structural imperfections on the dynamic mechanical response of main-chain smectic elastomers

We examine the influence of structural imperfections on mechanical damping in polydomain smectic main-chain liquid crystalline elastomers (MCLCE) subjected to small strain oscillatory shear. The mechanical loss factor tan δ = G″(ω)/G′(ω) exhibits a strong maximum (tan δ ≈ 1.0) near the smectic-isotropic (clearing) transition. “Optimal” elastomers that exhibit minimal equilibrium swelling in a good solvent are compared with highly swelling “imperfect elastomers” that contain higher concentrations of structural imperfections such as pendant chains. For the imperfect elastomers, tan δ is markedly enhanced in the isotropic state because of relaxation of pendant chains and other imperfections. However, within the smectic state, the magnitude of tan δ and its temperature dependence are similar for optimal and imperfect elastomers at ω = 1 Hz. The prominent loss peak near the clearing transition arises from segment-level relaxations that are insensitive to the details of chain connectivity. Smectic MCLCE can be tailored for applications as vibration-damping materials by manipulating the clearing transition temperature through the backbone structure or by deliberate introduction of structural imperfections such as pendant chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3267–3276, 2007     

Preparation of cobalt doped γ-Fe2O3 and Mn-Zn ferrites by the thermal decomposition of the hydrazine precursors

Fine particle cobalt doped-Fe₂O₃ and Mn-Zn ferrites have been prepared by the thermal decomposition of N₂H₅Co _x Fe_1–x (N₂H₃COO)₃.H₂O wherex=1–10 atom% and (N₂H₅)₃Mn_xZn_1–x Fe₂(N₂H₃COO)₉· 3H₂O wherex=0.2–0.8, respectively. Formation of these oxide materials has been confirmed by thermogravimetry and X-ray powder diffraction patterns. The fine particle nature of these oxide materials is evident from particle size analysis and surface area measurements.

---

Zusammenfassung Mit fein verteiltem Kobalt versetztes-Fe₂O₃ sowie Mn-Zn Ferrite wurden durch thermische Zersetzung von N₂H₅Co _x Fe_1–x (N₂H₃COO)₃·H₂O mit jc=1–10 Atomprozent bzw. (N₂H₅)₃Mn _x Zn_1–x Fe₂(N₂H₃COO)₉·3H₂O mitx=0,2–0,8 hergestellt. Die Bildung dieser Oxidstoffe wurde durch Thermogravimetrie und Pulverdiffraktionsmethoden bekräftigt. Die Feinkornstruktur dieser Oxidstoffe wird durch Korngrößenverteilungs- und Oberflächenmessungen augenscheinlich.

---

N₂H₅Co _x Fe_1–x (N₂H₃COO)₃·H₂O, x-1–10 %, (N₂H₅)₃Mn _x Zn_1–x Fe₂(N₂H₃COO)₉ · 3H₂O, x=0,2–0,8, , , -Fe₂O₃ Mn-Zn . . .

     

Tracer-diffusion of Zn2+ ions in cobalt sulphate

Tracer-diffusion of Zn²⁺ ions in the presence of CoSO₄ is studied at 25°C in 1% agar gel over a concentration range of 10^–5 to 0.25M using a zone-diffusion technique. The deviations observed between experimental and theoretical values of diffusion coefficients are explained by considering different types of interactions occurring in the ion-gel-water system. Further, study of the obstruction, effect in the diffusion of Zn²⁺ ions at different concentrations of CoSO₄ reveals that the -value decreases with increasing concentration of the electrolyte. This observation is accounted on the basis of competitive hydration between ions and agar molecules.