Catalysis by Using TiO2 Nanoparticles and Nanotubes

TiO2 has attracted considerable attention due to its stability, non-toxicity, low cost, and great potential for use as a photocatalyst in environmental applications. Since strong metal-support interaction (SMSI) of titania-supported noble metals was first reported in 1978, titania supported catalyst has been intensively studied in heterogeneous catalysis. However, the effective catalytic activity was restricted due to the low surface area of TiO2. Recently, TiO2-based nanotubes were extensively investigated because of their potentials in many areas such as highly efficient photocatalysis and hydrogen sensor.In the present study, formation of titanium oxide (TiO2) nanotubes was carried out by hydrothermal method, with TiO2 nanoparticle-powders immersed in concentrated NaOH solution in an autoclave at 110 ℃. Preparation of nano-size Pt on TiO2-nanoparticles or TiO2-nanotubes was performed by photochemical deposition method with UV irradiation on an aqueous solution containing TiO2 and hexachloroplatinic acid or tetrachloroauric acid. The TEM micrographs show that TiO2-nanotubes exhibit ～300 nm in length with an inner diameter of ～ 6 nm and the wall thickness of ～ 2 nm, and homogeneous nanosize Pt particles (～ 2 nm) were well-dispersed on both nanoparticle- and nanotube- titania supports. It also shows the nanotube morphology was retained up2o n Pt-immobilization. Nitrogen adsorption isotherm at 77K resulted a high surface area (～ 200m/g) of TiO2-nanotubes, which is about 40 times greater than that of "mother" TiO2 nanoparticles (～5 m/g). All the spectroscopic results exhibited that the nanotube structure was not significantly affected by the immobilized Pt particles. Ti K-edge XANES spectra of TiO2 nanotube and Pt/TiO2-nanotube represent that most titanium are in a tetrahedral coordination with few retained in the octahedral structure.In the in-situ FT-IR experiments, an IR cell was evacuated to a pressure of 10-5 torr at room temperature as soon as the catalyst-pellet, Pt/TiO2 or Pt/TiO2-nanotube, was placed inside the cell.Then, 60 torr of hydrogen was introduced into the cell and subsequently the temperature was programmed to increase from room temperature to 300℃ at a constant heating rate of 5℃/min.For Pt/TiO2, an IR peak at 2083 em-1 started to appear at 200℃ with a maximum intensity at 250℃ and then decreasing as temperature increased. The 2083 em-1 IR peak corresponds to the linearly adsorption of CO on the well-dispersed Pt sites. Simultaneously, the IR bands of gaseous methane at 3016 em-1 started to appear at 225℃ and the peak intensity increased with temperature. The results reveal that Pt/TiO2 can adsorb gaseous CO2 and further catalyzes the reduction of CO2 by H2 through the intermediate CO, which further produces gaseous methane. While for the Pt/TiO2-nanotube catalyst, methane was produced at relatively low temperature, 100℃, and it catalyzed the direct conversion of CO2 to CH4. The absence of intermediate CO-adsorption signals durinng the temperature programmed process indicates that the prepared TiO2 nanotube-supported nanosize Pt possesses a potent capability for CO2 adsorption and highly catalytic activity in the hydrogenation of CO2, and was superior to the conventional Pt/TiO2 catalyst. The catalytic activity of Pt/TiO2-nanotube was indeed significantly enhanced by the high surface area of TiO2-nanotubes.Details will be discussed.     

Spiro(benzoxasilole) catalyzed polymerization of oxetane derivatives

A spiro(benzoxasilole) catalyst, 3,3,3′,3′-tetrakis(trifluoromethyl)-1,1′-(3H,3H′)-spirobis(1,2-benzoxasilole) was used to polymerize 3,3-R,R′-oxetanes: BEMO (R, R′ = ethoxymethyl), AMMO (R = azidomethyl, R′ = methyl), NMMO (R = nitratomethyl, R′ = methyl), BAMO (R, R′ = azidomethyl), and BCMO (R, R′ = chloromethyl) with descending rates in this order. ³¹P-NMR of polymerization mixtures quenched using Bu₃P are consistent with an oxonium ion propagating species. Water is not a cocatalyst because it increases the induction period which is not eliminated by the proton trap 2,6-di-t-bu-tylpyridine. The propagating chains were terminated by transfer with the ether oxygen of the polymer either intermolecularly or intramolecularly. The index of propagation to chain transfer, Kk_ik_p/k_tr, varies over more than three orders of magnitude for BEMO > AMMO > NMMO > BAMO. However, k_p/k_tr for the four monomers differ by less than a factor of five indicating the same factors are affecting propagation and chain transfer. Addition of benzyl alcohol and propandiol produced poly(BEMO) having one and two hydroxyl termini, respectively. These telechelic polymers can be used to synthesize linear triblock or multiblock copolymers of oxetane derivatives. © 1992 John Wiley & Sons, Inc.     

