Oxidative addition of some geminal halonitroalkanes to iridium(I) and platinum(0) compounds

Oxidative addition of 1-chloro-1-nitroethane to trans-IrCl(CO)-[P(CH₃)₂C₆H₅]₂ followed by treatment of the initial product with pyridine yields a new iridium(III) complex IrCl(py)[COC(NO₂)CH₃][P(CH₃)₂C₆H₅]₂, whose structure has been confirmed by X-rays crystallography. Two intermediate products have been observed by NMR spectroscopy; their structures have been tentatively assigned. The reaction of the corresponding bromine derivatives yields two isomers of the composition IrBr₂(CO)[CH(NO₂)CH₃][P(CH₃)₂C₆H₅]₂, and these are not affected by pyridine. The reaction of 1-chloro-1-nitroethane with Pt[P(C₆H₅)₃]₄ takes a completely different course in that yields nitrorethane and cis-PtCl₂[P(C₆H₅)₃]₂ as the main products, with no detectable formation of the products of oxidation addition. A brief mechanistic investigation points towards the participation of radicals and radical anions as transient intermediates and a mechanism is proposed which explains most of the experimental results.     

Implementation of an expert system for the qualitative interpretation of X-ray fluorescence spectra

The implementation of an expert system for the automated qualitative interpretation of energy-dispersive x-ray spectra is discussed. The first step in the interpretation process is the extraction of the relevant data from the spectrum, which is done by a preprocessor program, written in FORTRAN. The expert system itself consists of three parts. The knowledge base contains specific information on energy-dispersive x-ray fluorescence spectrometry presented in the form of IF/THEN rules. The data base contains the reduced spectral data and an array of certainty factors associated with each element; the certainty factor for an element represents the probability of its being present in the sample from which the spectrum was taken. Finally, the inference engine performs manipulation of the knowledge. For a particular state of the data base, the certainty factors for all the elements are iteratively modified until convergence is reached by using the rules from the knowledge base. During each cycle, the inference engine selects one rule from the knowledge base and executes it. Rules are selected on the basis of the chemical elements contained in their IF part and according to their previously assigned focus levels. Execution of the THEN part of the selected rule modifies the certainty factors of a number of elements. At the end of the interpretation session, the system lists the elements which have a high probability of being present in the sample. Optionally, the user can be provided with explanations of the reasoning steps taken during the interpretation. Application of the expert system to a particular spectrum shows that it is useful for the reliable interpretation of spectral data obtained from electron microprobe analysis of industrial aerosol particles.     

Orthogonality and similarity within silica-based reversed-phased chromatographic systems

The starting point of this study was a current set of 32 chromatographic systems used to select initial conditions for method development to determine the impurity profile of a drug. The system exhibiting the best selectivity is then selected for further method development. In this current set eight silica-based phases are applied in conjunction with four mobile phases at different pH. In order to save time and resources, the possibilities for a meaningful subset selection were investigated. The most differing systems in terms of selectivity, in other words only the most orthogonal systems, need to be selected. Since the stationary phases are all silica-based, the selectivity differences are examined within a more homogeneous group than if, for instance, also zirconia- or polymer-based columns would be involved. To select the subset of systems also the best overall separation performances are taken into account. The selection is based both on the HPLC-DAD data of a generic set of 68 drugs, and on the LC-MS-DAD results for a mixture of 15 drugs, less different in structure. The orthogonality is evaluated using weighted-average-linkage dendrograms and color maps, both created from the Pearson-correlation coefficients r between normalized retention times r. The Derringer's desirability functions are applied to define the systems with the best overall separation performances. Proposals for different representative subsets of the initial 32 systems are made.     

Dérivés propargyliques,XII et dérivés de la décahydroquinoléine,II Alkynyl-4, alkényl-4 et alkyl-4-décahydroquinolinols-4 N-substitués

The authors describe the synthesis of decahydro-4-quinolinones and N-substituted 4-alkynyl-, 4-allyl- and 4-alkyldecahydro-4-quinolinols and discuss the stereochemical problems of this compounds.     

The adsorption of endothelin 1 to phospholipids is governed by electrostatic interactions: A monolayer and fluorescence study

In order to elucidate the influence on the lipidic environment on the recognition process of its membrane associated receptor, the interactions of the vasoconstrictor peptide endothelin 1 with various phospholipids have been investigated using different lipidic model membranes: monolayers at constant surface pressure, vesicles and micelles. A monolayer study of ET1 adsorbed onto the water surface has shown that the C-terminus of the peptide points towards the aqueous phase. Penetration measurements into lipidic monolayers indicate that ET1 adsorbs to phospholipids with an orientation similar to that of the air–water interface and fluorescence measurements are in agreement with such an orientation of the peptide. This adsorption is selective for neutral phospholipids and indicates that the nature of the phospholipid headgroups is of major importance for the approach of the membrane associated receptor.     

