On-line coupling of supercritical fluid extraction with high-performance liquid chromatography for the determination of explosives in vapour phases

An investigation into the selectivity of an iminodiacetic acid (IDA) modified silica gel column for transition and heavy metal ions using non-chelating inorganic eluents has been carried out. A number of eluent parameters were investigated to determine the exact retention mechanism taking place and to control selectivity. The parameters studied were eluent ionic strength and the nature of the inorganic salt used, eluent pH and eluent temperature. The results obtained showed how despite certain metal ions exhibiting similar stability constants with the bonded IDA groups, careful control of each of the above parameters, in particular eluent chloride ion concentration and eluent temperature, could result in large changes in selectivity. Optimal conditions for the isocratic and gradient separation of Mg(II), Ca(II), Mn(II), Cd(II), Co(II), Zn(II) and Pb(II) were determined. An isocratic method using a 0.035 M KCl, 0.065 M KNO3 (pH 2.5) eluent was successfully applied to the determination of Mn(II), Cd(II), Co(II) and Zn(II) at concentrations between 20 and 121 microg/l in a freshwater certified reference material (NIST 1640).     

Diastereoselective synthesis of α-amino-β-hydroxyacids

threo-α-Dibenzylamino-?-hydroxyesters (2) have been synthesised with high diastereoselectivity through the NaBH₄ reduction of α-dibenzylamino-β-oxoesters (4) and then tranformed into threo-α-amino-β-hydroxyacids.     

Copper(II) complexes of N-terminal protected tri- and tetra-peptides containing histidine residues

Copper(II) complexes of peptides containing two or three histidyl residues (Ac-HisGlyHis-OH, Ac-HisGlyHis-NHMe, Ac-HisHisGlyHis-OH and Ac-HisHisGlyHis-NHMe) have been studied by potentiometric, UV-Vis, EPR and CD spectroscopic measurements. The imidazole nitrogen atoms are described as the primary metal binding sites of all ligands resulting in the formation of various macrochelates in the pH range 4 to 7. The (Nim, N-, Nim)-co-ordinated [CuH-1L]0+ complexes were mainly detected in samples containing free carboxylates at the C-termini, whilst the [CuH-2L]-(0) complexes were the predominant species in slightly alkaline solution and their binding modes were described via 4N-co-ordination (Nim, N-, N-, Nim) in (7,5,6)-membered fused chelate rings. Deprotonation and co-ordination of the third amide nitrogens were detected above pH approximately 9 in all cases.     

Rejuvenating old computerized spectrometric instrumentation: discussion of two case histories

Computerized analytical instruments of late 70's and 80's are facing rapid technological obsolescence, although they are often retaining good analytical performances. Responsibility is to be attributed to the fast advance in computer technology, which is leaving little or no back-compatibility with old standards and data formats. Rejuvenation may be reached by simple hardware and software modifications, to allow data exchange with modern PC's and LIMS. Two typical case histories for spectrometric instrumentation of late 70's are then presented and discussed in a general fashion.     

Purification and partial characterization ofRhizomucor miehei lipase for ester synthesis

A commercialRhizomucor miehei lipase was purified by ammonium sulfate precipitation. Phenyl Sepharose 6 Fast Row hydrophobic interaction chromatography, and DEAE Sepharose Fast Flow anion-exchange chromatography. The recovery of lipase activity was 32% with a 42-fold purification. The molecular size of the purified enzyme was 31,600 Dalton and the pI 3.8. The enzyme was stable for at least 24 h within a pH range of 7.0-10.0, and 96.8% of the enzyme activity remained when kept at 30‡C for 24 h. Further, about 10–30% of the lipase activity was inhibited by K⁺, Li⁺, Ni⁺, Co²⁺, Zn²⁺, Mg²⁺, Sn²⁺, Cu²⁺, Ba²⁺, Ca²⁺, and Fe²⁺ ions and by SDS, but EDTA had no effect. Under the experimental conditions, the optimum temperature for the hydrolysis of olive oil was 50‡C (pH 8.0), and for the synthesis of 1-butyl oleate, 37‡C. It was concluded that hydrolytic activity of lipase alone is not a sufficient criterion for its synthetic potential. The optimal molar ratio of oleic acid and 1-butanol was 2:1 for 1-butyl oleate synthesis. The 1-butyl oleate yield was unaffected by purification of the enzyme after 12 h.     

