Noise waveforms with repetitive phase and nonrepetitive amplitude

By use of frequency-shifted feedback lasers, noise with a stationary amplitude and a periodically stationary phase is generated. The ensemble-averaged time correlation function is periodic, whereas the power spectrum is broadband, resulting in a waveform that does not obey the Wiener-Khintchine relations. An application to multiple-access communications is discussed.     

Effective synthesis of carbon nanotubes via catalytic decomposition of methane: Influence of calcination temperature on metal–support interaction of Co–Mo/MgO catalyst

The present work investigated the influence of calcination temperature for bimetallic Co–Mo/MgO catalyst on the synthesis of carbon nanotubes (CNTs) via catalytic chemical vapor deposition (CCVD) of methane. The experimental results showed that variation in the catalyst calcination temperature affected carbon yield, diameter distribution and quality of the CNTs. Increasing the catalyst calcination temperature enabled Co–Mo/MgO catalysts in growing CNTs at higher yield, narrower diameter distribution and better degree of graphitization, credited to the strong metal–support interaction (MSI) formed between CoO species and MgO support. We also discovered that the catalysts of weak MSI were beneficial to the nucleation and growth of CNTs, meanwhile the catalysts with strong MSI provoked the growth of CNTs with narrow diameter distribution. The catalyst calcined at 700 °C, possessing moderate MSI, was found to be the most suitable catalyst for the growth of high quality CNTs with the diameter of 7.70±0.77 nm and the carbon yield of as high as 647.4%.     

An original approach for Raman spectroscopy analysis of radioactive materials and its application to americium‐containing samples

An approach for Raman measurements of highly radioactive samples is presented here. The innovative part of this approach lies in the fact that no single part of the Raman equipment is in direct contact with the radioactive sample, as the sample is sealed in an alpha‐tight capsule. Raman analysis is effectively performed through the optical‐grade quartz window closing the capsule. This allows performing micro‐Raman measurements on radioactive samples with no limitations on the laser source wavelength, polarisation mode, spectrometer mode and microscope mode (provided the focal length of the microscope objective is greater than the thickness of the quartz window and with sub mg samples). Some example results are shown and discussed. In particular, some spectral features of americium‐containing oxide nuclear fuel specimens are presented. Raman spectra clearly reveal in these specimens the presence of abundant oxygen defects induced in the fcc fluorite lattice by trivalent americium. In order to complete the analysis the Raman spectrum of pure americium dioxide was also measured with a lower energy excitation source compared with previous research. The current results seem to be consistent with the possible occurrence of a photolysis process induced by the Raman laser, resulting in the formation of hyperstoichiometric americium sesquioxide Am₂O_{3 + z}. Such a photolytic process is deemed to be unavoidable when visible lasers are used as excitation sources for the Raman analysis of americium dioxide. © 2015 The Authors Journal of Raman Spectroscopy Published by John Wiley & Sons, Ltd.     

Ag‐doped TiO2 enhanced photocatalytic oxidation of 1,2‐cyclohexanediol

The superiority of silver‐doped titania for photocatalytic oxidation (PCO) of organic compounds inspired us to investigate PCO of 1,2‐cyclohexanediol. Ag/TiO₂ was prepared, characterized (nanosize 19–24 nm) and used for oxidation of 1,2‐cyclohexanediol (1) in acetonitrile. The photolysate was analyzed using GC and GC/MS techniques. The PCO products are 2‐hydroxylcyclohexanone (2), 1,2‐cyclohexandione (3), 2‐cyclohexenone(4), cyclohexanone (5), and adipic acid (6).The formation of electron–hole pair at the surface of the catalyst followed by oxidation reactions was the suggested mechanism. Kinetic studies revealed first‐order mechanism for PCO of 1 and rate constant (k) = ?0.145 h^–1. Copyright © 2012 John Wiley & Sons, Ltd.     