ansa-Zirconocenium catalysis of syndiospecific polymerization of propylene: Theory and experiment

The syndiospecific propylene polymerizations catalyzed by isopropylidene(cyclopentadienyl)(fluorenyl)- and (2,2-dimethylpropylidene)(cyclopentadienyl)(fluorenyl)-zirconocenium ( 1 ⁺ and 2 ⁺) have been investigated theoretically and compared with experimental observations. With the ab initio calculated structures for the transition state (TS) of 1 ⁺(M)P and 2 ⁺(M)P (M = propylene, P = 2-methylpentyl), their steric energies (E°) have been computed using MM2 force-field. The difference between steric energies E°(m) and E°(r) for the meso and racemic enchainment of propylene, respectively, is defined as the stereocontrol energy [δE°(m ? r)] for syndiotactic propagation. The δE°(m ? r) for the TS of 1 ⁺ (M)P is about 2.1 kcal/mol, the value is 1 kcal/mol greater for 2 ⁺(M)P. The observed steric pentad distributions of the syndiotactic poly(propylene) obtained by these catalysts are consistent with smaller effective stereocontrol energy, which is about two-third as large as δE°(m ? r) values calculated for the MM2 optimized structure. Syndiotactic enchainment is favored over isotactic enchainment for all combinations of site configurations in the catalyst. α-Agostic interaction seems to enhance syndioselectivity, whereas γ-agostic interaction changes the stereoselectivity to meso enchainment. The mirror plane symmetry of the syndiotactic propagating species renders the stereoselectivity of the polymerization insensitive to reaction conditions. These catalysts are also highly regiospecific. © 1995 John Wiley & Sons, Inc.     

Determination of terazosin by cloud point extraction-fluorimetric combined methodology

A new sensitive and selective preconcentration-fluorimetric method for determination of terazosin based on its native fluorescence was developed. The analyte, initially present in aqueous matrix, was treated with an extractive non-ionic surfactant solution and separated by the clouding phenomenon. The optimum analytical conditions for terazosin assay were established. Under these conditions, linear calibration curves were obtained over the range of 1 × 10⁻⁵ to 7.0 μg mL⁻¹ with detection and quantification limits of 1.11 × 10⁻⁵ and 3.7 × 10⁻⁵ μg mL⁻¹, respectively. Additionally, the binding constant (K_B) for the terazosin-PONPE 7.5 system was determined given a value of 1028 L mol⁻¹. The developed coupled methodology, which thoroughly satisfies the typical requirements for pharmaceutical control processes, was proved to be appropriate for monitoring terazosin in actual pharmaceutical formulations and biological fluid sample. The results were validated by recovery test and by comparison with other reported methods, being highly satisfactory.     

Four new podocarpane-type trinorditerpenes from the bark of Taiwania cryptomerioides

Further studies on the bark of Taiwania cryptomerioides found four new podocarpane derivatives, 1beta,13-dihydroxy-8,11,13-podocarpatriene (1), 14,18-dihydroxy-13-methoxy-8,11,13-podocarpatriene (2), 1beta,14-dihydroxy-13-methoxy-8,11,13-podocarpatriene-2,7-dione (3), and 3beta,14-dihydroxy-13-methoxy-8,11,13-podocarpatrien-7-one (4), together with a known 1beta,13,14-trihydroxy-8,11,13-podocarpatrien-7-one (5). Those structures were elucidated principally from spectral evidence.     

