一种基于粒子滤波的测向定位跟踪算法

基于多站测向定位提供的目标辐射源方位角信息,提出了一种基于粒子滤波的测向定位跟踪算法.该算法采用序贯蒙特卡罗的粒子滤波技术,对目标辐射源方位信息进行粒子滤波融合处理,实现了对机动目标辐射源的无源定位跟踪.仿真实验表明,该算法适用于非线性模型和非高斯噪声的目标跟踪,与传统的基于卡尔曼滤波的多传感器融合跟踪算法相比,定位跟踪更为精确,从而对提高战场电子目标定位跟踪和精确打击具有广泛的应用价值.     

大型钢结构人行景观天桥的有限元分析

采用有限元方法对大型钢结构人行景观天桥进行了静力学、温度应力、动力学模态和初步的抗震能力分析,并就桥自重作用下的最大竖向位移和实际观测结果进行了比较,两者是一致的.计算结果表明:人行景观天桥在常规、温度极值改变和多遇地震荷载作用等多种工况下,现有的设计方案具有足够的强度、刚度和抗震能力.     

SPC数据采集与处理系统

SPC数据采集与处理系统实现了SPC数据的计算机采集与处理 ,大大提高了SPC分析的效率与准确性 ,对推动目前国内SPC应用 ,提高产品质量管理水平具有重要的现实意义。本文具体介绍了SPC数据采集与处理系统的结构与组成及软件实现和处理功能。     

ONOO-活性氧的荧光光谱分析进展

系统介绍了ONOO^-活性氧的化学性质，并对其参与的主要化学反应进行了分类和总结．同时，比较了近年来用于ONOO^-检测的方法，并重点论述了荧光光谱分析方法尤其是酶催化动力学荧光分析法在检测ONOO^-活性氧方面的优势和最新的研究进展．     

闹羊花毒素Ⅲ400MHz二维 ~1H NMR的谱研究

闹羊花毒素Ⅲ的结构较为复杂,采用一维1~H NMR 技术难以对谱做明确的指定。本文通过结合使用400 MHz 1~H-1~H 偶合相关、远程增强型的 1~H-1~H 偶合相关和二维 NOE 技术,对标题化合物的1~H NMR 信号的归属问题作了研究,解决了除前人已明确指定的个别信号外的所有其余信号的鉴别和指定。并且,根据二维 NOE 的实验结果,对其相对构型作了证实。这些结果有助于此类化合物的结构和构型的测定。     

纳米级氧化铁的合成及其对六价铬的吸附性能研究

采用溶胶-凝胶法合成了纳米氧化铁,研究了合成条件,并采用TEM对产品进行了表征,测得产品的平均粒径为20-30nm.研究了纳米级氧化铁对Cr（Ⅵ）的吸附.在pH=3.0,吸附比为3.5×10-6:1×10-2（g/g）时,平均吸附效率为95.98％,最大吸附量为398.3μg Cr（Ⅵ）/g.采用2mol/LNaOH可完全洗脱纳米氧化铁所吸附的Cr（Ⅵ）,测定了回收后的纳米氧化铁对Cr（Ⅵ）的吸附效率,结果表明纳米级氧化铁可循环使用,这将为环境污水中Cr（Ⅵ）的治理及研究纳米材料的吸附行为提供参考.     

Chaos Synchronization Criterion and Its Optimizations for a Nonlinear Transducer System via Linear State Error Feedback Control

Global chaos synchronization of two identical nonlinear transducer systems is investigated via linear state error feedback control. The sufficient criterion for global chaos synchronization is derived firstly by the Gerschgorin disc theorem and the stability theory of linear time-varied systems. Then this sufficient criterion is further optimized in the sense of reducing the lower bounds of the coupling coefficients with two methods, one based on Gerschgorin disc theorem itself and the other based on Lyapunov direct method. Finally, two optimized criteria are compared theoretically.     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

过渡金属钼钒砷杂多化合物的合成与TPR,TPD研究

Seven transition metal molybdovanadoarsenic heteropoly compounds have been synthesized and characterized using IR, UV, TG-DTA, pH potential titration techniques. The molecular formulae of these compounds are pro-posed to be H_xM_yAsMO₁₀V₂O₄₀·zH₂O(x=1～3, y=1,2, M=Cr, Mn, Fe, Co, Ni, Cu, Zn).They are all keggin structure. Surface nature of these compounds have been investigated by temperature programmed desorption and temperature programmed reduction techniques. NH₃-TPD results show that in TPD profiles of the compounds there are two desorption peaks corresponding to weak acid sites of desorption, respectively. Desorbing activativon energy and preexponential factor of weak acid site of desorption for compounds have been calculated. H₂-TPR re-sults show that introducting transtion metal to molybdovanarsenic acid, the reduction peak temperatures of H₂-TPR shift regularly with increasing d electron numbers of transition metals. In addition, Zn and Cu heteropoly com-pounds have yet apparent effect of hydrogen spill over.     

Li^＋／MgO上乙烷氧化脱氢制乙烯的研究（Ⅱ）：催化作用机理

借助ＸＲＤ、ＩＲ、ＴＧ等技术对Ｌｉ＾＋／ＭｇＯ进行了表征，结果表明，酸、碱中心的数目，强度、催化性与Ｌｉ＾＋的添加量相关 ，起酸碱作用的表面金属离子、表面低配位氧集团、Ｏ（Ｌ ｉ＾＋Ｏ＾－）是其反应的活性物种，反应机理可能由离子基、游离基协同完成。