Preparation and properties of polyurethane networks based on α,ω-difunctional poly(hexafluoropropylene oxide)

Poly(hexafluoropropylene oxide), poly(HFPO), networks were prepared from functional polymers by end linking via urethane groups. The prepolymers were characterized by NMR spectroscopy and GPC. The networks were characterized by determination of the number of network chains from the shear modulus, and were snown to contain both trifunctional crosslinks and difunctional links. The properties of the networks were investigated by a range of techniques. Compared with fully-fluorinated networks formed via triazine cross-links, investigated previously, the urethane-linked networks were more readily prepared but were poorer elastomers, were less thermally stable, and were less resistant to swelling by common polar solvents. © 1995 John Wiley & Sons, Inc.     

Efficient electrospray ionization from polymer microchannels using integrated hydrophobic membranes

A simple process for realizing stable and reliable electrospray ionization (ESI) tips in polymer microfluidic systems is described. The process is based on the addition of a thin hydrophobic membrane at the microchannel exit to constrain lateral dispersion of the Taylor cone formed during ESI. Using this approach, ESI chips are shown to exhibit well-defined Taylor cones at flow rates as low as 80 nL min(-1) through optical imaging. Furthermore, stable electrospray current has been measured for flow rates as low as 10 nL min(-1) over several hours of continuous operation. Characterization of the electrospray process by optical and electrical monitoring of fabricated ESI chips is reported, together with mass spectrometry validation using myoglobin as a model protein. The novel process offers the potential for low-cost, direct interfacing of disposable polymer microfluidic separation platforms to mass spectrometry.     

Esters of 5-carboxyl-5-methyl-1-pyrroline N-oxide: a family of spin traps for superoxide

Apparent rate constants, at acidic pH and neutral pH for the reaction of a family of ester-containing 5-carboxyl-5-methyl-1-pyrroline N-oxides with superoxide (O2*-) were estimated, using ferricytochrome c as a competitive inhibitor. It was of interest to note that the rate constants were similar among the different nitrones and not that significantly different from that found for 5-(diethoxyphosphoryl)-5-dimethyl-1-pyrroline N-oxide. At acidic pH, the rate constant for spin trapping O2*- was 3-fold greater than that at physiological pH. Subsequent experiments determined the half-life of aminoxyls, derived from the reaction of these nitrones with O2*-. The EPR spectra were modeled by using a global analysis method. The results clearly demonstrated that EPR spectra of all the aminoxyls were inconsistent with a model that included a single gamma-hydrogen splitting. A better interpretation modeled them as two diastereomers with identical nitrogen splittings and slightly different beta-hydrogen splittings. Detailed line width analyses slightly favored an equal line width-unequal population ratio for the two diastereomers.     

Polyfluorocycloalkenes. Part XVIII. Aryl adducts of decafluorocyclohexene

Decafluorocyclohexene reacted slowly with aniline to give 1-phenylamino- 3-phenyliminoheptafluorocyclohex-2-ene, which was hydrolysed by hydrochloric acid to 3-phenylaminoheptafluorocyclohex-2-enone. Decafluorocyclohexene reacted stepwise with phenyl lithium, giving 1-phenylnonafluorocyclohexene and thence 1,2-diphenyloctafluorocyclohexene: the former product was attacked slowly by pentafluorophenyl lithium at ?40°C affording 1-pentafluorophenyl- 1-phenyloctafluorocyclohexene. Phenyl lithium reacted sluggishly with bis(pentafluorophenyl)octafluorocyclohexene to give 1-pentafluorophenyl-2-(2′,3′,5′,6′-tetrafluoro-1′-biphenylyl)octafluorocyclohexene and 1,2-bis(2′,3′,5′,6′-tetrafluoro-1′-biphenylyl)octafluorocyclohexene. 1,2-Diphenyloctafluorocyclohexene and 1,2-bis(pentafluorophenyl) octafluorocyclohexene were fluorinated by cobalt(III) fluoride to give the olefin, 1,2-bis(undecafluorocyclohexyl)octafluorocyclohexene.     

Development and validation of an analytical method for detection of estrogens in water

An analytical procedure enabling routine analysis of four environmental estrogens at concentrations below 1 ng L^–1 in estuarine water samples has been developed and validated. The method includes extraction of water samples using solid-phase extraction discs and detection by gas chromatography (GC) with tandem mass spectrometry (MS–MS) in electron-impact (EI) mode. The targeted estrogens included 17- and 17-estradiol (aE2, bE2), estrone (E1), and 17-ethinylestradiol (EE2), all known environmental endocrine disruptors. Method performance characteristics, for example trueness, recovery, calibration, precision, accuracy, limit of quantification (LOQ), and the stability of the compounds are presented for each of the selected estrogens. Application of the procedure to water samples from the Scheldt estuary (Belgium – The Netherlands), a polluted estuary with reported incidences of environmental endocrine disruption, revealed that E1 was detected most frequently at concentrations up to 7 ng L^–1. aE2 was detected once only and concentrations of bE2 and EE2 were below the LOQ.Presented at the 9th FECS Conference on Chemistry and the Environment, Bordeaux, France, 29 August–1 September 2004     

Determination of atrazine, its degradation products and metolachlor in runoff water and sediments using solid-phase extraction