High-density lipoproteins contribute to the alpha-1-globulin zone in capillary electrophoresis of human serum proteins

Alpha-1-antitrypsin (AAT) and alpha-1-acid glycoprotein (AAG) are reported to be the main proteins contributing to the alpha-1-globulin capillary zone electrophoresis (CZE) zone, but the sum (AAT + AAG) showed lower than the alpha-1-globulin. We investigated the role of high-density lipoprotein (HDL), an additional protein migrating in the alpha-1-globulin zone, as a possible cause for such a gap. In a set of 98 sera we measured the alpha-1-globulin with a dedicated clinical capillary electrophoresis system, and AAT, AAG and apolipoprotein A-1 (ApoA) by immunonephelometry. The alpha-1-globulin were consistently higher than the sum (AAT + AAG), by (mean value +/- standard deviation) 1.70 +/- 0.88 g/L in 49 sera with low ApoA, and by 3.59 +/- 0.75 g/L in 49 sera with high ApoA. Corresponding figures in the comparison alpha-1-globulin/(AAT + AAG + ApoA) were reduced to 1.08 +/- 0.77 g/L and 1.67 +/- 0.70 g/L. It is concluded that HDL significantly contribute to the CZE alpha-1-globulin zone, but do not completely explain the differences between the electrophoretic and the immunochemical measurements. However, CZE alpha-1-globulin measurements give information about increases of the two major acute phase proteins comparable to specific protein measurements.     

High-pressure dissociation of crystalline para-diiodobenzene: optical experiments and Car-Parrinello calculations

We have investigated the high-pressure properties of the molecular crystal para-diiodobenzene, by combining optical absorption, reflectance, and Raman experiments with Car-Parrinello simulations. The optical absorption edge exhibits a large red shift from 4 eV at ambient conditions to about 2 eV near 30 GPa. Reflectance measurements up to 80 GPa indicate a redistribution of oscillator strength toward the near-infrared. The calculations, which describe correctly the two known molecular crystal phases at ambient pressure, predict a nonmolecular metallic phase, stable at high pressure. This high-density phase is characterized by an extended three-dimensional network, in which chemically bound iodine atoms form layers connected by hydrocarbon bridges. Experimentally, Raman spectra of samples recovered after compression show vibrational modes of elemental solid iodine. This result points to a pressure-induced molecular dissociation process which leads to the formation of domains of iodine and disordered carbon.     

Optically active polymers containing side-chain photochromic moieties: Synthesis and chiroptical properties of copolymers of trans-4-(phenylazo)-1-naphthyl acrylate and trans-4-(1-naphthylazo)-phenyl acrylate with (?)-menthyl acrylate

The synthesis of photochromic optically active copolymers from trans-4-(phenylazo)-1-naphthyl acrylate (PANA), or trans-4-(1-naphthylazo)-phenyl acrylate (NAPA), and (?)-menthyl acrylate (MtA) is described. The copolymers prepared, having different contents of trans-phenylazonaphthalene moieties, have been characterized by IR, ¹H-NMR, UV, and GPC techniques. The chiroptical properties have been investigated by circular dichroism (CD) and the induced optical activity on the side-chain trans-phenylazonaphthalene chromophores discussed in terms of different conformational situations of the macromolecules in both the copolymer series. © 1994 John Wiley & Sons, Inc.     

Synthesis of α-Oxo and α-hydroxy-1-benzyl-1,4-dihydro-3(2H)-isoquinolinones

The reaction of some primary amines with the methyl 2-[(α-oxobenzyl)-(α-bromo)methyl]phenylacetate ( 5 ) afforded the isoquinolinones 7a-d , which in turn were hydrogenated to 10a-d . The synthesis of these compounds was designed on the basis of a potential depressant and antiinflammatory activity found in other structurally related compounds.     

Wavy graphene sheets from electrochemical sewing of corannulene

The presence of non-hexagonal rings in the honeycomb carbon arrangement of graphene produces rippled graphene layers with valuable chemical and physical properties. In principle, a bottom-up approach to introducing distortion from planarity of a graphene sheet can be achieved by careful insertion of curved polyaromatic hydrocarbons during the growth of the lattice. Corannulene, the archetype of such non-planar polyaromatic hydrocarbons, can act as an ideal wrinkling motif in 2D carbon nanostructures. Herein we report an electrochemical bottom-up method to obtain egg-box shaped nanographene structures through a polycondensation of corannulene that produces a new conducting layered material. Characterization of this new polymeric material by electrochemistry, spectroscopy, electron microscopy (SEM and TEM), scanning probe microscopy, and laser desorption-ionization time of flight mass spectrometry provides strong evidence that the anodic polymerization of corannulene, combined with electrochemically induced oxidative cyclodehydrogenations (Scholl reactions), leads to polycorannulene with a wavy graphene-like structure.

A bottom-up synthesis of wavy graphene structures obtained through an anodic polymerization process, combined with an electrochemically triggered oxidative cyclodehydrogenation, of the bowl-shaped polyaromatic hydrocarbon corannulene.