Luminescent organoboron quinolate polymers

The synthesis of well-defined luminescent organoboron polymers via a novel three-step procedure starting from silylated polystyrene is reported. Highly selective borylation of poly(4-trimethylsilylstyrene) (PS-Si), followed by replacement of the bromine substituents in poly(4-dibromoborylstyrene) (PS-BBr) with substituted thienyl groups (R = H, 3-hexyl, 5-hexyl), and final introduction of the 8-hydroxyquinolato moiety yields a series of new organoboron quinolate polymers in 67-83% isolated yield. The hexyl-substituted polymers are highly soluble and solution-processable yielding thin films that efficiently emit light at 513-514 nm upon excitation at 395 nm.     

Infrared spectra of M+NO 3 − contact ion pairs in aprotic solvents and matrix isolated in the corresponding glasses

Studies of the vibrational spectra of matrix-isolated M⁺NO ₃ ^– ion pairs have been extended to glassy aprotic solvents. The deuterated form of the solvents DMSO, THF, and ACN have windows through the 7- nitrate ionv ₃(e) mode infrared region, so it was possible to clearly observe the splitting of the degeneracy of this mode,v ₃, produced by the contacting, but solvated, alkali metal cation. Primary attention has been directed to the extent to which this splitting is reduced relative to the argon matrix values. This reduction, which reflects electron-density transfer from the solvating molecules to the ion pairs, is comparable to that observed for H₂O and NH₃ matrices as the splitting is reduced to 20–35% of the argon-matrix values. The extent of reduction ofv ₃ for the different solvents has been related to Gutmann's donicity number scale with the correlation holding well for solvent molecules of comparable size, DMSO, THF and DMF, but breaking down for the smaller linear ACN, apparently because of more molecules in the cation solvation sphere. The matrix data have also been used, through comparison with spectra for saturated liquid solutions of Li⁺NO ₃ ^– , to show that the contact ion pair is the dominant species in liquid THF and ACN, whereas the ions are largely solvent separated in DMSO.     

Molecular dynamics averaging of Xe chemical shifts in liquids

The Xe nuclear magnetic resonance chemical shift differences that afford the discrimination between various biological environments are of current interest for biosensor applications and medical diagnostic purposes. In many such environments the Xe signal appears close to that in water. We calculate average Xe chemical shifts (relative to the free Xe atom) in solution in eleven liquids: water, isobutane, perfluoro-isobutane, n-butane, n-pentane, neopentane, perfluoroneopentane, n-hexane, n-octane, n-perfluorooctane, and perfluorooctyl bromide. The latter is a liquid used for intravenous Xe delivery. We calculate quantum mechanically the Xe shielding response in Xe-molecule van der Waals complexes, from which calculations we develop Xe (atomic site) interpolating functions that reproduce the ab initio Xe shielding response in the complex. By assuming additivity, these Xe-site shielding functions can be used to calculate the shielding for any configuration of such molecules around Xe. The averaging over configurations is done via molecular dynamics (MD). The simulations were carried out using a MD technique that one of us had developed previously for the simulation of Henry's constants of gases dissolved in liquids. It is based on separating a gaseous compartment in the MD system from the solvent using a semipermeable membrane that is permeable only to the gas molecules. We reproduce the experimental trends in the Xe chemical shifts in n-alkanes with increasing number of carbons and the large chemical shift difference between Xe in water and in perfluorooctyl bromide. We also reproduce the trend for a given solvent of decreasing Xe chemical shift with increasing temperature. We predict chemical shift differences between Xe in alkanes vs their perfluoro counterparts.     

Duplex-promoted platination of adenine-N3 in the minor groove of DNA: challenging a longstanding bioinorganic paradigm

The interactions of [Pt(en)Cl(ACRAMTU-S)](NO3)2 (PT-ACRAMTU, en = ethane-1,2-diamine, ACRAMTU = 1-[2-(acridin-9-ylamino)ethyl]-1,3-dimethylthiourea) with adenine in DNA have been studied using a combination of analytical and high-resolution structural methods. For the first time, a cytotoxic platinum(II) complex has been demonstrated to form adducts in the minor groove of DNA through platination of the adenine-N3 endocyclic nitrogen. An acidic depurination assay was developed that allowed the controlled and selective (pH 2, 60 degrees C, 12 h) release of platinum-modified adenine from drug-treated nucleic acid samples. From the digested mixtures, three adducts were isolated by semipreparative reverse phase high-performance liquid chromatography and studied by electrospray ionization mass spectrometry (in-line LC-MS), variable-pH 1H NMR spectroscopy, and, where applicable, X-ray crystallography. The three species were identified as the N7 (A-I), N3 (A-II), and N1 (A-III) linkage isomers of [Pt(en)(ACRAMTU-S)(adenine)]3+ (A). Incubations carried out with the single- and double-stranded model sequences, d(TA)5 and d(TA)15, as well as native DNA indicate that the adduct profiles (A-I:A-II:A-IIIratios) are sensitive to the nature of the nucleic acid template. A-II was found to be a double-strand specific adduct. The crystal structure of this adduct has been determined, providing ultimate evidence for the N3 connectivity of platinum. A-II crystallizes in the triclinic space group P in the form of centrosymmetric dimers, {[Pt(en)(ACRAMTU-S)(adenine-N3)]2}6+. The cations are stabilized by a combination of adenine-adenine base pairing (N6...N1 2.945(5) A) and mutual acridine-adenine base stacking. Tandem mass spectra and 1H chemical shift anomalies indicate that this type of self-association is not merely a crystal packing effect but persists in solution. The monofunctional platination of adenine at its N7, N3, and N1 positions in a significant fraction of adducts breaks a longstanding paradigm in platinum-DNA chemistry, the requirement for nucleophilic attack of guanine-N7 as the principal step in cross-link formation. The biological consequences and potential therapeutic applications of the unique base and groove recognition of PT-ACRAMTU are discussed.     