In order to determine the fate of the herbicides atrazine (as well as some of its degradation products) and metolachlor in water and sediments, a method was developed to extract and analyse these compounds. The two matrices were separated completely by centrifugation followed by filtration using nylon filters (0.45 mum). Sediments were extracted with a mixture of methanol-0.1N hydrochloric acid (50:50, v/v) using a wrist-action shaker. Filtered water and extracts of sediments were adjusted to pH 4, then concentrated and purified onto two solid-phase extraction cartridges using in tandem C(18) bonded phase column atop sulfonic acid bonded column (SCX). Atrazine, deethylatrazine, deisopropylatrazine and metolachlor retained by the C(18) column were eluted with ethyl acetate. Chlorodiaminotriazine and hydroxyatrazine retained by the SCX column were eluted with a 50:50 (v/v) acetonitrile-0.1M Na(2) HPO(4) aqueous solution (pH 8.5). The extracts were quantified by high performance liquid chromatography with diode array detector (HPLC-DAD) and by gas chromatography with nitrogen-phosphorus detector (GC-NPD). Overall percent recoveries were about 75% and detection limits were between 0.05 and 0.15 microg/l., and 0.5 and 1.5 microg/kg for water and sediments, respectively.     

Effects of chain length and heat treatment on the nanotribology of alkylsilane monolayers self-assembled on a rough aluminum surface

The conformational order of alkylsilane monolayers self-assembled on a rough aluminum surface is affected by the molecular chain length and the thermal history of the sample. These monolayers have been characterized by grazing angle FTIR spectroscopy. Tribological mechanisms were explored using initial molecular conformation order, sliding distance, normal load, and substrate compliance as experimental variables. Results indicate that the initial conformational disorder of the molecules determines the level of friction at the commencement of sliding. Adverse changes in dynamic friction and monolayer life during sliding are not thermally induced but are related to substrate roughness and local plasticity. Plastic deformation reduces the spatial density of the alkylsilane monolayer and is accentuated by an increase in the normal load.     

The benzoylation of uracil and thymine

Uracil and thymine react with benzoyl chloride in acetonitrile-pyridine solution at room temperature to give first their 1-$\text{N}$-benzoyl (2b and 3b) and then their 1-$\text{N}$, 3-$\text{N}$-dibenzoyl derivatives (4a and 4b, respectively); the latter compounds are converted into the corresponding 3-$\text{N}$-benzoyl derivatives (5a and 6a) under mild conditions of basic hydrolysis.     

Graphical aids and scanning modes for tandem mass spectrometry

In tandem mass spectrometry, where typically one analyser is used to study the reactions of ions selected by another analyser from a mixture leaving the ion source, the output contains an additional dimension of information compared to that from conventional mass spectrometry. The increase in dimensionality tends to make the results less easy to assimilate and interpret, but the difficulties may be overcome in large measure by presenting the results in an appropriate graphical form. This review deals with the use of graphical representations of three-dimensional data to display the results of experiments in tandem mass spectrometry. Perspective diagrams or contour maps can be used to show the identity of the parent and daughter ions for all of the reactions occurring in a tandem mass spectrometer, including reactions of positive ions, reactions of negative ions and charge inversion reactions. A graphical approach is particularly valuable when double focusing mass spectrometers are used for tandem mass spectrometry, because it can make it much easier to establish the origin of the ions contributing to an observed peak and thus to determine whether interference is occurring. Factors bearing on the choice of a coordinate system are discussed. Relationships characterizing the more important simple and linked scanning modes are listed and the features to which they correspond in two selected coordinate systems are shown. Factors that influence the resolution of neighbouring peaks by sector field tandem mass spectrometers are discussed.     

Rates of base-catalysed cleavage of pyridyl-, quinolyl-, picolyl- and (quinolylmethyl)-trimethylsilanes

Rates of cleavage of some picoyl- and (quinolylmethyl)-trimethylsilanes (RSiMe₃, where R = PyCH₂ or QnCH₂SiMe₃) have been measured in “90%” aqueous methanolic sodium methoxide at 50°C. Relative reactivities are: 2-PyCH₂, 1.0; 3-PyCH₂, 0.030; 4-PyCH₂, 8.9; 2-QnCH₂, 41; 3-QnCH₂, 0.161; 4-QnCH₂, 37. The rates correlate well with those for base-catalysed hydrogen-exchange in the parent carbon acids RH. Approximate pK_a's (based on the scale of ion-pair acidities in CsNHC₆H₁₁H₂NC₆H₁₁, with pK_a of 9-phenylfluorene = 18.6) for the carbon acids, RH, can be derived as follows: 2-PyCH₃, 29.5; 3-PyCH₃, 34; 4-PyCH₃, 27; 2-QnCH₃, 25; 3-QnCH₃, 32; 4-QnCH₃, 25.Rates of cleavage of pyridyl- and quinolyl-trimethylsilanes (PySiMe₃ and QnSiMe₃) by sodium hydroxide in 4 : 1 v/v Me₂SO/H₂O at 50°C have also been measured; and the relative reactivities are: 2-Py, 1.0; 3-Py, 2.9; 4-Py, 8.4; 2-Qn, 15.9; 3-Qn, 12.7; 4-Qn, 184. The sequence of reactivity differes from that for base-catalysed hydrogen-exchange at the relevant positions of pyridine and quinoline, indicating that the reactivities are not determined in both cases (if in either) solely by the stabilities of the corresponding carbanions.