无焰燃烧烟密度标准物质的研制

介绍无焰燃烧烟密度标准物质的研制方法。选用合适的α-纤维素作为原材料,经打浆造纸后,作为标准物质候选物,经均匀性检验和稳定性考察合格后,对标准物质进行定值。在无焰燃烧条件下烟密度标准物质的标准值为175,扩展不确定度为8;校正烟密度标准物质的标准值为166,扩展不确定度为8。     

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

The performance of uspported and unsupported molybdenum carbide for the partial oxidation of methane (POM) to syngas was investgated.An evaluation of the catalysts indicates that bulk molybdenum carbied has a higher methane conversion during the initial stage but a lower selectivity to CO and H2/CO ratio in the products.The rapid deactivation of the catalyst is also a significant problem.However,the supported molybdenum carbide catalyst shows a much higher methane conversion,increased selectivity and significantly improved catalytic stability.The characterization by XRD and BET specific area measurements depict an improved dispersion of molybdenum carbide when using alumina as a carrier.The bulk or the supported molybdenum carbide exists in the β-Mo2C phase,while it is transformed into molybdenum dioxide postcatalysis which is an improtant cause of molybdenum carbide deactivation.     

Possible Mechanisms of Intercalation

Recent knowledge of the kinetics and intercalation mechanisms are summarized and accompanied by examples of intercalation reactions of water and ethanol into anhydrous vanadyl phosphate and redox intercalation of alkali metal cations into vanadyl phosphate dihydrate. Three possible mechanisms of intercalation are presented which are based on: (i) a concept of exfoliation of layers; (ii) the formation of stages and randomly stacked layers; (iii) co-existence of intercalated and non-intercalated parts of crystals of the host separated by an advancing phase boundary. The corresponding kinetic curves are ascribed to mechanisms (ii) and (iii).     

Thermal and mechanical properties of PE/organoclay nanocomposites

Polyethylene/montmorillonite clay nanocomposites were obtained via direct melt intercalation. The clay was organically modified with four different types of quaternary ammonium salts. The objective of this work is to study the use of montmorillonite clay in the production of nanocomposites by means on rheological, mechanical and crystallization properties of nanocomposites and to compare to the properties of the matrix and PE/unmodified clay nanocomposites. In general, the tensile test showed that the yield strength and modulus of the nanocomposites are close to the pure PE. Apparently, the mixture with Dodigen salt seems to be more stable than the pure PE and PE/unmodified clay.     

Density Functional Theory and Low-Temperature Matrix Investigations of CO-Loss Photochemistry from [(C<Subscript>5</Subscript>R<Subscript>5</Subscript>)Ru(CO)<Subscript>2</Subscript>]<Subscript>2</Subscript> (R = H,Me) Complexes

The photochemical CO-loss products of the diruthenium complexes [CpRu(CO) ₂]₂ (5; Cp = ⁵-C₅H₅), [Cp*Ru(CO)₂]₂ (5*; Cp* = ⁵-C₅(CH₃)₅) and CpCp*[Ru(CO)₂]₂ (5) have been studied experimentally in low-temperature (96 K) matrices in 3-methylpentane by using IR spectroscopy. It is proposed that all three complexes undergo single-CO-loss chemistry but that the products have different structures. The single-CO-loss product from 5 is proposed to have one bridging and two terminal carbonyl ligands, whereas 5* and 5 generate triply bridged CO-loss products similar to that observed from [CpFe(CO)₂]₂ and [Cp*Fe(CO)₂]₂. Double-CO-loss from 5* and 5* 9 is also apparently observed. Relativistic DFT calculations have been carried out on various isomers of the starting materials and on potential CO-loss products from 5. The calculations suggest that the triply bridged product Cp₂Ru₂(-CO)₃ (6) might have a singlet ground state in contrast to the corresponding diiron complex Cp₂Fe₂(-CO)₃ (3), which has a triplet ground state.     