Raman spectrum of n-C23H48 and n-C44H90 at high pressures: Fermi resonance between the CH2 deformation and bending modes

Resonance interaction in the deformation (1400 to 1500 cm^?1) region of the Raman spectrum of n-C₂₃ H₄₈ and n-C₄₄H₉₀ at high pressures are reported. Implications of these results concerning the interpretation of the corresponding bands of the Raman spectrum of crystalline polyethylene are discussed.     

Dibenzotetraaza crown ethers: a new family of crown ethers based on o-phenylenediamine

Dibenzotetraaza (DBTA) crown ethers possess two o-phenylenediamine moieties. They are homologues of dibenzo crown ether phase-transfer catalysts and were prepared from the condensation of benzimidazoles with oligo(ethyleneglycol) dichlorides and oligo(ethyleneglycol) ditosylates. Compounds with ring sizes ranging from 18-crown-6 to 42-crown-14 were prepared. In addition, various altered benzimidizoles were used to produce DBTA crown ethers with modified substituents and ether bridges, as well as benzimidazolidine crown ethers. The synthetic approach presented here proved to be a convenient route to a new family of crown ethers with overall yields of up to 48% based on the benzimidazole. Yields for the ring-closing step were generally high, ranging from 51% to 94%, without the need for high-dilution conditions. Reaction of the DBTA crown ethers with alkyl and benzyl halides was found to be a facile way to obtain the corresponding tetra(N-organyl) compounds. Picrate extraction studies were carried out to determine phase-transfer catalytic capabilities. Extraction efficiencies for alkali-metal ions were lower than those for dibenzo-18-crown-6. Efficiencies were higher for other metal ions, with some selectivity for Pb(2+). Tetra(N-methyl) DBTA-18-crown-6 generally exhibited higher extraction efficiencies than its N-H analogue, but the selectivity was lower.     

Solid-phase synthesis of the cyclic lipononadepsipeptide [N-Mst(Ser1), d-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin

An optimized solid-phase strategy for the preparation of the cyclic lipononadepsipeptide [N-Mst(L-Ser1), D-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin is reported. The strategy is based on the use of a mild orthogonal protection scheme and the incorporation of the nonproteinogenic amino acid (Z)-Dhb into the peptide chain as the dipeptide Fmoc-Thr(tBu)-(Z)-Dhb-OH. The didehydrodipeptide was synthesized by a water-soluble carbodiimide-induced beta-elimination of a protected dipeptide containing a residue of Thr with its free hydroxy side chain unprotected.     

Xe chemical shift tensor in silicalite and SSZ-24

We report, for the first time, a theoretical prediction of the (129)Xe nuclear magnetic resonance chemical shift tensor of xenon atom in a single crystal of silicalite at near-zero occupancy and the temperature dependence of the Xe NMR chemical shift tensor for the polycrystalline silicalite at maximum occupancy. The former is a measure of the sensitivity of the Xe tensor components to the local structure of the channels without Xe-Xe contributions. The latter is a measure of the sensitivity of the Xe-Xe tensor components to the Xe-Xe distributions, as determined by the Xe-Xe potential function in competition with the Xe-silicalite potential function. Both theoretical predictions can be compared against Xe NMR experiments: the first against the Xe spectra collected as a function of rotation of the single crystal about the three crystalline axes in a magnetic field, and the second against variable temperature Xe NMR studies (below room temperature) of polycrystalline silicalite at maximum Xe occupancy. With the same parameter set (Xe-O potential and shielding functions), we predict the line shapes of Xe in SSZ-24 zeolite under various conditions of occupancy and temperature.     

Characterization of humic substances: Implications for trihalomethane formation

Humic substances are precursors of carcinogenic trihalomethanes (THMs) formed during disinfection by chlorination in water treatment processes. In an effort to understand the relationship between trihalomethane formation potential (THMFP) and physicochemical properties of humic substances, UV-visible absorbance, fluorescence in emission and synchronous scan modes, and NMR spectra were measured for several aquatic fulvic and humic acids. For comparison, a soil fulvic acid was also examined using these methods. The feasibility of the gradient modified spin-echo (GOSE) NMR experiment to selectively measure singlet resonances arising from isolated protons was examined. In addition, diffusion coefficients were measured for DMSO solutions of the fulvic acids using BPPLED and GOSE-edited pulse sequences. Although none of the methods tested produced results that correlated with THMFP, the GOSE intensities determined for different regions of the NMR spectra did reflect the relative abundance of different types of functional groups produced by lignin oxidation. In addition, the GOSE-edited diffusion results suggest that the isolated protons, those most reactive to chlorination, are more likely contained in the larger molecular weight fractions of fulvic acids.