Experimental analysis and modified rotor description of the infrared fundamental band of HCl in Ar, Kr, and Xe solutions

We report an experimental study of the rotovibrational fundamental PQR-band shapes in the IR absorption spectra of HCl dissolved in condensed rare gases in a wide range of temperatures. The effective vibrational frequencies are determined from analysis of the fine rotational structure partially resolved in the band wings. The central Q-branch components appear redshifted with respect to the effective vibrational frequencies, their shifts in different solvents found to match the HCl stretching mode shifts in binary Rg...HCl van der Waals heterodimers. Theoretical quasi-free rotor and modified rotor models are applied to describe evolution of the band profiles at changing thermodynamic conditions. Both models are shown to reproduce equally well the observed spectral density distributions in the band wings. However, the modified rotor formalism that accounts for depopulation of the lower-energy rotational solute states provides better agreement with the experiment in the range of the P- and R-branch maxima. We surmise that the Q branches separated from the measured spectral profiles are formed by transitions between rotationally hindered states of diatomic molecules coupled to the solvent by the local anisotropy of the interaction potential.     

Equilenin-2'-deoxynucleoside adducts: analysis with nano-liquid chromatography coupled to nano-electrospray tandem mass spectrometry

The interaction of 4-hydroxy metabolites of estrogens with DNA leads to the formation of DNA adducts. These adducts are believed to play an important role in the incidence of breast and endometrial cancer. In order to be able to analyze these adducts in in vivo samples a method based upon the coupling of miniaturized liquid chromatography (LC) to electrospray tandem mass spectrometry (ES-MS/MS) was developed for the analysis of the adducts formed with 4-hydroxyequilenin. In vitro synthesized adducts obtained by the reaction of 4-hydroxyequilenin with the main 2'-deoxynucleosides were separated on a Hypersyl C(18) BDS nano-HPLC column (15 cm x 75 microm i.d.) at a flow-rate of 300 nl min(-1) using gradient elution with CH(3)OH--0.2% CH(3)COOH in H(2)O. The column was coupled, in combination with a column switching system, to a nano-electrospray interface. Analysis of the low- and high-resolution low-energy collision-activated dissociation product ion spectra of normal and deuterated adducts supported earlier data demonstrating equilenin to form different isomeric adducts, except with thymidine, for which no adducts were found. The nano-HPLC column-switching ES-MS system was tested for its sensitivity on a triple-quadrupole instrument, and detection limits down to 197 fg in the single reaction monitoring mode were obtained for semi-preparatively isolated equilenin--2'-deoxyguanosine adduct.     

Effect of pressure on free-radical copolymerization kinetics. I. A concept of additivity of partial molar volumes of activation

A short review of the effect of pressure on copolymerization kinetics shows the necessity of simple models for a better understanding of activation volumes. Therefore, a simple concept, possibly generally valid for free-radical polymerization, is proposed, based on the assumption that molar volumes of activation can be expressed as an addition of a characteristic radical and a monomer contribution, regardless of the combination involved. The scheme may facilitate the visualization of the transition state and contribute to the understanding of reaction mechanisms of radical polymerizations. Ethylene–vinyl acetate copolymerization at 62°C with tert-butyl alcohol as solvent agrees with the proposed scheme, appearing from the pressure independence of the product of reactivity ratios at the different levels (35,600, and 1200 kg/cm²). Implicitly it can be shown that an ethylene monomer contributes about 2 cm³/mole more to the activation volumes of the propagation reactions than does the vinyl acetate monomer, whereas for the radicals the difference of the respective contributions to the activation volumes is opposite in sign.     

Selenium in environmental waters: Determination, speciation and concentration levels

This article reviews the different methods used for the determination of selenium species in all types of environmental waters. Basic difficulties are discussed and the efficiency of the methods is explained in view of the sub-mug/1. concentration levels. Special attention is paid to preconcentration steps. Published data on speciation and concentration levels in various water samples are critically reviewed.     

Conversion of diaryliodonium salts to aryl fluorides

The preparation of aryl fluorides by the reaction of diaryliodonium salts with KF is discussed. Generally, best results were obtained when the salt Ar₂I⁺X^? was heated with KF in the absence of solvent. The counterion, X^?, must be non-nucleophilic.