Magnetocaloric properties in the Cr-doped La0.7Sr0.3MnO3 manganites

Single-phase polycrystalline samples of La_0.7Sr_0.3Mn_1-xCr_xO₃ with nominal composition of x=0.00, 0.20, 0.40 and 0.50 were prepared by a conventional solid-state reaction method in air. Investigations of magnetization were carried out in the temperature range 5-400 K and magnetic field range 0-8 T. It was found that the Curie temperature T_C decreases with increasing x and the maximum magnetic entropy change (−ΔS_M) for x=0.20 is ∼1.203 and ∼2.653 J/kg K, respectively for 2 and 6 T magnetic field near the temperature of 280 K.     

Synthesis and characterizations of Ho2O3 modified SrBi2Nb2O9 ceramics

SrBi_2-xHo_xNb₂O₉ (0?≤?x?≤?0.5) ceramics were prepared through the conventional solid state route. The materials have been characterized by XRD, FTIR and SEM. All compounds were pure and well crystallized. In FTIR spectroscopy, the spectral patterns of the crystal structures of these polyphases are unique and smoothly different from each other. The grains were prone to become spherical with increasing x. Dielectric and electrical properties of these materials as a function of temperature at different frequencies have been carried out. The dielectric constant and dielectric loss were found to decrease with an increase of the holmium concentration at room temperature. Reaching up to x?=?0.4 and x?=?0.5, the diffusivity increases, leading to the occurrence of relaxor behavior. 20–30 at.% Ho doping on the Bi-site can fill up the oxygen vacancies and decrease the AC conductivity. However, at higher doping levels greater than 40% holmium oxide, the AC conductivity is found to increase.     

Sulphide based anode material for lithium rechargeable battery

In this study, lead sulphide (PbS) was prepared by the chemical bath deposition technique. The sample was characterized by X-ray diffraction (XRD), Energy Dispersive Analysis of X-rays (EDAX) and cyclic voltammetry. EDAX spectrum shows peaks attributable to lead and sulphur. The EDAX analysis also shows that the prepared sample is stoichiometric. Cyclic voltammetry experiments were recorded at 100 mV·s⁻¹ and 400 mV·s⁻¹ scan rates. Results show that the rate controlling electrochemical reaction is electron transfer. The presence of redox waves shows that the lithium intercalation and deintercalation can occur as a result of lattice expansion in PbS. There were no differences in the PbS XRD data before and after the cyclic voltammetry experiments indicating that the PbS structure is not modified upon lithium ion intercalation and deintercalation in PbS. The discharge characteristics for 35 cycles of the cell using the LiCoO₂/PbS couple is presented indicating the possible development of such materials as anode in lithium ion cells.     

Electrical and chemical characteristics of nano-meter gold encapsulated in mesoporous and microporous channels and cages of FSM-16 and Y zeolites

The dc and ac conductivities as well as the dielectric constant () were measured for different zeolites encapsulated gold (AuCl₃) samples at different temperatures (300-500 K) and various frequencies (5 kHz-1 MHz). The conductivity was found to change in the order Au/FSM-27>Au/NaY>Au/FSM-47. Sorbed water contained inside zeolites assists greatly the proton mobility (zeolite protons) and the ion mobility (Na⁺ and Au⁺) and hence enhance the electric conduction in the temperature range 300-373 K. Raising the temperature over 373 K induces dehydration effect that assists the metallic gold formation and thus a dramatic loss in conductivity was revealed. The conduction mechanism was expected to be partially ionic and partially electronic. The IR study showed that the exposure of Au zeolites to CO gas produced a characteristic band of Au⁺-CO at 2180 cm⁻¹ that tends to decrease with temperatures and even vanishes at 376 K in favor of Au⁰-CO at 2128 cm⁻¹. Similarly, a phase transition at 338 K, that occurs in the range 300-376 K, was confirmed by DTA to further emphasize the temperature regions of either Au⁺ cations (338 K) or Au⁰ (376 K) formation.     

Bistable and self-tunable negative-index metamaterial at optical frequencies

We introduce a metamaterial design composed of square plasmonic loops loaded by Kerr nonlinearities that combines enhanced nonlinear response with strong artificial magnetism, ensuring a negative refractive index with bistable and self-tunable response. We verify with full-wave simulations that positive-to-negative switching of refractive index may be obtained with moderate loss. The design of a finite-size metamaterial prism is also presented, supporting at the same frequency, and for the same light intensity, positive or inverted Snell refraction as a function of its previous excitation history.