Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA

Theoretical concerns about the use of cemented and press-fit stems in revision total knee arthroplasty (TKA) include stress shielding with adverse effects on prosthesis fixation. Radiological studies have showed distal femoral bone resorption after revision TKA. The revision with use of stems can place abnormal stresses. These stresses can promote the effect of bone stress shielding and may contribute to bone loss. Experimental quantification of strain shielding in the distal synthetic femur following TKA is the main purpose of the present study. Three different constructs of TKA were assessed. The first construct included a stemless femoral component. The other two included a press-fit and a cemented femoral stem. Cortical bone strains were measured experimentally with tri-axial strain gauges in synthetic femurs before and after in-vitro knee surgery. The difference between principal strains of implanted and intact femur was calculated for each strain gauge position. This study indicates that the use of stems in distal femur changes the distribution and magnitude of bone strains. The press-fit stem provoked relevant bone area (stem length) subjected to strain shielding and also originated the highest reduction of strains in the distal region, which can potentially induce bone resorption. The stemless implanted femur produced minor bone strain changes relatively to the intact femur. The use of distal femur stems increases initial stability in the bone, but the observed reduction of strains in this region, relative to the intact femur, provokes strain shielding that can induce bone resorption and may compromise the long term implant stability.     

Vapor-particle partitioning of hydrocarbons in Western Mediterranean urban and marine atmospheres

An analytical procedure is described for a comprehensive determination of the composition of hydrocarbons in the atmosphere, based on: (a) aerosol filtration and subsequent adsorption of the vapor phase onto active charcoal and polyurethane foam; (b) GPC and HPLC fractionation of the extracts, and (c) analysis of the fractions by GC-MS under EI and NICI modes. Special emphasis is placed onn-alkanes, PAHs and their oxygenated derivatives.The characterization of samples collected in a coastal urban area (Barcelona city), and far away over the Western Mediterranean, at sea level and at 1100 m of altitude, revealed significant changes in the aerosol composition, mainly attributed to initial vapor-particle partitioning processes, influenced by ambient temperature variations, and to others taking place during long-range atmospheric transport, related with the different compound photoreactivities and with an unexplained source-decoupling phenomenon.     

Selective binding of the cyano group in acrylonitrile adsorption on Si(100)-2 x 1

The covalent binding of acrylonitrile (CH(2)=CH-C triple bond N) and the formation of a C=C-C=N structure on Si(100) have been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and density functional theory (DFT) calculations. For chemisorbed acrylonitrile, the absence of nu(C triple bond N) at 2245 cm(-1) and the appearance of nu(C=N) at 1669 cm(-1) demonstrate that the cyano group directly participates in the interaction with Si(100), which is further supported by XPS and UPS observations. Our experimental results and DFT calculations unambiguously demonstrate a [2 + 2] cycloaddition mechanism for acrylonitrile chemisorption on Si(100) through the binding of C triple bond N to Si dimers. The resulting chemisorbed monolayer with a C=C-C=N skeleton can serve as a precursor for further chemical syntheses of multilayer organic thin films in a vacuum and surface functionalization for in situ device fabrication.     

Chips and Qi: microcomponent-based analysis in traditional Chinese medicine

Over the last 50 years or so Traditional Chinese medicine (TCM) has been subject to intensive basic and clinical research. Although the effectiveness and remarkable safety of TCM have been documented after controlled clinical studies, there are several herbal and animal parts that are toxic or difficult to identify. DNA polymorphism-based assays have recently been developed for the identification of herbal medicines. In this approach, small amounts of DNA are amplified by the polymerase chain reaction and the reactions products are analyzed by gel electrophoresis, sequencing, or hybridization with species-specific probes. With the DNA based identification of TCM materials as an example, chip-based analytical micro devices were developed with the goal of fabricating an integrated device that will enable sample preparation, amplification, and analysis on a single microchip-based device ("lab-on-a-chip"). The application of a silicon-based polymerase chain reaction microreactor and a DNA microarray for the DNA sequence-based identification of toxic medicinal plants is reported here.     