Mechanism and control of molecular energy flow: a modeling perspective

 Vibrational energy flow in organic molecules occurs by a multiple-time-scale mechanism that can be modeled by a single exponential only in its initial stages. The mechanism is a consequence of the hierarchical structure of the vibrational Hamiltonian, which leads to diffusion of vibrational wavepackets on a manifold with far fewer than the 3N−6 dimensions of the full vibrational state space. The dynamics are controlled by a local density of states, which does not keep increasing with molecular size. In addition, the number of vibrational coordinates severely perturbed during chemical reaction is small, leading to preservation of the hierarchical structure at chemically interesting energies. This regularity opens up the possibility of controlling chemical reactions by controlling the vibrational energy flow. Computationally, laser control of intramolecular vibrational energy redistribution can be modeled by quantum-classical, or by purely quantum-mechanical models of the molecule and control field. Received: 26 July 2002 / Accepted: 30 September 2002 / Published online: 2 December 2002 Electronic Supplementary Material to this paper can be obtained by using the Springer Link server located at http://dx.doi.org/10.1007/s00214-002-0394-2. Acknowledgements. This work was supported by NSF grant CHE 9986670. Correspondence to: M. Gruebele e-mail: gruebele@scs.uiuc.edu     

Evaluation of molecular structure in Langmuir monolayers of zinc stearate and zinc 12-hydroxystearate by IR external reflection spectroscopy

 In situ polarized Fourier transform IR external reflection spectra of Langmuir monolayers of zinc stearate and zinc 12-hydroxystearate on a water surface were recorded for various surface areas, and their molecular structures were estimated. In the zinc stearate monolayer, the wavenumbers and the absorbances of the antisymmetric and symmetric methylene stretching bands did not change during monolayer compression, which means that orientational and conformational changes of the hydrocarbon chain did not occur. However, wavenumber changes of the antisymmetric and symmetric carboxylate stretching bands were observed during surface compression. The change in the binding nature of the zinc cation to the carboxylate group was speculated. Moreover, it was elucidated that the structure of the hydrocarbon chain in the zinc 12-hydroxystearate monolayer was different from that in the zinc stearate monolayer. Received: 21 March 2001 Accepted: 6 July 2001     

Cyclic Conjugation Energy Effects in Polycyclic π-Electron Systems

Summary. The fact that cyclic arrangements of double bonds have a dramatic effect on the behavior of conjugated organic molecules is known since the 19th century. The fact that in monocyclic conjugated systems the size of the cycle and the number of -electrons involved is decisive for their stability (aromaticity) or lack of stability (antiaromaticity) is known since the 1930s. In polycyclic -electron systems several cyclic effects are present simultaneously and their separation became possible only recently. A molecular orbital method has been elaborated, by means of which the energy effects of individual cycles in polycyclic -electron systems can be estimated. This method is briefly outlined and illustrated by pertinent examples. An exhaustive bibliography of the topic considered is given.     

A kinetic method for <Emphasis Type="Italic">para</Emphasis>-nitrophenol determination based on its inhibitory effect on the catalatic reaction of catalase

The inhibitory effect of para-nitrophenol on the catalytic reaction of catalase was investigated. Michaelis-Menten kinetic parameters were determined from Lineweaver-Burk plots obtained in the absence or in the presence of the inhibitor. The inhibitor pattern, revealed by the Lineweaver-Burk plots, suggested a fully mixed inhibition mechanism. Spectrophotometric monitoring of the indicator reaction: in conjunction with initial rate measurements was employed for the kinetic determination of the inhibitor. Calibration plots of initial rate vs. para-nitrophenol concentration were linear in the concentration range 0.9·10⁻⁵–2.5·10⁻⁵ mol/L and the detection limit was 3·10⁻⁶ mol/L (417 μg/L) para-nitrophenol. Interferences from other phenolic compounds like orto-cresole, meta-and orto-nitrophenol were observed.     

Reduction and reconstruction of Co3O4 nanocubes upon carbon deposition

We describe a synthetic investigation on the formation of carbon nanofibers using a preshaped free-standing metal-oxide catalyst (single-crystal cobalt oxide (Co(3)O(4)) nanocubes). In reacting with acetylene (C(2)H(2)) vapor, Co(3)O(4) nanocubes are reduced and reconstructed into metallic cobalt. The resultant metal catalyst with a 2-fold symmetry leads to a bilateral base growth for carbon nanofibers. Our findings indicate that an understanding of catalyst-assisted chemical vapor deposition (CVD) mechanisms can be acquired, when the shape, size, and crystal orientation of pristine metal catalysts are made known to the CVD process. By tracing their evolutional changes in structure and composition, the shape-designed model catalysts may offer new opportunities for mechanistic investigations on the chemical reactivity of nanoparticles, general catalyst-assisted material synthesis, and metal intercalation chemistry.