Polymer reactions. V. Kinetics of autoxidation of polypropylene

The rate constants for the autoxidation of polypropylene were determined by a combined ESR, volumetric, and chemical method. The values of k_i, k_p, and k_t at 110°C. are 3 × 10^?4 sec.^?1, 1.9 l./mole-sec., and 3 × 10⁶ l./mole-sec., respectively. The values of k_i and its activation energy are the same as those for the decomposition of polypropylene hydroperoxide, thus identifying the latter as the principal initiation process. The values of the temperature-independent k_t suggest that secondary peroxy radicals are the terminating species. The rate constants are compared with rate constant ratios for initiated autoxidations of squalane and other related systems.     

Development of enzyme biosensor based on pH-sensitive field-effect transistors for detection of phenolic compounds.

This article describes a biosensor based on pH-sensitive field-effect transistors (pH-FETs) as transducer, and immobilised enzyme tyrosinase as biorecognition element, which was used for the determination of phenolic compounds in water solutions. The biologically active membrane was formed by cross-linking of tyrosinase with bovine serum albumin (BSA) in saturated glutaraldehyde (GA) vapours on the sensitive transducer surface. The main analytical characteristics were studied under different conditions as well as the possibility to optimise these working parameters. Different factors such as the pH of immobilisation, the enzyme loading, the time of exposition to glutaraldehyde vapours were investigated in regards to the influence on sensitivity, limit of detection, dynamic range, and operational and storage stability.     

A systematic study of magnetic order in divalent europium perovskites

The magnetic properties of a series of cubic perovskite materials, Eu(Al_0.5Ta_0.5)O₃, Eu(Mg_0.5W_0.5)O₃, and Eu(Lu_0.5Ta_0.5)O₃ have been investigated using bulk magnetic and Mössbauer techniques. Eu(Al_0.5Ta_0.5)O₃ is a ferromagnet (T_c ～ 5°K, θ_c = + 8°K), Eu(Lu_0.5Ta_0.5)O₃ is an antiferromagnet (T_N = 4.0, θ_c = ?8°K), while Eu(Mg_0.5W_0.5)O₃ is probably antiferromagnetic (T_N = 2.8°K, θ_c = ? 1°K). These data are compared with the known properties of EuLiH₃ and EuTiO₃ and a sharp drop in θ_c as a function of increasing lattice constant is noted. A molecular field theory analysis of the data yields two possible sets of nn (J₁) and nnn (J₂) exchange constants for each compound which are compared with existing theories.     

In vivo activation analysis of organ cadmium using the Tsing Hua Mobile Educational Reactor

This work describes a nuclear facility forin vivo prompt gamma activation analysis (IVPGAA) using a moderated neutron beam from a 0.1 W Tsing-Hua Mobile Educational Reactor (THMER). The IVPGAA measurement is a new technique for toxic cadmium determination in organs, which can efficiently be used in clinical diagnosis. The low-power nuclear reactor provides a total neutron flux of 3.3·10⁴ n·cm^–2·s^–1 on the surface of the central vertical neutron beam tube to which a liquid phantom is positioned. The capability of such partial-body irradiation facility is demonstrated. The detection limit of cadmium in the left kidney for a skin dose equivalent of 1.66 mSv (166 mrem) was 1.34 mg in a 500-s irradiation/counting period, and the sensitivity in the left kidney was 103 counts mg^–1·mSv^–1. The performance of IVPGAA system using the THMER nuclear facility therefore has the advantages of mobility and feasibility with high sensitivity under low neutron and gamma doses.     

Radiolysis of resist polymers. IV. Poly(p-substituted-α-methylstyrene)s

The effect of parasubstituents on the radiation chemistry of poly(α-methylstyrene) (PMS) was compared for the fluoro (PFMS), chloro (PCMS), bromo (PBMS), isopropyl (PiPMS), and methoxy (PMeOM) derivatives. Radiolysis yields, ESR spectra, and GC? MS analysis of products were obtained. PMS and PFMS have similar low radiolysis yields, products, and product distributions. Only main-chain radicals which persist to 200° were observed. PCMS has increased values of G_s, G_x, and G_r. The product analysis results suggest that the presence of chlorine contributes to the primary process by dissociative electron capture and enhances the cleavage of α-methyl group. Irradiation of PBMS caused crosslinking and yielded few volatile products. PMeOMS and PiPMS gel readily by γ-irradiation and may be useful as negative radiation resists.