ZIP8 exacerbates collagen-induced arthritis by increasing pathogenic T cell responses

Zinc is a trace element that is essential for immune responses. Therefore, changes in cellular zinc levels in specific immune cells may influence inflammatory autoimmune diseases, such as rheumatoid arthritis (RA). However, the regulation of zinc mobilization in immune cells and its role in the pathogenesis of RA are not fully understood. Thus, we investigated the roles of zinc transporters in RA pathogenesis. We demonstrated that ZIP8 was specifically upregulated in CD4⁺ T cells that infiltrated the inflamed joint and that ZIP8 deficiency in CD4⁺ T cells abrogated collagen-induced arthritis. ZIP8 deficiency dramatically affected zinc influx in effector T cells and profoundly reduced T cell receptor (TCR)-mediated signaling, including NF-κB and MAPK signaling, which are pathways that are involved in T helper (Th) 17 cell differentiation. Taken together, our findings suggest that ZIP8 depletion in CD4⁺ T cells attenuates TCR signaling due to insufficient cellular zinc, thereby reducing the function of effector CD4⁺ T cells, including Th17 cells. Our results also suggest that targeting ZIP8 may be a useful strategy to inhibit RA development and pathogenesis.Subject terms: Autoimmunity, Immunological disorders     

The accurate calculation of dipole moments and dipole polarizabilities using Gaussian-based density functional methods

Dipole moments and static dipole polarizabilities have been calculated for a number of small molecules using the linear combination of Gaussian-type orbitals–local spin density method. The effect of augmenting standard orbital basis sets with polarization functions has been investigated. A set of optimum ζ_d, for use in calculating polarizabilities, has been derived for the first-row atoms C, N, O, and F. The results of this optimized doubly polarized double-zeta basis set compare well with results obtained using a double-zeta basis set augmented by four even-tempered ζ_d polarization functions. The results of the optimized basis set, and a basis set augmented with only a single ζ_d polarization function derived from it, compare very favorably with those obtained from Møller–Plesset perturbation theory and with experimental data. They show a marked improvement on results obtained using standard Hartree–Fock self-consistent-field molecular orbital methods where no treatment of electron-correlation is included.     

Standardization of multi-nuclide mixtures by a new spectrum unfolding method

A new spectrum unfolding method has been applied to double-labeled mixtures with excellent results, while the CIEMAT/NIST method has been used for gels. The convenience of applying both methods has been demonstrated with mixtures containing more than three components.⁹⁰Sr+⁹⁰Y,⁸⁹Sr,²⁰⁴TI,⁴⁵Ca and³⁵S nuclides were combined as three, four and five components, and the different quench values and activity ratios were assayed. The discrepancies between computed and experimental activities were also obtained. Mixtures with some of their components below background have been prepared in order to test low-level activities.     

Nucleation mechanisms and speciation of metal oxide clusters

The self-assembly mechanisms of polyoxometalates (POMs) are still a matter of discussion owing to the difficult task of identifying all the chemical species and reactions involved. We present a new computational methodology that identifies the reaction mechanism for the formation of metal-oxide clusters and provides a speciation model from first-principles and in an automated manner. As a first example, we apply our method to the formation of octamolybdate. In our model, we include variables such as pH, temperature and ionic force because they have a determining effect on driving the reaction to a specific product. Making use of graphs, we set up and solved 2.8 × 10⁵ multi-species chemical equilibrium (MSCE) non-linear equations and found which set of reactions fitted best with the experimental data available. The agreement between computed and experimental speciation diagrams is excellent. Furthermore, we discovered a strong linear dependence between DFT and empirical formation constants, which opens the door for a systematic rescaling.

The self-assembly mechanisms of polyoxometalates (POMs) are still a matter of discussion owing to the difficult task of identifying all the chemical species and reactions involved. The POMSimulator deals with that complexity in an automated manner.